Efficiency of Application of (Mo, Al)N-Based Coatings with Inclusion of Ti, Zr or Cr during the Turning of Steel of Nickel-Based Alloy
Source abstract
Abstract
The article compares the properties of multilayer composite wear-resistant coatings of Zr–ZrN–(Zr, Mo, Al)N, Ti–TiN–(Ti, Mo, Al)N, and Cr–CrN–(Cr, Mo, Al)N. The investigation was focused on hardness, resistance to fracture during scratch tests, elemental composition, and structure of the coatings. Experiments were carried out to study the wear resistance of coated carbide tools during the turning of 1045 steel and of NiCr20TiAl heat-resistant nickel alloy. With the elemental compositions identical in the content of molybdenum (Mo) and aluminium (Al), identical thicknesses and nanolayer periods of λ, the coatings being studied demonstrated a noticeable difference in wear resistance. Both during the turning of steel and nickel-based alloy, the highest wear resistance was detected for tools with the Zr–ZrN–(Zr, Mo, Al)N coating (the tool life was 3–5 times higher than for uncoated tools). The good wear resistance of the Zr–ZrN–(Zr, Mo, Al)N coating may be related to the optimal combination of hardness and plasticity and the active formation of molybdenum oxide (MoO3) on the coating surface during the cutting, with good tribological and protective properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Design and Technological Informatics of the Russian Academy of Sciences (IDTI RAS), 127055 Moscow, Russia
Materials Science and Metallurgy Shared Use Research and Development Center, National University of Science and Technology MISiS, 119049 Moscow, Russia
State Scientific Centre Keldysh Research Center, 125438 Moscow, Russia
Funding
Ministry of Science and Higher Education of the Russian Federation
References (70)
Show source-provided references
1. Salomon, C.J. (1931). Process for Machining Metals of Similar Acting Materials When Being Worked by Cutting Tools. (Nr. 523594), German Patent.
2. Boothroyd, G., and Knight, W.A. (2006). Fundamentals of Machining and Machine Tools, CRC Press.
3. The role of the thermal factor in the wear mechanism of ceramic tools: Part 1. Macrolevel10.3103/S1068366614060099 ↗
4. Of the theory of diffusion wear10.1016/S0007-8506(07)60898-1 ↗
5. Nature of brittle failure of cutting tool
6. Investigation of wear and diffusion processes on rake faces of carbide inserts with Ti-TiN-(Ti,Al,Si)N composite nanostructured coating10.1016/j.wear.2018.10.004 ↗
7. Cutting with coated tools: Coating technologies, characterization methods and performance optimization10.1016/j.cirp.2012.05.006 ↗
8. Advanced characterization methods for wear resistant hard coatings: A review on recent progress10.1016/j.surfcoat.2015.11.016 ↗
9. Effect of graphene addition on the mechanical and electrical properties of Al2O3–SiCw ceramics10.1016/j.jeurceramsoc.2017.01.027 ↗
10. Control of macrostress s in reactively sputtered Mo−Al−N films by total gas pressure10.1016/j.vacuum.2005.10.003 ↗
11. Microstructure, oxidation resistance, mechanical and tribological properties of Mo–Al–N films by reactive magnetron sputtering10.1016/j.vacuum.2013.11.013 ↗
12. Computational and experimental studies on structure and mechanical properties of Mo-Al-N10.1016/j.actamat.2016.01.063 ↗
13. Characterization of Mo–Al–N nanocrystalline films synthesized by reactive magnetron sputtering10.1016/j.materresbull.2008.03.029 ↗
14. TiAlN based wear resistant coatings modified by molybdenum addition10.1016/j.vacuum.2015.08.027 ↗
15. Effect of bilayer period on structural and mechanical properties of nanocomposite TiAlN/MoN multilayer films synthesized by cathodic arc ion-plating10.1016/j.surfcoat.2015.10.018 ↗
16. (Cr,Al)N and (Cr,Al,Mo)N hard coatings for tribological applications under minimum quantity lubrication10.1016/j.triboint.2019.06.010 ↗
17. Deposition and characterisation of Mo2N/CrN multilayer coatings prepared by cathodic arc evaporation10.1016/j.surfcoat.2015.08.042 ↗
