Enhanced thermoelectric performance in MnTe due to doping and in-situ nanocompositing effects by Ag2S addition
Source abstract
Abstract
Extremely low lattice thermal conductivity is always the pursuit of thermoelectric materials research. In this work, we reported an exceptional effect of Ag2S addition in MnTe, an emerging promising mid-temperature thermoelectric material, to enable the realization of minimum lattice thermal conductivity, namely ∼0.4 Wm−1K−1. Such a low lattice thermal conductivity is guaranteed by the incorporation of in-situ formed Ag rich phase (Ag2Te) with ultralow lattice thermal conductivity and further scattering of phonons from the partial doping effects induced point defects and boundaries between various phases. Apart from the dramatically decreased lattice thermal conductivity, the partial doping of Ag and S simultaneously enhance the electrical conductivity, further contributing to enhanced thermoelectric performance. Meanwhile, an inverse sign of Seebeck and Hall coefficient was observed and rationalized by the influence of highly electron-conductive Ag2Te phase. Thanks to the synergetic modulation of electrical and thermal transport properties by in-situ formed composite, a high ZT value of 1.1 was achieved in MnTe based thermoelectric materials, which also demonstrates the importance of compositing approaches to design state-of-the-art thermoelectric materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Complex thermoelectric materials10.1038/nmat2090 ↗
3. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
4. How to measure thermoelectric properties reliably10.1016/j.joule.2018.10.020 ↗
5. Compromise and synergy in high-efficiency thermoelectric materials10.1002/adma.201605884 ↗
6. Promising materials for thermoelectric applications10.1016/j.jallcom.2019.07.147 ↗
7. Thermoelectric materials: energy conversion between heat and electricity10.1016/j.jmat.2015.01.001 ↗
8. Energy-band structure and electronic-properties of NiAs type compounds .2. Anti-ferromagnetic manganese telluride10.1002/pssb.2221040111 ↗
9. Thermoelectric properties of non-stoichiometric MnTe compounds10.1007/s13391-013-0035-z ↗
10. Seeking new, highly effective thermoelectrics10.1126/science.aaz9426 ↗
11. Synergistic effect by Na doping and S substitution for high thermoelectric performance of p-type MnTe10.1039/C7TC01480E ↗
12. Lead-free MnTe mid-temperature thermoelectric materials: facile synthesis, p-type doping and transport properties10.1039/C8TC00904J ↗
13. Ultrafast synthesis and thermoelectric properties of Mn1+xTe compounds10.1021/acsami.8b07255 ↗
14. Thermoelectric properties of Mn1+xTe-based compounds densified using high-pressure sintering10.1007/s11664-016-5019-y ↗
15. Performance optimization and single parabolic band behavior of thermoelectric MnTe10.1039/C7TA04842D ↗
16. Enhanced thermoelectric performance of MnTe via Cu doping with optimized carrier concentration10.1016/j.jmat.2016.05.008 ↗
17. Reinforced bond covalency and multiscale hierarchical architecture to high performance eco-friendly MnTe-based thermoelectric materials10.1016/j.nanoen.2019.01.003 ↗
18. Paramagnon drag in high thermoelectric figure of merit Li-doped MnTe10.1126/sciadv.aat9461 ↗
19. Manipulation of phonon transport in thermoelectrics10.1002/adma.201705617 ↗
20. Medium-temperature thermoelectric GeTe: vacancy suppression and band structure engineering leading to high performance10.1039/C9EE00317G ↗
21. The criteria for beneficial disorder in thermoelectric solid solutions10.1002/adfm.201201576 ↗
22. Remarkable roles of Cu to synergistically optimize phonon and carrier transport in n-type PbTe-Cu2Te10.1021/jacs.7b11662 ↗
23. Vacancy-induced dislocations within grains for high-performance PbSe thermoelectrics10.1038/ncomms13828 ↗
24. Lattice strain advances thermoelectrics10.1016/j.joule.2019.02.008 ↗
25. Arrays of planar vacancies in superior thermoelectric Ge1−x−yCdxBiyTe with band convergence10.1002/aenm.201801837 ↗
26. High thermoelectric performance achieved in GeTe–Bi2Te3 pseudo-binary via van der Waals gap-induced hierarchical ferroelectric domain structure10.1002/adfm.201806613 ↗
27. Cubic AgPbmSbTe2+m: bulk thermoelectric materials with high figure of merit10.1126/science.1092963 ↗
28. High-performance electron-doped GeMnTe2: hierarchical structure and low thermal conductivity10.1039/C9TA09972G ↗
29. Synergetic enhancement of thermoelectric performance by selective charge anderson localization-delocalization transition in n-type Bi-doped PbTe/Ag2Te nanocomposite10.1021/acsnano.8b08579 ↗
30. Tailoring thermoelectric transport properties of Ag-alloyed PbTe: effects of microstructure evolution10.1021/acsami.8b15204 ↗
31. Extraordinary thermoelectric performance realized in n-type PbTe through multiphase nanostructure engineering10.1002/adma.201703148 ↗
32. Thermoelectric study of crossroads material MnTe via sulfur doping10.1063/1.4868584 ↗
33. Reducing lattice thermal conductivity of MnTe by Se alloying toward high thermoelectric performance10.1021/acsami.9b10207 ↗
34. Simultaneous regulation of electrical and thermal transport properties in MnTe chalcogenides via the incorporation of p-type Sb2Te310.1039/C8TA08830F ↗
35. Room-temperature ductile inorganic semiconductor10.1038/s41563-018-0047-z ↗
36. Effective ionic radii in oxides and fluorides10.1107/S0567740869003220 ↗
37. Measurements of the energy band gap and valence band structure of AgSbTe210.1103/PhysRevB.77.245204 ↗
38. Generalized effective-medium approach to conductivity of an inhomogeneous material10.1103/PhysRevB.12.3368 ↗
39. Determining conductivity and mobility values of individual components in multiphase composite Cu1.97Ag0.03Se10.1063/1.4897435 ↗
40. Alloying to increase the band gap for improving thermoelectric properties of Ag2Te10.1039/c1jm13888j ↗
41. MnS incorporation into higher manganese silicide yields a green thermoelectric composite with high performance/price ratio10.1002/advs.201800626 ↗
42. MnTe2 as a novel promising thermoelectric material10.1016/j.jmat.2018.04.001 ↗
43. Lower limit to the thermal conductivity of disordered crystals10.1103/PhysRevB.46.6131 ↗
44. Rationalizing phonon dispersion for lattice thermal conductivity of solids10.1093/nsr/nwy097 ↗