Polydopamine/carbon nanotube nanocomposite coating for corrosion resistance
Source abstract
Abstract
Carbon nanotube (CNT) has excellent properties as a coating material. However, most methods for CNT coating have limitations. Recent studies have shown that polydopamine (PDA) can be used as a good and eco-friendly corrosion resistance coating material. However, the effect of PDA/CNT nanocomposite coating on the corrosion mitigation property of carbon steel (CS) remains unknown. Therefore, the objective of this study was to determine the effect of PDA/CNT nanocomposite coating on the corrosion mitigation property of carbon steel (CS). A dopamine (DA)/CNT composite was first synthesized. CNT length was controlled by sonication. Based on dynamic light scattering, field emission transmission electron microscopy, and atomic force microscopy analyses, average lengths of CNTs in long and short DA-CNTs were 500 and 50 nm, respectively. Carbon steel specimens were subjected to corrosion resistance analysis using electrochemical methods. Results of electrochemical tests showed that corrosion resistance of CS coated with PDA and PDA/CNTs were dramatically higher than those of bare CS. This corrosion mitigation was attributed to two mechanisms. First, PDA decreased the corrosion rate due to the generation of a thin and dense layer on the surface. Second, CNTs suppressed the cathodic partial reaction due to oxygen adsorption at defect sites of CNTs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Conducting polymers and applications · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Biocompatible and antifouling coating of cell membrane phosphorylcholine and mussel catechol modified multi-arm PEGs10.1039/C4TB02140A ↗
2. Polydopamine nanomembranes as adhesion layers for improved corrosion resistance in low carbon steel10.1002/adem.201800621 ↗
3. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
4. Kinetics of polydopamine film deposition as a function of pH and dopamine concentration: insights in the polydopamine deposition mechanism10.1016/j.jcis.2012.07.030 ↗
5. Mussel-inspired polydopamine: a biocompatible and ultrastable coating for nanoparticles in vivo10.1021/nn404117j ↗
6. In situ formation of gold nanoparticles on magnetic halloysite nanotubes via polydopamine chemistry for highly effective and recyclable catalysis10.1039/C6RA02789J ↗
7. Polydopamine-coated separator for high-performance lithium-sulfur batteries10.1007/s10008-015-2797-8 ↗
8. Corrosion properties of polydopamine coatings formed in one-step immersion process on magnesium10.1021/acsami.5b08760 ↗
9. Thermal conductance of an individual single-wall carbon nanotube above room temperature10.1021/nl052145f ↗
10. Quantum transport in carbon nanotubes10.1016/S1567-1739(01)00089-X ↗
11. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
12. The world of carbon nanotubes: an overview of CVD growth methodologies10.1002/cvde.200600030 ↗
13. Coating of carbon nanotubes with tungsten by physical vapor deposition10.1016/S0038-1098(00)00125-3 ↗
14. Investigation of galvanic corrosion between AISI 1018 carbon steel and CFRPs modified with multi-walled carbon nanotubes10.1007/s10853-012-6876-2 ↗
15. Preparation of silica-layered multi-walled carbon nanotubes activated by grafting of poly(4-vinylpyridine)10.1016/j.synthmet.2008.07.019 ↗
16. Synthesis and electroconductivity of epoxy/aligned CNTs composites10.1016/j.apsusc.2012.12.162 ↗
17. Carbon nanotube-inorganic hybrids10.1021/cr800433k ↗
18. Electrical and mechanical behavior of PMN-PT/CNT based polymer composite film for energy harvesting10.1016/j.apsusc.2017.09.077 ↗
19. Carbon nanotube-reinforced siloxane-PMMA hybrid coatings with high corrosion resistance10.1016/j.porgcoat.2012.11.015 ↗
20. Dissolution and alkylation of industrially produced multi-walled carbon nanotubes10.1016/j.carbon.2010.08.057 ↗
21. Removal of oxidation debris from multi-walled carbon nanotubes10.1039/B611930A ↗
22. Enhanced hydrogen evolution reaction on few-layer MoS2 nanosheets-coated functionalized carbon nanotubes10.1016/j.ijhydene.2015.05.062 ↗
23. Asymmetric electrochemical supercapacitor, based on polypyrrole coated carbon nanotube electrodes10.1016/j.apenergy.2014.12.010 ↗
24. Polydopamine coated single-walled carbon nanotubes as a versatile platform with radionuclide labeling for multimodal tumor imaging and therapy10.7150/thno.16047 ↗
25. Correction of the tip convolution effects in the imaging of nanostructures studied through scanning force microscopy10.1088/0957-4484/25/39/395703 ↗
26. Preparation, morphology and electrical conductivity of polystyrene/polydopamine-carbon nanotube microcellular foams via high internal phase emulsion polymerization10.7317/pk.2015.39.2.293 ↗
27. Cutting-processed single-wall carbon nanotubes with additional edge sites for supercapacitor electrodes10.3390/nano8070464 ↗
28. Dopamine-triggered one-step polymerization and codeposition of acrylate monomers for functional coatings10.1021/acsami.7b11092 ↗
29. The photoelectrocatalytic activity, long term stability and corrosion performance of NiMo deposited titanium oxide nano-tubes for hydrogen production in alkaline medium10.1016/j.apsusc.2017.06.216 ↗
30. Effect of incorporating MoS2 in organic coatings on the corrosion resistance of 316L stainless steel in a 3.5% NaCl solution10.3390/coatings9010045 ↗
31. A comparative outlook of corrosion behaviour and chlorophyll assisted growth kinetics of various carbon nano-structure reinforced hydroxyapatite-calcium orthophosphate coating synthesized in-situ through pulsed electrochemical deposition10.1016/j.apsusc.2018.12.217 ↗
32. Jones · 1992
33. Extreme oxygen sensitivity of electronic properties of carbon nanotubes10.1126/science.287.5459.1801 ↗
34. Theoretical study of oxygen adsorption on graphite and the (8,0) single-walled carbon nanotube10.1021/jp0122979 ↗
35. Oxygen doping modifies near-infrared band gaps in fluorescent single-walled carbon nanotubes10.1126/science.1196382 ↗
36. Quantification of surface oxides on carbonaceous materials10.1021/cm051462k ↗
37. Chemical and structural characterization of carbon nanotube surfaces10.1007/s00216-009-3332-5 ↗
38. Multiwalled carbon nanotube oxygen sensor: enhanced oxygen sensitivity at room temperature and mechanism of sensing10.1021/acsami.5b04869 ↗
39. Electronic structures of single-walled carbon nanotubes determined by NMR10.1126/science.288.5465.492 ↗