journal article·2023-09Open access

Enhancing thermoelectric performance of n-type AgBi3S5 through synergistically optimizing the effective mass and carrier mobility

Xin Qian, Xiaoxue Zhang, Haoran Guo, Bangfu Ding, Mingjing Chen, Jiang-Long Wang, Li-Dong Zhao, Shu-Fang Wang

Journal of Materiomics· Volume 9· Issue 5

Abstract

AgBi3S5 is a new n-type thermoelectric material that is environmentally friendly and composed of elements of earth-abundant, non-toxic and high performance-cost ratio. This compound features an intrinsically low thermal conductivity derived from its complex monoclinic structure. However, the terrible electrical transport properties greatly limited the improvement of thermoelectric performance. Most previous studies considered that carrier concentration is the main reason for low electrical conductivity and focused on improving carrier concentration by aliovalent ion doping. In this work, we found that the critical parameter that restricts the electric transport performance of AgBi3S5 was the extremely low carrier mobility instead of the carrier concentration. According to the Pisarenko relationships and density functional theory calculations, Nb doping can sharpen the conduction band of AgBi3S5, which contributes to reducing the effective mass and improving the carrier mobility. With a further increase of the Nb doping content, the conduction band convergence can enlarge the effective mass and preserve the carrier mobility. Combined with the decrease in lattice thermal conductivity due to the intensive phone scattering, a maximum ZT value of ∼0.50 at 773 K was achieved in Ag0.97Nb0.03Bi3S5, which was ∼109.6% higher than that of pure AgBi3S5. This work will stimulate the new exploration of high-performance thermoelectric materials in ternary metal sulfides.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Realizing high-ranged thermoelectric performance in PbSnS2 crystals10.1038/s41467-022-33684-0 ↗
2. Power generation and thermoelectric cooling enabled by momentum and energy multiband alignments10.1126/science.abi8668 ↗
3. Ultrahigh carrier mobility contributes to remarkably enhanced thermoelectric performance in n-type PbSe10.1039/D1EE03339E ↗
4. Bridging the miscibility gap towards higher thermoelectric performance of PbS10.1016/j.actamat.2021.117337 ↗
5. Unconventional doping effect leads to ultrahigh average thermoelectric power factor in Cu3SbSe4-based composites
6. Interdisciplinary exploration between magnetism and thermoelectricity10.1016/j.scib.2022.01.015 ↗
7. Enhanced thermoelectric performance of n-type transformable AgBiSe2 polymorphs by indium doping10.1063/1.4963779 ↗
8. High thermoelectric performance in the new cubic semiconductor AgSnSbSe3 by high-entropy engineering10.1021/jacs.0c07803 ↗
9. Achieving superior performance in thermoelectric Bi0.4Sb1.6Te3.72 by enhancing texture and inducing high-density line defects10.1007/s40843-020-1548-x ↗
10. Enhancing thermoelectric performance of n-type PbSe via additional meso-scale phonon scattering10.1039/C7QI00051K ↗
11. Subtle roles of Sb and S in regulating the thermoelectric properties of N-type PbTe to high performance10.1002/aenm.201700099 ↗
12. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
13. Strong phonon scattering by layer structured PbSnS2 in PbTe based thermoelectric materials10.1002/adma.201201565 ↗
14. Magnetism-induced huge enhancement of the room-temperature thermoelectric and cooling performance of p-type BiSbTe alloys10.1039/C9EE03446C ↗
15. Self-tuning n-type Bi2(Te,Se)3/SiC thermoelectric nanocomposites to realize high performances up to 300 °C10.1002/advs.201700259 ↗
16. BiSbTe alloy with high thermoelectric and mechanical performance for power generation10.1016/j.scriptamat.2022.114801 ↗
17. Extraordinary role of Zn in enhancing thermoelectric performance of Ga-doped n-type PbTe10.1039/D1EE02986J ↗
18. High-performance in n-type PbTe-based thermoelectric materials achieved by synergistically dynamic doping and energy filtering10.1016/j.nanoen.2021.106706 ↗
19. Multiple valence bands convergence and strong phonon scattering lead to high thermoelectric performance in p-type PbSe10.1038/s41467-022-31939-4 ↗
