Greatly enhanced permittivity in BaTiO3-epoxy dielectric composites with improved connectivity of ceramic phase
Source abstract
Abstract
BaTiO3-epoxy dielectric composites were prepared by curing the liquid epoxy monomer that infiltrated into the partially-sintered BaTiO3 porous ceramics. The BaTiO3 volume fraction of the composites maintained around 58.6% with increasing the sintering temperature from 600 °C to 1000 °C, while the significant microstructure evolution, improved connectivity of BaTiO3 phase and dramatical increase in permittivity from 102 to 697 were observed. The permittivity and BaTiO3 volume fraction further increased to 2328 and 83.5% for the sintering temperature of 1250 °C. The present composites had the permittivity 1–2 orders of magnitude higher than the 0–3 type ones, and the extraordinary results were mainly attributed to the improved connectivity of BaTiO3 phase that benefited from partial sintering. The connectivity also had a significant effect on the temperature dependence of permittivity, and good combination of temperature-stable high permittivity, low dielectric loss and relatively low ceramic fraction could be obtained by regulating the connectivity of BaTiO3 ceramic phase.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Polymer–ceramic composites of 0–3 connectivity for circuits in electronics: a review10.1111/j.1744-7402.2009.02482.x ↗
2. Polyvinylidene fluoride-modified BaTiO3 composites with high dielectric constant and temperature stability10.1016/j.ceramint.2012.10.025 ↗
3. Dielectric properties of BST/polymer composite10.1016/j.jeurceramsoc.2007.02.082 ↗
4. BaTiO3 platelets and poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) hybrid composites for energy storage application10.1016/j.ymssp.2018.02.011 ↗
5. Dielectric properties of three ceramic/epoxy composites10.1016/j.matchemphys.2004.01.003 ↗
6. Dielectric behaviours of multi-doped BaTiO3/epoxy composites10.1016/S0955-2219(00)00327-7 ↗
7. Enhanced dielectric permittivity of BaTiO3/epoxy resin composites by particle alignment10.1016/j.ceramint.2016.01.103 ↗
8. Depolarization effects in polycrystalline BaTiO3
9. Polyimide/BaTiO3 composites with controllable dielectric properties10.1016/j.compositesa.2004.12.010 ↗
10. High dielectric constant polymer-ceramic (epoxy varnish-barium titanate) nanocomposites at moderate filler loadings for embedded capacitors10.1007/s11664-006-0307-6 ↗
11. Ba(Mg1/3Ta2/3)O3 filled PTFE composites for microwave substrate applications10.1016/j.matchemphys.2010.03.035 ↗
12. Construction of a 3D-BaTiO3 network leading to significantly enhanced dielectric permittivity and energy storage density of polymer composites10.1039/C6EE03190K ↗
13. Constructing three-dimensionally interwoven structures for ceramic/polymer composites to exhibit colossal dielectric constant and high mechanical strength: CaCu3Ti4O12/epoxy as an example10.1016/j.compositesa.2017.11.025 ↗
14. The role of interfaces on an apparent grain size effect on the dielectric properties for ferroelectric barium titanate ceramics10.1080/00150199808009168 ↗
15. Dielectric properties of unsintered barium titanate10.1063/1.1657443 ↗
16. Dielectric grain-size effect in high-permittivity ceramics10.1080/00150193.2010.505511 ↗
17. Dielectric constant for binary piezoelectric 0-3 composites10.1063/1.354057 ↗
18. Permittivity of porous titanate dielectrics10.1111/j.1551-2916.2006.01323.x ↗
19. A precise numerical prediction of effective dielectric constant for polymer-ceramic composite based on effective-medium theory10.1109/6144.888853 ↗
20. Laser micromachining of barium titanate (BaTiO3)-epoxy nanocomposite-based flexible/rollable capacitors: new approach for making library of capacitors10.1109/TEPM.2008.919337 ↗
21. Computational approach of dielectric permittivities in BaTiO3-epoxy composites10.1177/0021998308094543 ↗
22. Fabrication, characterization, properties and theoretical analysis of ceramic/PVDF composite flexible films with high dielectric constant and low dielectric loss10.1039/C3TA14107A ↗
23. Improvements and recent advances in nano composite capacitors using a colloidal technique
24. The synthesis and dielectric study of BaTiO3/polyimide nanocomposite films10.1016/j.mee.2005.06.003 ↗
25. A Study on dielectric constants of epoxy/SrTiO3 composite for embedded capacitor films (ECFs)10.1109/TADVP.2007.898614 ↗
26. Enhanced dielectric performance of BaTiO3/PVDF composites prepared by modified process for energy storage applications10.1109/TUFFC.2014.006666 ↗
27. Improving dielectric properties of PVDF composites by employing surface modified strong polarized BaTiO3 particles derived by molten salt method10.1021/acsami.5b05344 ↗
28. Grain-size effects on dielectric properties in barium titanate ceramics10.1063/1.322330 ↗