Rapid, Brushless Self-assembly of a PS-b-PDMS Block Copolymer for Nanolithography
Source abstract
Abstract
Block copolymers (BCP) are highly promising self-assembling precursors for scalable nanolithography. Very regular BCP nanopatterns can be used as on-chip etch masks. The first step in the processing of BCP thin films is usually the chemical modification of the substrate surface, typically by grafting of a brush layer that renders the surface energy neutral relative to the constituent blocks. We provide here a first study on rapid, low temperature self-assembly of PS-b-PDMS (polystyrene-block-polydimethylsiloxane) on silicon substrates without a brush layer. We show that it forms line and antidot patterns after short solvo-thermal annealing. Unlike previous reports on this system, low temperature and short annealing time provide self-assembly in homogeneous thin films covering large substrate areas. This on-chip mask was then used for pattern transfer to the underlying silicon substrate. SEM (scanning electron microscope) images reveal silicon nanowires relative to the PDMS patterns of the BCP mask.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Block Copolymer Self-Assembly · Nanofabrication and Lithography Techniques · Advancements in Photolithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Fifty years of Moore's law10.1109/TSM.2010.2096437 ↗
2. Preserving Moore's law pushes lithography to its limits
3. Block copolymer lithography: feature size control and extension by an over-etch technique10.1016/j.tsf.2012.09.017 ↗
4. Sub-15nm silicon lines fabrication via PS-b-PDMS block copolymer lithography10.1155/2013/831274 ↗
5. Advances in top-down and bottom-up surface nanofabrication: techniques, applications & future prospects10.1016/j.cis.2011.11.001 ↗
6. Resists for sub-20-nm electron beam lithography with a focus on HSQ: state of the art10.1088/0957-4484/20/29/292001 ↗
7. Linking EUV lithography line edge roughness and 16nm NAND memory performance10.1016/j.mee.2012.04.013 ↗
8. Templated self-assembly of block copolymers: top-down helps bottom-up10.1002/adma.200502651 ↗
9. High aspect ratio sub-15nm silicon trenches from block copolymer templates10.1002/adma.201202361 ↗
10. Swift nanopattern formation of PS-b-PMMA and PS-b-PDMS block copolymer films using a microwave assisted technique10.1021/nn4035519 ↗
11. Directing the self-assembly of block copolymers10.1016/j.progpolymsci.2007.05.004 ↗
12. Ordered block-copolymer assembly using nanoimprint lithography10.1021/nl049209r ↗
13. Effects of a diblock copolymer on adhesion between immiscible polymers.1. PS-PMMA copolymer between PA and PMMA10.1021/ma00068a014 ↗
14. Tuning PDMS brush chemistry by UV-O3 exposure for PS-b-PDMS microphase separation and directed self-assembly10.1021/la401561k ↗
15. Adhesion of polymer interfaces reinforced with random and diblock copolymers as a function of geometry10.1021/ma970125x ↗
16. Laboratory-scale setup for anionic-polymerization under inert atmosphere10.1063/1.1146052 ↗
17. Lubricating effect of thin films of styrene–dimethylsiloxane block copolymers10.1021/la980986e ↗
18. 2007 · XX · 1076
19. Brushless and controlled microphase separation of lamellar polystyrene-b-polyethylene oxide thin films for block copolymer nanolithography10.1002/polb.23082 ↗