journal article·2025-03-31Open access

A Review of Research on the Interfacial Shear Performance of Ultra-High-Performance Concrete and Normal Concrete Composite Structures

Zhenjie Xu, Fengjiang Qin, Qiuwei Yang, Xi Peng, Bin Xu

Coatings· Volume 15· Issue 4

Abstract

The interfacial shear performance between ultra-high-performance concrete (UHPC) and normal concrete (NC) is a critical factor in determining the overall performance of composite structures. This paper systematically reviews the research progress on the interfacial shear performance of UHPC-NC, revealing the core mechanisms of bond strength (dominated by mechanical interlocking with chemical bonding as a supplementary factor). It compares the advantages and disadvantages of single-shear, Z-shaped shear, double-shear, and inclined shear tests, clarifying the influence patterns of key parameters such as interface roughness, matrix wetness, curing conditions, and fiber content. This study found that interface treatment is the most significant factor in improving shear strength. Roughening or grooving treatments can increase the strength by more than 40%~80%, while the combination of rebar planting and grooving can further enhance ductility. The matrix wetness (saturated and moist) and UHPC age (within 7 days) need to be strictly controlled to avoid differences in shrinkage stress. Prediction models based on mechanics, finite element analysis, and experimental data each have their advantages and disadvantages and should be selected based on actual working conditions. To address common issues in practical engineering, such as insufficient interface roughness, shrinkage cracking, and fatigue degradation under cyclic loading, it is recommended to adopt composite interface treatment techniques (such as roughening + rebar planting), prestressing design, and optimized fiber distribution (with a steel fiber content of 1.5%~2.5%). This paper provides the theoretical basis and practical guidance for the design optimization and construction control of UHPC reinforcement projects and composite structures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Engineering Research Center of Industrial Construction in Civil Engineering of Zhejiang, Ningbo University of Technology, Ningbo 315211, China

Key Laboratory of New Technology for Construction of Cities in Mountain Area, School of Civil Engineering, Chongqing University, Chongqing 400045, China

Ningbo Roaby Technology Industrial Group Co., Ltd., Ningbo 315800, China

Funding

National Key Research and Development Program of China · Zhejiang Provincial Natural Science Foundation of China · key projects of Yongjiang science and technology innovation 2035 in Ningbo · major science and technology project of Ningbo High-tech Zone in 2023

References (100+)

