A novel approach for brazing MgF2 ceramic to TA15 alloy using AgCu/GH4169/Bi2O3B2O3ZnO composite braze fillers
Source abstract
Abstract
A two-step brazing process was successfully employed to join MgF2 ceramic and TA15 alloy using eutectic Ag-28Cu wt.% alloy and Bi2O3-B2O3-ZnO (BBZ) glass as fillers, by introducing a 100 μm-thick GH4169 interlayer. Multiscale characterization revealed that interdiffusion and reaction occurred at the joint interfaces. As a result, a reliable joint system consisting of TA15/TiCu/TiCu2Al/Ag(s,s)+Cu(s,s)/TiCu2Al/Ti-Cu- Ni+Ag-rich layer/GH4169/nano-oxide layer/glass/Mg3(BO3)F3+MgO+MgF2 reaction layer/MgF2 was formed. The GH4169-interlayer exhibited adaptive compatibility though its interaction with Ag-Cu and BBZ glass fillers, effectively accommodating strong interface bonding and thermal mismatch stress between TA15 and MgF2 substrates. It shows an excellent shear strength (32 MPa, at room temperature) as well as thermal cycling stability without any cracking or spallation observed after the 20 thermal shock cycles between room temperature and 300 °C. It provides valuable insights into designing highly reliable ceramic/metal joints that demonstrate superior stability and adaptability in specific applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Fluorination synthesis of MgF2 nanoparticles synthesized for manufacturing IR windows by hot-pressing10.1016/j.ceramint.2021.04.135 ↗
2. High temperature softening mechanism of powder metallurgy TA15 alloy
3. Development of Ti-Al-Ta-Nb-(Re) near-α high temperature titanium alloy: microstructure, thermal stability and mechanical properties10.1016/j.jmst.2021.08.066 ↗
4. Pressure-induced excellent corrosion resistance of Ti-45Al-8Nb alloy10.1016/j.matlet.2023.135446 ↗
5. Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: parameter optimization, heat treatment and mechanical performance10.1016/j.jmst.2020.05.004 ↗
6. Interface reaction and wetting in the CaF2/Me systems10.1016/j.jallcom.2006.11.213 ↗
7. Wetting of calcium fluoride by liquid metals10.1007/s10853-012-6680-z ↗
8. Wetting induced by near-surface Ti-enrichment in the CaF2/In–Ti and CaF2/Cu–Ti systems10.1016/j.msea.2007.10.103 ↗
9. Surface hydroxyl modification for silicate-stabilized low-melting glassy tellurite adhesive enabling low resistance of silver conductive paste10.1016/j.jnoncrysol.2022.121959 ↗
10. Laser soldering of sapphire substrates using a BaTiAl6O12 thin-film glass sealant10.1016/j.optlastec.2016.02.008 ↗
11. Microstructure, mechanical property and bonding mechanism of SiC ceramic joint using a novel Y2Si2O7/Mullite glass-ceramic interlayer10.1016/j.ceramint.2023.02.155 ↗
12. Crystallization behavior of BaO–CaO–SiO2–B2O3 glass sealant and adjusting its thermal properties for oxygen transport membrane joining application10.1016/j.jeurceramsoc.2022.12.063 ↗
13. Novel glass-ceramic composition as sealant for SOFCs10.1111/jace.13219 ↗
14. Joining transparent spinel ceramics using refractive index–matched glass10.1016/j.jeurceramsoc.2022.02.041 ↗
15. Interfacial evolution mechanism of MgAl2O4/MgAl2O4 joints bonded with lanthanum glass10.1016/j.jeurceramsoc.2023.04.051 ↗
16. High strength and high light transmittance sapphire/sapphire joints bonded using a La2O3-Al2O3-SiO2 glass filler10.1016/j.jeurceramsoc.2022.04.038 ↗
17. The application of Lu-Al-Si-O-N oxynitride glass in transparent AlON ceramics joining10.1016/j.ceramint.2018.10.193 ↗
18. Effect of minor Sc modification on the high-temperature oxidation behavior of near-α Ti alloy10.1016/j.corsci.2023.111122 ↗
19. Effect of microstructure on oxygen rich layer evolution and its impact on fatigue life during high-temperature application of α/β titanium10.1016/j.actamat.2016.01.058 ↗
20. Investigation on the microstructure, mechanical and electrical properties of Ti3SiC2/Cu joint obtained by Ti25Zr25Ni25Cu25 amorphous high entropy alloy and Ag composite filler
21. Silver particle interlayer with high dislocation density for improving the joining of BaZr0.1Ce0.7Y0.1Yb0.1O3- electrolyte and AISI 441 interconnect10.1016/j.jmat.2022.02.014 ↗
22. Finite element analysis for residual stress of TC4/Inconel718 functionally gradient materials produced by laser additive manufacturing10.1016/j.optlastec.2022.108146 ↗
23. Microstructure and high temperature oxidation resistance of nickel based alloy GH4169 irradiated by high current pulsed electron beam10.1016/j.surfcoat.2016.11.041 ↗
24. Brazing of metallized SiC ceramic to GH99 superalloy using graphene nanoplatelets reinforced AgCuTi composite filler10.1016/j.ceramint.2019.01.227 ↗
25. Design TiZrCuNi filler materials for vacuum brazing TA15 alloy10.1016/j.jmapro.2020.02.021 ↗
26. Microstructure and mechanical properties of TiAl alloy joints vacuum brazed with Ti–Zr–Ni–Cu brazing powder without and with Mo additive10.1016/j.matdes.2015.11.008 ↗
27. Microstructure evolution and mechanical properties of high Nb–TiAl alloy/GH4169 joints brazed using CuTiZrNi amorphous filler alloy10.1016/j.intermet.2021.107351 ↗
28. Microstructure and properties of the C/C-superalloy brazed joint by Ni-based filler10.1016/j.ceramint.2022.01.122 ↗
29. Effect of Ti content on microstructure and mechanical properties of SiCf/SiC composites/GH536 superalloy joints brazed with CoFeCrNiCuTi high entropy filler10.1016/j.jmapro.2022.11.045 ↗
30. First-principles study of the structural, electronic and optical properties of MgF210.1016/j.ijleo.2018.03.010 ↗
31. Selective laser melting additive manufactured Inconel 718 superalloy parts: high-temperature oxidation property and its mechanisms10.1016/j.optlastec.2014.03.008 ↗
32. Interfacial reaction behavior and mechanical characterization of ZrO2/TC4 joint brazed by Ag–Cu filler metal10.1016/j.msea.2015.08.067 ↗
33. Microstructure and mechanical properties of Si3N4 ceramic and (TiB + Y2O3)/Ti matrix composite joints brazed with AgCu/Cu foam/AgCu multilayered filler10.1016/j.jmapro.2021.04.025 ↗
34. Oxidation behaviour of MgF2 in Ag–MgF2 cermet10.1016/S0042-207X(99)00121-9 ↗
35. Study of structure of MgF2 with increasing temperature