20. Enhanced thermoelectric performance of PbTe bulk materials with figure of merit zT > 2 by multi-functional alloying10.1016/j.jmat.2016.05.005 ↗
21. Ultrahigh average ZT realized in p-type SnSe crystalline thermoelectrics through producing extrinsic vacancies10.1021/jacs.0c01726 ↗
22. Intrinsically high thermoelectric performance in AgInSe2 n-type diamond-like compounds10.1002/advs.201700727 ↗
23. Enhanced and stabilized n-type thermoelectric performance in α-CuAgSe by Ni doping
24. High thermoelectric performance realized through manipulating layered phonon-electron decoupling10.1126/science.abn8997 ↗
25. Exceptional thermoelectric performance in Mg3Sb0.6Bi1.4 for low-grade waste heat recovery10.1039/C8EE03374A ↗
26. Low carrier concentration leads to high in-plane thermoelectric performance in n-type SnS crystals10.1007/s40843-021-1684-0 ↗
27. Blocking ion migration stabilizes the high thermoelectric performance in Cu2Se composites10.1002/adma.202003730 ↗
28. Estimation of the potential performance in p-type SnSe crystals through evaluating weighted mobility and effective mass10.1016/j.jmat.2020.06.003 ↗
29. High thermoelectric performance in low-cost SnS0.91Se0.09 crystals10.1126/science.aax5123 ↗
30. High thermoelectric performance of AgSb1-xPbxSe2 prepared by fast nonequilibrium synthesis10.1021/acsami.0c10508 ↗
31. Defect engineering for realizing p-type AgBiSe2 with a promising thermoelectric performance10.1021/acs.chemmater.0c00481 ↗
32. The crystal structure of synthetic pavonite, AgBi3S5, and the definition of the pavonite homologous series
33. Crystal growth, thermoelectric properties, and electronic structure of AgBi3S5 and AgSbxBi3-xS5 (x=0.3)10.1021/cm0502931 ↗
34. Synthesis and transport properties of AgBi3S5 ternary sulfide compound10.1016/j.intermet.2013.01.013 ↗
35. High thermoelectric performance in electron-doped AgBi3S5 with ultralow thermal conductivity10.1021/jacs.7b02399 ↗
36. Boosting thermoelectric properties of AgBi3(SeyS1-y)5 solid solution via entropy engineering10.1021/acsami.0c19387 ↗
37. Contrasting roles of small metallic elements M (M = Cu, Zn, Ni) in enhancing the thermoelectric performance of n-type PbM0.01Se10.1039/D0TA00174K ↗
38. Carriers: the less, the faster
39. Discordant Gd and electronic band flattening synergistically induce high thermoelectric performance in n-type PbTe10.1021/acsenergylett.1c00450 ↗
40. On the Lorenz number of multiband materials10.1103/PhysRevB.95.125206 ↗
41. High power factor and enhanced thermoelectric performance of SnTe-AgInTe2: synergistic effect of resonance level and valence band convergence10.1021/jacs.6b08382 ↗
42. Realizing high doping efficiency and thermoelectric performance in n-type SnSe polycrystals via bandgap engineering and vacancy compensation
43. Enhanced thermoelectric performance of p-type SnSe doped with Zn10.1016/j.scriptamat.2016.08.009 ↗
44. Rationally optimized carrier effective mass and carrier density leads to high average ZT value in n-type PbSe10.1039/D1TA07039H ↗
45. Thermoelectric SnTe with band convergence, dense dislocations, and interstitials through Sn self-compensation and Mn alloying10.1002/smll.201802615 ↗
46. Low-cost and environmentally benign selenides as promising thermoelectric materials10.1016/j.jmat.2018.07.001 ↗
47. Realizing N-type SnTe thermoelectrics with competitive performance through suppressing Sn vacancies10.1021/jacs.1c02346 ↗
48. The role of ionized impurity scattering on the thermoelectric performances of rock salt AgPbmSnSe2+m10.1002/adfm.201600623 ↗
49. Approaching topological insulating states leads to high thermoelectric performance in n-type PbTe10.1021/jacs.8b09029 ↗
50. Charge and phonon transport in PbTe-based thermoelectric materials10.1038/s41535-018-0127-y ↗
51. Charge-transport model for conducting polymers10.1038/nmat4784 ↗
52. Realizing high performance n-type PbTe by synergistically optimizing effective mass and carrier mobility and suppressing bipolar thermal conductivity10.1039/C8EE01151F ↗
53. Non-equilibrium processing leads to record high thermoelectric figure of merit in PbTe-SrTe10.1038/ncomms12167 ↗
54. Broadening temperature plateau of high zTs in PbTe doped Bi0.3Sb1.7Te3 through defect carrier regulation and multi-scale phonon scattering