Show source-provided references
1. Flexural strength and porosity of cements10.1038/289388a0 ↗
2. Densified cement ultra-fine particle-based materials
3. Application of ultra-high performance concrete in bridge engineering
4. Optimization of ultra-high-performance concrete by the use of a packing model10.1016/0008-8846(94)90022-1 ↗
5. Production technology and development of ultra-high performance concrete (UHPC)
6. Hunan Road & Bridge Construction Group Co., Ltd. (2022). Hunan Province’s Hangrui Dongting Bridge. Bull. Chin. Ceram. Soc., 41, 2222.
7. UHPC evolution, development, and utilization in construction: A review10.1016/j.jmrt.2020.12.051 ↗
8. Application of ultra-high performance concrete in bridge engineering at home and abroad
9. Behavior of composite beams with UHPC-concrete composite slabs under negative bending moment10.1016/j.jcsr.2025.109415 ↗
10. Rehabilitation and strengthening of concrete structures using ultra-high performance fibre reinforced concrete10.2749/101686613X13627347100437 ↗
11. A Review of research on reactive powder concrete
12. Research progress of UHPC reinforcement technology in bridge engineering
13. Database evaluation of interface shear transfer in reinforced concrete members
14. Ma, W. (2023). Study on Shear Characteristics of UHPC-NC Interface. [Master’s Thesis, Lanzhou Jiaotong University].
15. Review of factors affecting bond strength between ultra-high-performance concrete and normal strength substrate10.1016/j.conbuildmat.2024.137416 ↗
16. Steel fiber–matrix interfacial bond in ultra-high performance concrete: A review10.1016/j.eng.2021.11.019 ↗
17. Bonding properties and mechanism of the interface between precast UHPC and post-cast UHPC10.1016/j.istruc.2022.07.016 ↗
18. Bijen, J., and Salet, T. (1993, January 1–2). Adherence of young concrete to old concrete development of tools for engineering. Proceedings of the 2nd Bolomey Workshop on Adherence of Young on Old Concrete, Unterengstringen, Switzerland.
19. Fiebrich, M.H. (1993, January 1–2). H. Scientific Aspects of adhesion phenomena in the interface mineral substratepolymers. Proceedings of the Adherence of Young on Old Concrete, Unterengstringen, Switzerland.
20. Mechanism of Bond force formation at the interface between new and old concrete
21. Creep Shear stress analysis at the interface of prestressed UHPC-NC composite beams
22. Experimental Study on the flexural performance of precast UHPC-NC composite wet joints
23. Shear Bond performance of the interface between precast keyway UHPC and post-cast concrete
24. Research on the durability of reactive powder concrete in marine corrosive environment10.1201/b13165-24 ↗
25. Experimental study of the material and bond properties of frost-damaged concrete10.1016/j.cemconres.2010.11.007 ↗
26. Interface bonding characteristics of 3D printed ultra-high performance concrete after elevated temperatures10.1016/j.jobe.2024.109801 ↗
27. Chen, Y., Xie, J., Kang, E., and Tong, C. (2023, January 14). Shear Performance of interface between normal concrete and ultra-high performance concrete in cryogenic circumstance. Proceedings of the 17th East Asian-Pacific Conference on Structural Engineering and Construction, 2022: EASEC-17, Singapore.10.1007/978-981-19-7331-4_41 ↗
28. Pan, J. (2023). Analysis of interfacial bond-shear performance between UHPC and ordinary concrete. Fujian Commun. Sci. Technol., 50–54.
29. Influence of interfacial characteristics on the shear bond behaviour between concrete and ferrocement10.1016/j.conbuildmat.2018.05.084 ↗
30. Research progress on the bonding performance of UHPC-NC interfaces
31. American Association of State Highway and Transportation Officials (AASHTO) (2020). AASHTO LRFD Bridge Design Specifications, AASHTO. [9th ed.].
32. The integration path of ideological and political education in civil engineering curriculum: Taking the Principles of Concrete Structure Design as an Example
33. Experimental study on single-side shear behavior of CFRP sheet-engineered cement-based composites-concrete composite interface
34. (2019). ACI Committee 318. Building Code Requirements for Structural Concrete (ACI 318-19) and Commentary (ACI 318R-14) (Standard No. ACI 318-19).
35. Shear transfer in reinforced concrete
36. Experimental study on shear performance of new-to-old interface in high-strength concrete
37. Introduction to the “technical specification for application of fiber reinforced concrete” JGJ/T 221-2010
38. Bi-surface shear test for evaluating bond between existing and new concrete
