journal article·2021-03Open access

Incorporating element doping and quantum dot embedding effects to enhance the thermoelectric properties of higher manganese silicides

Qing Wang, Shiyu Song, Xiaofeng Yang, Ziyang Liu, Yufei Ma, Xingyuan San, Jianglong Wang, Dan Zhang, Shu-Fang Wang, Zhiliang Li

Journal of Materiomics· Volume 7· Issue 2

Abstract

Element doping and nano-inclusion embedding are effective approaches to enhance the electrical conductivities and decrease the lattice thermal conductivities of thermoelectric (TE) materials, respectively. However, the intrinsic low electrical thermal conductivities and high electrical properties are severely sacrificed, and the final figure of merit (ZT) is usually restricted. In this study, Ag doping and Pt quantum dot (QD) embedding were synchronously achieved via embedding Ag/Pt alloy QDs into the higher manganese silicides to avoid the conventional single-element doping strategy. The power factor (at 823 K) was enhanced from 1.57 × 10−3 W m−1 K−2 to 1.82 × 10−3 W m−1 K−2 (∼16%) due to the ∼18% increase in carrier concentration that was derived from the Ag doping effect. Simultaneously, the lattice thermal conductivity (at 823 K) decreased from 2.65 W m−1 K−1–1.92 W m−1 K−1 (∼28%) because of the broadband phonon scattering effect that resulted from the residual Pt QDs inclusions. Synthetically, the optimal ZT value increased by ∼52% from 0.42 to 0.64 at 823 K. This study demonstrated that incorporating metastable alloy QDs to obtain element doping and nano-inclusion embedding effects is a novel and feasible means to enhance the ZT value of HMS. This method is also possibly applicable to other alloy QD/TE composites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Complex thermoelectric materials10.1038/nmat2090 ↗
3. Seeking new, highly effective thermoelectrics10.1126/science.aaz9426 ↗
4. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
5. High thermoelectric performance in electron-doped AgBi3S5 with ultralow thermal conductivity10.1021/jacs.7b02399 ↗
6. Estimation of the potential performance in p-type SnSe crystals through evaluating weighted mobility and effective mass10.1016/j.jmat.2020.06.003 ↗
7. Thermoelectric cooling and power generation10.1126/science.285.5428.703 ↗
8. Thin-film thermoelectric devices with high room-temperature figures of merit10.1038/35098012 ↗
9. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
10. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
11. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe-SrTe10.1038/ncomms12167 ↗
12. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
13. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe10.1126/science.aad3749 ↗
14. Low-cost and environmentally benign selenides as promising thermoelectric materials10.1016/j.jmat.2018.07.001 ↗
15. Partial indium solubility induced chemical stability and colossal thermoelectric figure of merit in Cu2Se10.1039/C7EE01193H ↗
16. Eco-friendly higher manganese silicide thermoelectric materials: progress and future challenges10.1002/aenm.201800056 ↗
17. Improved thermoelectric properties of Re-substituted higher manganese silicides by inducing phonon scattering and an energy-filtering effect at grain boundary interfaces10.1021/acsami.9b09397 ↗
18. Enhanced thermoelectric performance of higher manganese silicides by shock-induced high-density dislocations10.1039/C8TA11292D ↗
19. Significant enhancement in thermoelectric performance of nanostructured higher manganese silicides synthesized employing a melt spinning technique10.1039/C7NR06195A ↗
20. Synthesis of thermoelectric manganese silicide by mechanical alloying and pulse discharge sintering10.1007/s11664-009-0697-3 ↗
21. Synthesis, characterization, and thermoelectric properties of nanostructured bulk p-type MnSi1.73, MnSi1.75, and MnSi1.7710.1016/j.ceramint.2012.08.086 ↗
22. Enhanced power factor of higher manganese silicide via melt spin synthesis method10.1063/1.4905243 ↗
23. Effects of (Al, Ge) double doping on the thermoelectric properties of higher manganese silicides10.1063/1.4828731 ↗
24. Improved thermoelectric performance of higher manganese silicides with Ge additions10.1007/s11664-009-1034-6 ↗
25. Improved thermoelectric properties of Al-doped higher manganese silicide prepared by a rapid solidification method10.1007/s11664-011-1612-2 ↗
