journal article·2021-01Open access

Construction of a hierarchical multiscale conducting network for enhanced thermoelectric response in organic PEDOT:PSS based nanocomposites

Yong Zhang, Siqi Liu, J. Justin Koh, Chaobin He

Journal of Materiomics· Volume 7· Issue 1

Abstract

Thermoelectric technology, which is characterized by the interconversion between heat and electricity, is demonstrated as an efficient and environmentally friendly route for thermal energy harvesting and solid-state cooling devices. The pursuit for high-performance room temperature thermoelectric materials is of significant interest. Here, we proposed a design strategy to dramatically improve the thermoelectric response by constructing a hierarchical multiscale conductor network (AgNWs/CNT) in polymer matrix (PEDOT:PSS). At the optimized composition, the highest Seebeck coefficient and electrical conductivity of base treated ternary PEDOT:PSS/AgNWs/CNT composite are optimized to be 58.6 μV K−1 and ∼1950 S cm−1. Correspondingly, the power factor is thus calculated to be on the order of 670 μW m−1 K−2, which is among one of the highest values compared with previous reports. The underlying mechanism is illustrated based on detailed structure, morphology and electron transport quantification. This work affords a novel strategy for the future development of high-performance room temperature nanocomposite thermoelectrics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Conducting polymers and applications · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Nanotechnology-Enabled energy harvesting for self-powered micro-/nanosystems10.1002/anie.201201656 ↗
2. Flexible energy harvesting polymer composites based on biofibril-templated 3-dimensional interconnected piezoceramics10.1016/j.nanoen.2018.05.025 ↗
3. Bioinspired elastic piezoelectric composites for high-performance mechanical energy harvesting10.1039/C8TA03617A ↗
4. Self-powered flexible electronics beyond thermal limits10.1016/j.nanoen.2018.11.077 ↗
5. CNT flexible membranes for energy storage and conversion systems10.1557/mrc.2019.45 ↗
6. Band inversion induced multiple electronic valleys for high thermoelectric performance of SnTe with strong lattice softening10.1016/j.nanoen.2019.104395 ↗
7. Modulating photovoltaic conversion efficiency of BiFeO3-based ferroelectric films by the introduction of electron transport layers10.1021/acsaem.9b00722 ↗
8. Bi0.5Sb1.5Te3-based films for flexible thermoelectric devices10.1039/C9TA13152C ↗
9. Flexible ionic diodes for low-frequency mechanical energy harvesting10.1002/aenm.201601983 ↗
10. A one-structure-based hybridized nanogenerator for scavenging mechanical and thermal energies by triboelectric-piezoelectric-pyroelectric effects10.1002/adma.201505684 ↗
11. Enhanced mechanical energy harvesting capability in sodium bismuth titanate based lead-free piezoelectric10.1016/j.jallcom.2020.154020 ↗
12. Y. Zhang, H. Kim, Q. Wang, W. Jo, A. Kingon, S. Kim, C.K. Jeong, Progresses in lead-free piezoelectric nanofiller materials and related composite nanogenerator devices, Nanoscale Adv. Doi: 10.1039/C9NA00809H.10.1039/C9NA00809H ↗
13. Organic thermoelectric materials: emerging green energy materials converting heat to electricity directly and efficiently10.1002/adma.201305371 ↗
14. Ni and Se co-doping increases the power factor and thermoelectric performance of CoSbS10.1039/C8TA05572F ↗
15. Fabrication, dielectric, and thermoelectric properties of textured SrTiO3 ceramics prepared by RTGG method10.1016/j.ceramint.2014.08.045 ↗
16. Superparamagnetic enhancement of thermoelectric performance10.1038/nature23667 ↗
17. Ultrahigh power factor and flexible silver selenide-based composite film for thermoelectric devices10.1039/C9EE01609K ↗
18. Good performance and flexible PEDOT:PSS/Cu2Se nanowire thermoelectric composite films10.1021/acsami.9b01718 ↗
19. Ultrahigh performance PEDOT/Ag2Se/CuAgSe composite film for wearable thermoelectric power generators10.1016/j.mtphys.2020.100223 ↗
20. Progress on PEDOT:PSS/nanocrystal thermoelectric composites10.1002/aelm.201800822 ↗
21. Polycrystalline SnSe–Sn1–vS solid solutions: vacancy engineering and nanostructuring leading to high thermoelectric performance10.1016/j.nanoen.2019.104393 ↗
22. Point defect engineering of high-performance bismuth-telluride-based thermoelectric materials10.1002/adfm.201400474 ↗