39. Shear connection of reinforcement stiffened cold-formed U-shaped steel and concrete composite beam10.1016/j.engstruct.2020.110862 ↗
40. (2005). Standard Test Method for Bond Strength of Epoxy-Resin Systems Used with Concrete by Slant Shear (Standard No. ASTM C882).
41. Enhancement of the concrete-PCM interfacial bonding strength using silica fume10.1016/j.conbuildmat.2020.119774 ↗
42. Experimental study on oblique-shear performance of splicing joint for precast ultrahigh-performance concrete segmental bridges
43. Single-side shear bond strength and OTZ microstructure of UHPC repair materials with concrete substrate10.1061/(ASCE)MT.1943-5533.0004360 ↗
44. Shear Behaviour of the UHPC-NSC Interface with Castellated Keys: Effects of Castellated Key Dimension and Dowel Rebar10.1016/j.istruc.2021.01.088 ↗
45. Effect of surface preparation and curing condition on the interfacial bond strength between ultra high performance concrete and normal strength concrete
46. Precast/Prestressed Concrete Institute (2010). PCI Design Handbook: Precast and Prestressed Concrete, Precast/Prestressed Concrete Institute. [7th ed.].
47. Experimental study on seismic performance of reinforced concrete columns with Z-shaped cross-section under bidirectional shear
48. Experimental study on shear performance of plain construction joints integrated with ultra-high performance concrete (UHPC)10.1016/j.conbuildmat.2017.06.156 ↗
49. Investigations on interface shear-stress transfer behavior of concrete composite slabs with lattice girders10.1007/s12205-024-2165-2 ↗
50. Experimental and analytical study on interfacial shear resistance of prefabricated ultra-high performance concrete-post-cast normal concrete interface10.1177/13694332231196510 ↗
51. Mesoscopic shear behavior and strength characteristic of UHPC-NC interface considering the combined effect of mechanical interlocking and dowel action10.1016/j.engfracmech.2024.110306 ↗
52. Study on shear performance of UHPC-NC interface with keyway
53. Direct shear behavior of castellated dry RPC joints in precast concrete segmental bridges10.1016/j.istruc.2021.07.013 ↗
54. Direct shear test study on old and new concrete10.1016/j.jobe.2023.108391 ↗
55. Yu, K., Zhang, Z., Zou, Y., Jiang, J., Zeng, X., and Tang, L. (2022). Interfacial shear performance of epoxy adhesive joints of prefabricated elements made of ultra-high-performance concrete. Polymers, 14.10.3390/polym14071364 ↗
56. Experimental study and finite element simulation on direct shear test of the interface between UHPC and NC with embedded steel bars
57. Experimental study on shear strength of interface between ultra-high toughness cementitious composite and reactive powder concrete
58. Wang, X.W. (2016). Research on the Interfacil Shear Behavior of UHPC and Reinforced Concrete. [Master’s Thesis, Hunan University].
59. Investigation of over-nonlocal damage and interface cohesive models for simulating structural behaviors of composite UHPC-NC members10.1016/j.istruc.2020.10.042 ↗
60. Experimental study on shear performance of ultra-high performance concrete-ordinary concrete interface
61. Experimental and analytical study on anti-slip performance of interface in composite beam bridge with ultra-high performance concrete and ordinary concrete
62. An experimental study: Various influence factors affecting interfacial shear performance of UHPC-NSC10.1016/j.conbuildmat.2019.117480 ↗
63. Experimental and numerical study on shear behavior of shear pockets between ultra-high-performance and normal concrete for precast girder bridges10.1016/j.istruc.2023.06.080 ↗
64. Wen, X., Gong, W., Zhou, M., Yin, G., and Deng, Z. (2024). Influence of shear stud structural measures on the bond performance of UHPC formwork-cast-in-situ NC interface. Acta Mater. Compos. Sin., 1–16.
65. Study on shear bond performance between post-cast ordinary concrete and precast UHPC
66. Flexural performance of U-shaped high-strength ECC permanent formwork-concrete composite beams10.1016/j.istruc.2025.108641 ↗
67. Experimental study on shear performance of perfobond steel plate in ultra-high performance concrete (UHPC)-normal concrete (NC) connection10.1016/j.istruc.2024.106783 ↗
68. Shear properties of the interface between ultra-high performance concrete and normal strength concrete10.1016/j.conbuildmat.2020.118455 ↗
69. Zhao, Y.C., Lei, H.G., Guo, L.K., and Lu, G.Y. (2023). Experimental investigation on interface performance of UHPC-strengthened NC structure through push-out tests. Materials, 16.10.3390/ma16051766 ↗
70. Research progress on properties of ultra-high performance concrete and its application in prefabricated buildings
