Proton irradiation-induced cracking and microstructural defects in UN and (U,Zr)N composite fuels
Source abstract
Abstract
Proton irradiation with a primary ion energy of 2 MeV was used to simulate radiation damage in UN and (U,Zr)N fuel pellets. The pellets, nominally at room temperature, were irradiated to peak levels of 0.1, 1, 10 dpa and 100 dpa resulting in a peak hydrogen concentration of at most 1 at. %. Microstructure and mechanical properties of the samples were investigated and compared before and after irradiation. The irradiation induced an increase in hardness, whereas a decrease in Young’s modulus was observed for both samples. Microstructural characterization revealed irradiation-induced cracking, initiated in the bulk of the material, where the peak damage was deposited, propagating towards the surface. Additionally, transmission electron microscopy (TEM) was used to study irradiation defects. Dislocation loops and fringes were identified and observed to increase in density with increasing dose levels. The high density of irradiation defects is proposed as the main cause of swelling and consequent sample cracking, leading simultaneously to increased hardening and a decrease in Young’s modulus.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Nitride fuel for Gen IV nuclear power systems10.1007/s10967-018-6316-0 ↗
2. Nitrides as a nuclear fuel option10.1016/j.jeurceramsoc.2005.03.181 ↗
3. Prospects for using nitride fuel in fast reactors with a closed nuclear fuel cycle10.1007/s10512-014-9893-1 ↗
4. An analytic approach to the design of passively safe lead-cooled reactors10.1016/j.anucene.2022.108971 ↗
5. Design of SEALER, a very small lead-cooled reactor for commercial power production in off-grid applications10.1016/j.nucengdes.2018.07.031 ↗
6. Brest lead-cooled fast reactor: from concept to technological implementation10.1007/s10512-021-00731-w ↗
7. Impact of accident-tolerant fuels and claddings on the overall fuel cycle: a preliminary systems analysis10.13182/NT14-22 ↗
8. Thermophysical and thermodynamic properties of actinide mononitrides and their solid solutions10.1016/S0925-8388(98)00160-1 ↗
9. Material property correlations for uranium mononitride. III. Transport properties10.1016/0022-3115(90)90376-X ↗
10. Porosity dependence of thermal conductivity of uranium mononitride10.1016/0022-3115(73)90162-1 ↗
11. XPS and XRD studies of corrosion of uranium nitride by water10.1016/S0925-8388(98)00157-1 ↗
12. Bailly · 1999
13. Mononitride fuel for fast reactors10.1023/B:ATEN.0000007886.86817.32 ↗
14. Fabrication and testing of uranium nitride fuel for space power reactors10.1016/0022-3115(88)90029-3 ↗
15. Irradiation performance of nitride fuels
16. Potter
17. Wullaert · 1963
18. Post irradiation examination from separate effects irradiation testing of uranium nitride kernels and coated particles10.1016/j.jnucmat.2020.152696 ↗
19. Heidrich · 2017
20. Proton irradiation-induced blistering in UO210.1557/s43580-021-00149-3 ↗
21. 2.6MeV proton irradiation effects on the surface integrity of depleted UO210.1016/j.nimb.2013.11.014 ↗
22. Microstructure changes and thermal conductivity reduction in UO2 following 3.9 MeV He2+ ion irradiation10.1016/j.jnucmat.2014.07.053 ↗
23. Phase and defect evolution in uranium-nitrogen-oxygen system under irradiation10.1016/j.actamat.2021.116778 ↗
24. Dislocation loops in proton irradiated uranium-nitrogen-oxygen system10.1016/j.jnucmat.2021.153244 ↗
25. Srim - the stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
26. Manufacture of fully dense uranium nitride pellets using hydride derived powders with spark plasma sintering10.1016/j.jnucmat.2014.06.012 ↗
27. Malkki · 2015
28. Potential accident tolerant fuel candidate: investigation of physical properties of the ternary phase U2CrN310.1016/j.jnucmat.2022.153851 ↗
29. Grain growth in uranium nitride prepared by spark plasma sintering10.1016/j.jnucmat.2018.02.041 ↗
30. Carbothermal nitridation of solution synthesised ZrO2–carbon nanocomposites; phase-development from precursor to nitride10.1016/j.ceramint.2020.12.200 ↗
31. Thermal and mechanical properties of uranium nitride prepared by SPS technique10.1007/s10853-008-2731-x ↗
32. On the use of SRIM for computing radiation damage exposure10.1016/j.nimb.2013.05.008 ↗
33. Radiation stability of ZrN under 2.6 MeV proton irradiation10.1016/j.jnucmat.2009.03.040 ↗
34. Ab initio molecular dynamics study of threshold displacement energy in zirconium nitride10.1016/j.jnucmat.2021.153076 ↗
35. The scanning light ion microprobe in Uppsala – status in 202210.1016/j.nimb.2022.10.017 ↗
36. Profex: a graphical user interface for the Rietveld refinement program BGMN10.1107/S1600576715014685 ↗
37. Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration10.1093/nar/gkr900 ↗
38. Basic image analysis and manipulation in ImageJ10.1002/0471142727.mb1415s102 ↗
39. In situ lift-out: steps to improve yield and a comparison with other FIB TEM sample preparation techniques10.1016/j.micron.2008.02.006 ↗
40. Electron-beam assisted platinum deposition as a protective layer for FIB and TEM applications
41. Interface interactions in UN-X-UO2 systems (X = V, Nb, Ta, Cr, Mo, W) by pressure-assisted diffusion experiments at 1773 K10.1016/j.jnucmat.2022.153554 ↗
42. Formation of uranium mononitride by the reaction of uranium dioxide with carbon in ammonia and a mixture of hydrogen and nitrogen— I synthesis of high purity UN10.1016/0022-3115(77)90187-8 ↗
43. Uranium nitrides10.1016/0022-3115(63)90115-6 ↗
44. Material property correlations for uranium mononitride: I. Physical properties10.1016/0022-3115(90)90374-V ↗
45. X-ray absorption fine structure spectroscopic study of uranium nitrides10.1007/s10967-011-1551-7 ↗
46. Vegard’s law10.1103/PhysRevA.43.3161 ↗
47. Johnson · 2016
48. Mechanical properties at sub-microscale and macroscale of polycrystalline uranium mononitride10.1016/j.jnucmat.2008.09.019 ↗
49. Material property correlations for uranium mononitride: II. Mechanical properties10.1016/0022-3115(90)90375-W ↗
50. Young’s modulus of TiN, TiC, ZrN and HfN. Thin solid films
51. Microstructural characterization and nanoindentation of Zr, Zr-nitride and Zr-carbonitride coatings deposited using magnetron sputtering
52. Porosity influence on the mechanical properties of polycrystalline zirconium nitride ceramics10.1016/j.jnucmat.2006.07.002 ↗
53. In-situ observation of microstructure change in steel by EBSD
54. The role of point defects in the swelling and elastic modulus of irradiated cubic silicon carbide10.1016/j.nimb.2015.04.059 ↗
55. Evaluating the irradiation effects on the elastic properties of miniature monolithic SiC tubular specimens10.1016/j.jnucmat.2017.10.060 ↗