Research on Laser Cladding Inconel 625 Coating Process for TRT Blades
Source abstract
Abstract
In this study, Inconel 625 coatings were deposited onto the surface of 2Cr13 stainless steel via laser cladding technology to ensure their corrosion resistance and mechanical properties. The microstructure and characteristics of coatings were adjusted by varying laser power (1200, 1500, and 1800 W), scanning speed (10, 15, and 25 mm/s), and overlap rate (40%, 50%, and 70%). The results showed that the impact resistance of blades was improved by 23% to 30% compared to the substrate, whereas the self-corrosion current density was reduced by 94%–98%, which indicated the outstanding resistance of specimens to damage and corrosion. At the same time, the appropriate processing parameters enabled the surface hardness of the 2Cr13 substrate to be improved. This study provides practical technical guidance for the repair of 2Cr13 blades and a comprehensive enhancement of their corrosion resistance and mechanical properties through parameter optimization.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Xi’an Shiyou University, Xi’an 710065, China
References (29)
Show source-provided references
1. Microstructure and tribological characteristics of nitrided layer on 2Cr13 steel in air and vacuum10.1016/j.surfcoat.2009.09.015 ↗
2. Effect of vacuum re-melting on the solid particles erosion behavior of Ni60-NiCrMoY composite coatings prepared by plasma spraying10.1016/j.vacuum.2016.09.020 ↗
3. Electrochemical short crack effect in environmentally assisted cracking of a steam turbine blade steel10.1016/j.corsci.2012.01.004 ↗
4. Experimental investigation of failure behavior of the cracked 17-4PH steel blades in a top gas energy recovery turbine10.1016/j.engfailanal.2019.07.009 ↗
5. Investigation on the microstructure, tribological performance and corrosion resistance of Ni–Mo coatings deposited by HVOF and APS methods10.1016/j.vacuum.2022.111023 ↗
6. Erosion- and corrosion-resistant coatings for aircraft compressor blades10.1016/0257-8972(93)90288-Y ↗
7. Corrosive wear of multi-layer Fe-based coatings laser cladded from amorphous powders10.1016/j.wear.2019.203113 ↗
8. Interfacial structure and pore formation mechanism during laser cladding of pure vanadium on Ti-6Al-4V alloy10.1016/j.ijrmhm.2021.105671 ↗
9. Corrosion reduction in steam turbine blades using nano-composite coating10.1016/j.jksus.2023.102861 ↗
10. Corrosion of Ni-based alloy coatings prepared by laser cladding in high-temperature chloride environment10.1016/j.surfcoat.2024.130823 ↗
11. Optimization of defects and high temperature corrosion resistance of laser cladding FeCrAl coatings: Influence of process parameters10.1016/j.optlastec.2024.111640 ↗
12. Modeling of process parameters and wear performance investigation of Inconel 625 nickel-based coatings via laser cladding10.1016/j.optlastec.2024.111749 ↗
13. Effect of Nb content on microstructure and corrosion resistance of Inconel 625 coating formed by laser cladding10.1016/j.surfcoat.2023.129311 ↗
14. Corrosion behavior and mechanism of Inconel 625 coatings in high-temperature acidic environments for waste incineration applications10.1016/j.surfcoat.2024.131291 ↗
15. Corrosion resistance of NbCrFeNiCoMoX coating applied by laser cladding on GTD-111 superalloy: Application of gas turbine blade10.1016/j.mtcomm.2024.108157 ↗
16. Corrosion resistance of VC-reinforced Fe-based SMA coatings by laser cladding10.1016/j.surfcoat.2024.130457 ↗
17. Improved wear and corrosion resistance of laser-clad (Fe0.25Co0.25Ni0.25Cr0.125Mo0.125)86B14 coating through annealing treatment10.1016/j.surfcoat.2023.129973 ↗
18. Laser cladding of Fe-based corrosion and wear-resistant alloy: Genetic design, microstructure, and properties10.1016/j.surfcoat.2022.128117 ↗
19. Effect of oscillating laser cladding on microstructure and properties of stainless steel cladding layers10.1016/j.mtcomm.2024.110254 ↗
20. (2007). Stainless Steel Bars. Standard No. GB/T 1220-2007. Available online: https://openstd.samr.gov.cn/bzgk/gb/newGbInfo?hcno=7C88197FD1C028E60E96B808D5D83FAC.
21. (2020). Metal Materials-Charpy Pendulum Impact Test Method. Standard No. GB/T229-2020. Available online: https://ebook.chinabuilding.com.cn/zbooklib/bookpdf/probation?SiteID=1&bookID=134020.
22. Improved high-temperature hardness and wear resistance of Inconel 625 coatings fabricated by laser cladding10.1016/j.jmatprotec.2016.12.001 ↗
23. Mitigation of pores generation at overlapping zone during laser cladding10.1016/j.jmatprotec.2014.09.025 ↗
24. Identifying defects and problems in laser cladding and suggestions of some remedies for the same10.1016/j.matpr.2018.02.297 ↗
25. Microstructural characterization and corrosion analysis of HA/TiO2 and HA/ZrO2 composite coating on Ti-alloy by laser cladding10.1016/j.apsadv.2024.100655 ↗
26. Effect of WC content on hardness and fracture toughness of WC-Ni60A wear-resistant coatings10.1016/j.surfcoat.2024.131133 ↗
27. Formation Quality Optimization and Corrosion Performance of Inconel 625 Weld Overlay Using Hot Wire Pulsed TIG10.1016/S1875-5372(17)30006-1 ↗
28. Effect of Laser Power on Laser Cladding Structure and Hardness of 17-4PH Wire
29. Study on the thermal behavior and microstructure of Fe-based deposited layers prepared by laser cladding on Al substrate10.1016/j.optlastec.2024.111365 ↗