71. Bond performance between ultrahigh-performance concrete and normal-strength concrete10.1061/(ASCE)MT.1943-5533.0000890 ↗
72. Interface shear failure behavior between normal concrete (NC) and ultra-high performance concrete (UHPC)10.1186/s40069-023-00657-6 ↗
73. Influence of interfacial parameters and testing methods on UHPC–NSC bond strength: Slant shear vs. direct tensile testing10.1016/j.cemconcomp.2022.104568 ↗
74. Interfacial bond properties between normal strength concrete substrate and ultra-high performance concrete as a repair material10.1016/j.conbuildmat.2019.117431 ↗
75. Shear bond testing of concrete repairs10.1016/S0008-8846(99)00088-5 ↗
76. Interfacial bond behavior between ultra high performance concrete and normal concrete substrates10.1016/j.conbuildmat.2021.126229 ↗
77. Zhang, D., Ma, X., Shen, H., Guo, S., and Liu, C. (2023). Analysis of structural parameters of steel–NC–UHPC composite beams. Materials, 16.10.3390/ma16165586 ↗
78. Experimental investigation on shear strength between ultra-high-performance concrete and normal concrete substrates
79. Quantifying bonding characteristics between UHPC and normal-strength concrete for bridge deck application10.1061/(ASCE)BE.1943-5592.0001404 ↗
80. Study on the influence of roughness and coarse aggregate area on UHPC-NC interface bonding performance10.1617/s11527-024-02507-7 ↗
81. Experimental study on bond performance of steam-free ultra-high performance concrete and existing concrete interface
82. Tian, J., Jiang, X., Yang, X., Ma, M., and Li, L. (2024). Shear performance and calculation method of shear strength for UHPC-NC interface with grooves. J. Build. Mater., 1–14. Available online: https://link.cnki.net/urlid/31.1764.TU.20240810.1105.010.
83. Experimental study of interfacial adhesion performance of prefabricated UHPC-NC diagonal shear groove
84. Yang, J., Xia, J., Cheng, C., Wang, J., Zhang, J., and Wang, G. (2022). Research on the bonding performance of UHPC–NC interfaces with different sizes of grooves. Front. Mater., 9.10.3389/fmats.2022.859717 ↗
85. Effects of interface roughness and interface adhesion on new-to-old concrete bonding10.1016/j.conbuildmat.2017.05.049 ↗
86. Study on the mechanism of mechanical property enhancement of steam-cured ultra-high performance concrete (UHPC) with Nano C-S-H/PCE
87. Comparative studies of the effect of ultrahigh-performance concrete and normal concrete as repair materials on interfacial bond properties and microstructure10.1016/j.engstruct.2020.111122 ↗
88. An, N. (2018). Study on the Influence of UHPC-NC Interface Characteristics on Bond Performance. [Ph.D. Thesis, Beijing Jiaotong University].
89. Simulation of surface preparations to predict the bond behaviour between normal strength concrete and ultra-high performance concrete10.1016/j.conbuildmat.2020.118871 ↗
90. Experimental study on bond performance of UHPC-to-NC interfaces: Constitutive model and size effect10.1016/j.engstruct.2024.118681 ↗
91. Shear performance of interface between ultra-high performance concrete and normal concrete treated with ribs10.1016/j.istruc.2024.105867 ↗
92. Influence of fibres and hardening accelerator on concrete for rigid pavements10.1680/jmacr.22.00181 ↗
93. Shear and tensile bonding performance of prefabricated UHPC and cast-in-place NC interface in composite girder bridges10.1016/j.conbuildmat.2025.139952 ↗
94. Influence of substrate moisture state and roughness on interface microstructure and bond strength: Slant shear vs. pull-off testing10.1016/j.cemconcomp.2017.12.005 ↗
95. Luković, M., Šavija, B., Schlangen, E., Ye, G., and Breugel, K.V. (2016). A 3D lattice modelling study of drying shrinkage damage in concrete repair systems. Materials, 9.10.3390/ma9070575 ↗
96. Effects of fillers on the properties of cement grouts10.1016/j.conbuildmat.2020.118346 ↗
97. Experimental study and theoretical prediction on shrinkage-induced restrained stresses in UHPC-RC composites under normal curing and steam curing10.1016/j.cemconcomp.2020.103602 ↗
98. Grout-concrete interface bond performance: Effect of interface moisture on the tensile bond strength and grout microstructure10.1016/j.conbuildmat.2018.03.076 ↗
99. Interfacial cohesion model of ultra-high performance concrete wet joints under the influence of multiple factors10.1002/suco.202300909 ↗
100. Wu, Y., Zhang, Y., Liu, Y., Wang, W., and Qiu, J. (2023). Experimental study and numerical analysis on shear performance of interface between precast UHPC and cast-in-situ NC. Railw. Eng., 1–6. Available online: https://link.cnki.net/urlid/11.2027.U.20230908.1550.002.