26. The role of simultaneous substitution of Cr and Ru on the thermoelectric properties of defect manganese silicides MnSiδ (1.73 < δ < 1.75)10.1016/j.jallcom.2013.07.136 ↗
27. Crystal structure and thermoelectric properties of lightly vanadium-substituted higher manganese silicides (Mn1−xVx)Siγ10.1007/s11664-016-4937-z ↗
28. Preparation of pure higher manganese silicides through wet ball milling and reactive sintering with enhanced thermoelectric properties10.1016/j.intermet.2015.07.002 ↗
29. Rapid synthesis of high thermoelectric performance higher manganese silicide with in-situ formed nano-phase of MnSi10.1016/j.intermet.2010.11.008 ↗
30. Thermoelectric properties of undoped high purity higher manganese silicides grown by chemical vapor transport10.1021/cm5023823 ↗
31. Microstructure investigations and thermoelectrical properties of a p-type polycrystalline higher manganese silicide material sintered from a gas-phase atomized powder10.1016/j.jallcom.2014.08.164 ↗
32. Facile synthesis of higher manganese silicide employing spark plasma assisted reaction sintering with enhanced thermoelectric performance10.1016/j.scriptamat.2016.03.026 ↗
33. Approaching the minimum thermal conductivity in rhenium-substituted higher manganese silicides10.1002/aenm.201400452 ↗
34. Crystal structure and thermoelectric properties of chimney-ladder compounds in the Ru2Si3-Mn4Si7 pseudobinary system10.1016/j.actamat.2009.07.005 ↗
35. Composites of higher manganese silicides and nanostructured secondary phases and their thermoelectric properties10.1007/s11664-009-0774-7 ↗
36. Microstructure and thermoelectric properties of SiGe-added higher manganese silicides10.1016/j.matchemphys.2010.08.017 ↗
37. Silicon-Rich Higher manganese silicides for thermoelectric applications10.1007/s11664-012-1936-6 ↗
38. Submicron features in higher manganese silicide10.1155/2013/701268 ↗
39. Thermoelectric properties of the quasi-binary MnSi1.73-FeSi2 system10.1007/s11664-014-3500-z ↗
40. Enhanced thermoelectric power factor of Re-substituted higher manganese silicides with small islands of MnSi secondary phase10.1039/C5TC01536G ↗
41. Thermoelectric properties of supersaturated Re solid solution of higher manganese silicides10.7567/JJAP.55.020301 ↗
42. Phase formation and thermoelectric properties of doped higher manganese silicides (Mn15Si26)10.1007/s11664-016-5035-y ↗
43. Significant enhancement of the thermoelectric performance of higher manganese silicide by incorporating MnTe nanophase derived from Te nanowire10.1021/acs.chemmater.7b02270 ↗
44. MnS incorporation into higher manganese silicide yields a green thermoelectric composite with high performance/price ratio10.1002/advs.201800626 ↗
45. High thermoelectric performance of higher manganese silicides prepared by ultra-fast thermal explosion10.1039/C5TC02837J ↗
46. Effect of Si content on the thermoelectric transport properties of Ge-doped higher manganese silicides10.1016/j.scriptamat.2017.03.011 ↗
47. Crystal structure and thermoelectric properties of lightly substituted higher manganese silicides10.3390/ma11060926 ↗
48. The promise of low-dimensional thermoelectric materials10.1080/108939599199774 ↗
49. Enhanced thermoelectric performance of rough silicon nanowires10.1038/nature06381 ↗
50. Effects of ball milling on microstructures and thermoelectric properties of higher manganese silicides10.1016/j.jallcom.2015.04.048 ↗
51. Bimetallic Ag–hollow Pt heterodimers via inside-out migration of Ag in core–shell Ag–Pt nanoparticles at elevated temperature10.1039/C4TA00243A ↗
52. Koumoto · 2013
53. Distinct impact of alkali-ion doping on electrical transport properties of thermoelectric p-type polycrystalline SnSe10.1021/jacs.6b04181 ↗
54. The maximum possible conversion efficiency of silicon-germanium thermoelectric generators10.1063/1.349385 ↗
55. Energy filtering of charge carriers: current trends, challenges, and prospects for thermoelectric materials10.1002/adfm.201901789 ↗
56. On the tuning of electrical and thermal transport in thermoelectrics: an integrated theory–experiment perspective10.1038/npjcompumats.2015.15 ↗
57. Thermoelectric properties of cold-pressed higher manganese silicides for waste heat recovery10.1007/s11664-012-1987-8 ↗