journal article·2023-09-25Open access

Effect of Pore Evolution on Thermal Diffusivity and Radiation Characteristics of Thermal Barrier Coatings after High-Temperature Exposures

Zhou Xu, Shuheng Xu, Qiukun Zhang, Jianfei Xu, Dongdong Ye

Coatings· Volume 13· Issue 10

Abstract

Studying the impact of pores is crucial to enhancing the service performance of coatings, since they are a typical microstructure feature of thermal barrier coatings. In this paper, a coating prepared by the APS method was employed as the study object, and a scanning electron microscope and optical microscope were used to calculate the porosity after spraying or high-temperature exposures. Based on this, numerical calculations and simulations were used to evaluate the impacts of the pore structure and porosity on the heat conductivity and radiation characteristics of the coating. The results showed that, at high-temperature exposures, the horizontal pores inhibited thermal conductivity and radiation, but the column pores increased heat conductivity and radiation. The heat conductivity of the coating linearly decreased as the porosity increased, whereas the extinction coefficient increased, although at a slower and slower pace. When the porosity reached 15%, if the porosity was further increased, the thermal radiation energy did not change much, indicating that increasing the porosity would only block the heat radiation to a certain amount. This new and time-saving technique for materials research utilizing simulation and numerical computing may be utilized to optimize the microstructure of coatings to increase their service performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Electrical and Automation, Wuhu Institute of Technology, Wuhu 241006, China

Fujian Provincial Key Laboratory of Terahertz Functional Devices and Intelligent Sensing, School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China

School of Artificial Intelligence, Anhui Polytechnic University, Wuhu 241000, China

School of Mechanical Engineering, Anhui Polytechnic University, Wuhu 241000, China

Department of Automotive Engineering and Intelligent Manufacturing, Wanjiang College of Anhui Normal University, Wuhu 241008, China

Anhui Key Laboratory of Detection Technology and Energy Saving Devices, Anhui Polytechnic University, Wuhu 241000, China

Funding

National Natural Science Foundation of China · Science and Technology Plan Project of Wuhu City · Natural Science Research Project of the Wuhu Institute of Technology · Key Research and Development Projects in Anhui Province · Open Research Fund of the Fujian Provincial Key Laboratory of Terahertz Functional Devices and Intelligent Sensing, Fuzhou University · 2023 Anhui Province Scientific Research Preparation Plan Project · Open Research Fund of the Anhui Key Laboratory of Detection Technology and Energy Saving Devices · Anhui Institute of Future Technology Enterprise Cooperation Project · Scientific Research Project of Wanjiang College, Anhui Normal University

References (30)

Show source-provided references
1. Wang, T., Xuan, Y., and Han, X. (2023). Investigation on hybrid thermal features of aero-engines from combustor to turbine. Int. J. Heat Mass Transf., 200.10.1016/j.ijheatmasstransfer.2022.123559 ↗
2. An overview of the machinability of aeroengine alloys10.1016/S0924-0136(02)01042-7 ↗
3. Liu, Y., Xu, G., Fu, Y., Wen, J., and Huang, H. (2023). Thermal dynamic and failure research on an air-fuel heat exchanger for aero-engine cooling. Case Stud. Therm. Eng., 42.10.1016/j.csite.2023.102715 ↗
4. A perspective on thermally sprayed thermal barrier coatings: Current status and trends10.1007/s11666-022-01330-2 ↗
5. Heat transfer and temperature analysis of an aeroengine strut under icing conditions10.2514/1.C032107 ↗
6. Optimization of cooling structures in gas turbines: A review10.1016/j.cja.2021.08.029 ↗
7. A review of cooling technologies for high temperature rotating components in gas turbine10.1016/j.jppr.2022.07.001 ↗
8. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
9. Thermal Barrier Coatings for Gas-Turbine Engine Applications10.1126/science.1068609 ↗
10. Thermal barrier coatings: Review10.1016/j.matpr.2021.11.170 ↗
11. Tano, I., Nylen, P., Wigren, J., Gupta, M.K., and Curry, N. (2010). Thermal Spray 2010: Global Solutions for Future Applications, Springer.
12. Fang, H., Wang, W., and Yang, Z. (2021). Phase stability, thermal shock behavior and CMAS corrosion resistance of Yb2O3-Y2O3 co-stabilized zirconia thermal barrier coatings prepared by atmospheric plasma spraying. Surf. Coat. Technol., 427.10.1016/j.surfcoat.2021.127864 ↗
13. Ye, D., Xu, Z., and Pan, J. (2021). Prediction and Analysis of the Grit Blasting Process on the Corrosion Resistance of Thermal Spray Coatings Using a Hybrid Artificial Neural Network. Coatings, 11.10.3390/coatings11111274 ↗
14. Quantitative determination of porosity in thermal barrier coatings using terahertz reflectance spectrum: Case study of atmospheric-plasma-sprayed YSZ coatings10.1109/TTHZ.2020.2995821 ↗
15. In-situ evaluation of porosity in thermal barrier coatings based on the broadening of terahertz time-domain pulses: Simulation and experimental investigations10.1364/OE.27.028150 ↗
16. Li, R., Ye, D., and Xu, Z. (2022). Nondestructive evaluation of thermal barrier coatings thickness using terahertz Time-Domain spectroscopy combined with hybrid machine learning approaches. Coatings, 12.10.3390/coatings12121875 ↗
17. Microstructure-thermal conductivity relationships for plasma-sprayed yttria-stabilized zirconia coatings10.1111/j.1551-2916.2008.02476.x ↗
18. An analytical model for simulation of heat flow in plasma-sprayed thermal barrier coatings10.1361/10599630523764 ↗
19. Influence of pores on the thermal insulation behavior of thermal barrier coatings prepared by atmospheric plasma spray10.1016/j.matdes.2010.06.040 ↗
20. Modelling of thermal conductivity of porous materials: Application to thick thermal barrier coatings10.1016/j.jeurceramsoc.2003.09.012 ↗
21. Microstructural characterization of porous thermal barrier coatings by laser flash technique10.1016/j.actamat.2009.03.041 ↗
22. Wang, M., Wang, J., Pan, N., and Chen, S. (2007). Mesoscopic predictions of the effective thermal conductivity for microscale random porous media. Phys. Rev. E, 75.10.1103/PhysRevE.75.036702 ↗
23. Lattice Boltzmann method applied to variable thermal conductivity conduction and radiation problems10.2514/1.20557 ↗
24. Numerical solution of initial boundary value problems involving Maxwell’s equations in isotropic media10.1109/TAP.1966.1138693 ↗
25. Sullivan, D.M. (2013). Electromagnetic Simulation Using the FDTD Method, John Wiley & Sons.10.1002/9781118646700 ↗
26. Infrared-optical properties and heat transfer coefficients of semitransparent thermal barrier coatings10.1016/j.surfcoat.2008.09.033 ↗
27. Microstructure Evolution and Interface Stability of Thermal Barrier Coatings with Vertical Type Cracks in Cyclic Thermal Exposure10.1007/s11666-013-9886-y ↗
28. Thermal Conductivity in Suspension Sprayed Thermal Barrier Coatings: Modeling and Experiments10.1007/s11666-016-0503-8 ↗
29. Modeling the thermal radiation properties of thermal barrier coatings based on a random generation algorithm10.1016/j.ceramint.2016.03.067 ↗
30. Microstructural effect on the radiative properties of YSZ thermal barrier coatings (TBCs)10.1016/j.ijheatmasstransfer.2014.01.063 ↗