18. Crystal structure and tribological properties of Zr-Al-Mo-N composite films deposited by magnetron sputtering10.1016/j.matchemphys.2019.03.071 ↗
19. Wear behaviour of wear-resistant adaptive nano-multilayered Ti–Al–Mo–N coatings10.1016/j.apsusc.2016.06.102 ↗
20. Influence of Mo on the structure and the tribomechanical properties of arc evaporated Ti–Al–N10.1016/j.surfcoat.2017.01.001 ↗
21. Glow discharge with electrostatic confinement of electrons in a chamber bombarded by fast electrons10.1134/S1063780X11050072 ↗
22. Effect of Mo content on the structure and mechanical properties of TiAlMoN films deposited on WC–Co cemented carbide substrate by magnetron sputtering10.1016/j.ijrmhm.2015.04.016 ↗
23. Effect of Mo on the thermal stability, oxidation resistance, and tribo-mechanical properties of arc evaporated Ti–Al–N coatings10.1116/1.5009743 ↗
24. Comparison in mechanical and tribological properties of Cr–W–N and Cr–Mo–N multilayer films deposited by DC reactive magnetron sputtering10.1016/j.surfcoat.2007.09.006 ↗
25. Arc PVD (Cr,Al,Mo)N and (Cr,Al,Cu)N coatings for mobility applications10.1016/j.surfcoat.2019.125046 ↗
26. Broad beam source of fast atoms produced as a result of charge exchange collisions of ions accelerated between two plasmas10.1134/S002044120904023X ↗
27. Effect of bilayer number on mechanical and wear behaviours of the AlCrN/AlCrMoN coatings by AIP method10.1080/02670844.2020.1809940 ↗
28. Ab initio-guided development of super-hard Mo–Al–Cr–N coatings10.1016/j.scriptamat.2017.06.052 ↗
29. Source of metal atoms and fast gas molecules for coating deposition on complex shaped dielectric products10.1016/j.surfcoat.2013.03.013 ↗
30. Investigation of the properties of the Cr,Mo–(Cr,Mo,Zr,Nb)N–(Cr,Mo,Zr,Nb,Al)N multilayer composite multicomponent coating with nanostructured wear-resistant layer10.1016/j.wear.2020.203597 ↗
31. Investigation of multicomponent nanolayer coatings based on nitrides of Cr, Mo, Zr, Nb, and Al10.1016/j.surfcoat.2020.126258 ↗
32. Investigation of tribological and functional properties of Cr,Mo-(Cr,Mo)N-(Cr,Mo,Al)N multilayer composite coating10.1016/j.triboint.2020.106804 ↗
33. Nano-scale multi-layered coatings for improved efficiency of ceramic cutting tools10.1007/s00170-016-9353-2 ↗
34. Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods10.1007/s00170-016-9676-z ↗
35. Nano-scale multilayered-composite coatings for the cutting tools10.1007/s00170-014-5673-2 ↗
36. Cutting tools nitriding in plasma produced by a fast neutral molecule beam10.1143/JJAP.50.08JG04 ↗
37. Plasma- and beam-assisted deposition methods10.1007/1-4020-2222-0_14 ↗
38. Effect of high-voltage pulses on the structure and properties of titanium nitride vacuum-arc coatings10.1007/s11041-012-9481-8 ↗
39. Physical characteristics, structure and stress state of vacuum-arc TiN coating, deposition on the substrate when applying high-voltage pulse during the deposition
40. Pulsed laser deposition of composite Mo–Se–Ni–C coatings using standard and shadow mask configuration10.1016/j.surfcoat.2012.06.004 ↗
41. Study of wear mechanism of hard-alloy tools during machining of refractory alloys10.3103/S1068366613030021 ↗
42. Investigation of wear dynamics for cutting tools with multilayer composite nanostructured coatings in turning constructional steel10.1016/j.wear.2018.12.033 ↗
43. Control of structure and properties of nanostructured multilayer composite coatings applied to cutting tools as a way to improve efficiency of technological cutting operations10.4028/www.scientific.net/JNanoR.37.51 ↗
44. Improvement of working efficiency of cutting tools by modifying its surface properties by application of wear-resistant complexes
45. ISO 1832:2012 (2012). Indexable Inserts for Cutting Tools—Designation, International Organization for Standardization (ISO). Available online: https://www.iso.org/standard/60123.html.