23. High thermoelectric figure of merit ZT>1 in SnS polycrystals
24. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
25. High-performance electron-doped GeMnTe2 : hierarchical structure and low thermal conductivity10.1039/C9TA09972G ↗
26. Discordant nature of Cd in GeTe enhances phonon scattering and improves band convergence for high thermoelectric performance10.1039/C9TA10436D ↗
27. Graphene network in copper sulfide leading to enhanced thermoelectric properties and thermal stability10.1016/j.nanoen.2018.04.058 ↗
28. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
29. Thermoelectric power generation: from new materials to devices10.1098/rsta.2018.0450 ↗
30. Solution processed organic thermoelectrics: towards flexible thermoelectric modules10.1039/C4EE03297G ↗
31. Organic thermoelectric materials for energy harvesting and temperature control10.1038/natrevmats.2016.50 ↗
32. Side-chain effects on N-type organic thermoelectrics: a case study of fullerene derivatives10.1016/j.nanoen.2018.07.056 ↗
33. Feasible tuning of barrier energy in PEDOT:PSS/Bi2Te3 nanowires-based thermoelectric nanocomposite thin films through polar solvent vapor annealing10.1016/j.nanoen.2019.104207 ↗
34. Interfacial control and carrier tuning of carbon nanotube/polyaniline composites for high thermoelectric performance10.1016/j.carbon.2018.04.083 ↗
35. Efficient debundling of few-walled carbon nanotubes by wrapping with donor–acceptor polymers for improving thermoelectric properties10.1021/acsami.9b16012 ↗
36. Simultaneous enhancement of electrical conductivity and seebeck coefficient in organic thermoelectric SWNT/PEDOT:PSS nanocomposites10.1016/j.carbon.2019.04.007 ↗
37. Wet-spinning and post-treatment of CNT/PEDOT:PSS composites for use in organic fiber-based thermoelectric generators10.1016/j.carbon.2018.03.041 ↗
38. Thermoelectric properties of PEDOT:PSS10.1002/aelm.201800769 ↗
39. Engineered doping of organic semiconductors for enhanced thermoelectric efficiency10.1038/nmat3635 ↗
40. Ultrahigh performance of n-type Ag2Se films for flexible thermoelectric power generators10.1021/acsami.9b21069 ↗
41. Improving the thermoelectric power factor of CNT/PEDOT:PSS nanocomposite films by ethylene glycol treatment10.1039/C6RA08599G ↗
42. Enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) by binary secondary dopants10.1021/acsami.5b01960 ↗
43. Origin of unusual thermoelectric transport behaviors in carbon nanotube filled polymer composites after solvent/acid treatments10.1016/j.orgel.2017.03.007 ↗
44. Ultra-high electrical conductivity and superior bendability simultaneously enabled in Ag nanowire based nanocomposites10.1039/C7RA07714A ↗
45. Growth mechanism and electrical and magnetic properties of Ag–Fe3O4 core–shell nanowires10.1021/acsami.5b04342 ↗
46. Electronic transport properties of conducting polymers and carbon nanotubes10.1088/0034-4885/64/1/201 ↗
47. Abnormally enhanced thermoelectric transport properties of SWNT/PANI hybrid films by the strengthened PANI molecular ordering10.1039/C4EE01905A ↗
48. Influence of the polymer structure and nanotube concentration on the conductivity and rheological properties of polyethylene/CNT composites10.1016/j.physe.2008.02.001 ↗
49. In situ spectroelectrochemical Raman studies of poly(3,4-ethylenedioxythiophene) (PEDT)10.1021/ma9905674 ↗
50. Facile optimization of thermoelectric properties in PEDOT:PSS thin films through acido-base and redox dedoping using readily available salts10.1021/acsaem.7b00334 ↗
51. Enhanced thermoelectric properties of PEDOT:PSS films via a novel two-step treatment10.1039/C5RA22240K ↗
52. High-conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
53. Improving the thermoelectric power factor of CNT/PEDOT:PSS nanocomposite films by ethylene glycol treatment10.1039/C6RA08599G ↗
54. Highly improved thermoelectric performances of PEDOT:PSS/SWCNT composites by solvent treatment10.1016/j.orgel.2017.09.030 ↗
55. Light-weight flexible carbon nanotube based organic composites with large thermoelectric power factors10.1021/nn202868a ↗
56. Thermoelectric behavior of organic thin film nanocomposites10.1002/polb.23186 ↗
57. Temperature-dependent thermoelectric properties of individual silver nanowires10.1103/PhysRevB.91.024302 ↗
58. Preparation of bulk AgNWs/PEDOT:PSS composites: a new model towards high-performance bulk organic thermoelectric materials10.1039/C5RA05551B ↗