46. ASTM C1624-05(2015) (2010). Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing, ASTM International.
47. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation10.1557/JMR.1992.1564 ↗
48. ISO 513:2012 (2012). Classification and Application of Hard Cutting Materials for Metal Removal with Defined Cutting Edges—Designation of the Main Groups and Groups of Application, International Organization for Standardization. Available online: https://www.iso.org/standard/59932.html.
49. Delamination and longitudinal cracking in multi-layered composite nano-structured coatings and their influence on cutting tool life10.1016/j.wear.2017.07.021 ↗
50. Chip flow and notch wear mechanisms during the machining of high austenitic stainless steels10.1016/S0007-8506(07)62174-X ↗
51. Investigation on notch wear mechanism in finish turning pure iron material with uncoated carbide tools under different cooling/lubrication conditions10.1007/s00170-015-8171-2 ↗
52. The effects of grain size and feed rate on notch wear and burr formation in wrought Alloy 71810.1007/s00170-012-4584-3 ↗
53. Notch wear prediction model in turning of Inconel 718 with ceramic tools considering the influence of work hardened layer10.1016/j.wear.2014.02.007 ↗
54. Ceramic materials wear mechanisms when cutting nickel-based alloys
55. Notch wear detection in cutting tools using gradient approach and polynomial fitting10.1007/s00170-008-1437-1 ↗
56. Flank wear of multi-layer coated tool10.1016/j.wear.2011.01.030 ↗
57. Experimental and theoretical investigations on low temperature EPR of Cu2+ centers in TiO2 rutile single crystal10.1016/j.jallcom.2017.03.330 ↗
58. Development and research of environmentally friendly dry technological machining system with compensation of physical function of cutting fluids10.1016/j.procir.2013.05.053 ↗
59. Nano-scale multilayered composite coatings for cutting tools operating under heavy cutting conditions10.1016/j.procir.2014.03.070 ↗
60. Structure and high temperature oxidation of Zr(1−x)Mo(x)N thin films deposited by reactive magnetron sputtering10.1016/j.apsusc.2019.04.238 ↗
61. Oxidation of TiZrAlN nanocomposite thin films in air at temperatures between 500 and 700 °C10.1016/j.tsf.2009.03.044 ↗
62. Thermal stability and oxidation behavior of quaternary TiZ–rAlN magnetron sputtered thin films: Influence of the pristine microstructure10.1016/j.surfcoat.2013.07.055 ↗
63. Study on finish-turning of NiCr20TiAl nickel-based alloy using Al2O3/TiN-coated carbide tools10.1007/s00170-010-2823-z ↗
64. Study on surface damages caused by turning NiCr20TiAl nickel-based alloy10.1016/j.jmatprotec.2009.06.017 ↗
65. Long-time thermal structural stability study on NiCr20TiAl alloy
66. Normal spectral emissivity of the industrially used alloys NiCr20TiAl, inconel 718, X2CrNiMo18-14-3, and another austenitic steel at 684.5 nm10.1007/s10765-009-0604-4 ↗
67. Influence of nanolayer thickness on the performance properties of multilayer composite nano-structured modified coatings for metal-cutting tools10.1007/s00170-017-1325-7 ↗
68. Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools10.1016/j.surfcoat.2020.125402 ↗
69. Comparative study of surface integrity aspects of Incoloy 825 during machining with uncoated and CVD multilayer coated inserts10.1016/j.apsusc.2014.09.129 ↗
70. State-of-the-art in surface integrity in machining of nickel-based super alloys10.1016/j.ijmachtools.2015.10.001 ↗