Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure
Source abstract
Abstract
Electrochemical noise (EN) is expected to be an in-situ evaluation method for coating performance in the real deep-ocean environment. The asymmetric factors of working electrodes (WEs) in EN configuration, including coating area, coating thickness, and coating impedance, were considered under marine alternating hydrostatic pressure (AHP) condition. The effect of WE asymmetry was discussed mainly by EN time records, wavelet analysis and shot noise method. The results indicated that coating impedance is the most important factor, and the coating with higher impedance contributes more to current noise in a pair of electrodes. The reason of asymmetry influence on EN measurements is mainly by the variation of average charge of current sources but not the current source frequency during the initial period of coating failure process. When the obvious corrosion of metal substrate happens, the corresponding EN proportion relationship between coating/metal WEs may be not exist.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Underwater Acoustics Research · Ocean Acidification Effects and Responses · Structural Integrity and Reliability Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shenyang National Laboratory for Materials Science, Northeastern University, Wenhua Road 3-11, Shenyang 110819, China
Institute of Metal Research, Chinese Academy of Sciences, Wencui Road 62, Shenyang 110016, China
Funding
National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities · China Postdoctoral Science Foundation
References (30)
Show source-provided references
1. Effect of variations in sea water upon the corrosion of aluminum10.5006/0010-9312-36.8.423 ↗
2. Influence of passive film composition and sea water pressure on resistance to localised corrosion of some stainless steels in sea water10.1179/bcj.1995.30.4.283 ↗
3. Combined effect of cathodic potential and sulfur species on calcareous deposition, hydrogen permeation, and hydrogen embrittlement of a low carbon bainite steel in artificial seawater10.1016/j.corsci.2019.07.013 ↗
4. Noise-analysis applied to electrochemical systems10.5006/1.3293585 ↗
5. The electrochemical noise technique—Applications in corrosion research
6. The assessment of a smart anticorrosive coating by the electrochemical noise technique10.1016/j.porgcoat.2012.09.014 ↗
7. Application of EIS and en techniques to investigate the self-healing ability of coatings based on microcapsules filled with linseed oil and CeO2 nanoparticles10.1016/j.porgcoat.2014.12.002 ↗
8. Measuring atmospheric corrosion with electrochemical noise: A review of contemporary methods10.1016/j.measurement.2019.02.027 ↗
9. Identifying defect levels in organic coatings with electrochemical noise (EN) measured in single cell (SC) mode10.1016/j.porgcoat.2018.10.027 ↗
10. Detection of corrosion degradation using electrochemical noise (EN): Review of signal processing methods for identifying corrosion forms
11. Studies on electrochemical noise analysis of an epoxy coating/metal system under marine alternating hydrostatic pressure by pattern recognition method10.1016/j.porgcoat.2016.11.025 ↗
12. Application of the electrochemical noise to investigate the corrosion resistance of an epoxy zinc-rich coating loaded with lamellar aluminum and micaceous iron oxide particles10.1016/j.corsci.2013.07.034 ↗
13. The significance of electrochemical noise measurements on asymmetric electrodes10.1016/j.electacta.2006.12.042 ↗
14. A critical review of electrochemical noise measurement as a tool for evaluation of organic coatings10.1016/j.porgcoat.2016.02.016 ↗
15. Design aspects of electrochemical noise measurements for uncoated metals: Electrode size and sampling rate10.5006/1.3280468 ↗
16. Corrosion of dissimilar alloys: Electrochemical noise10.1016/j.electacta.2011.05.034 ↗
17. Comparison of symmetrical and asymmetrical cells by statistical and wavelet analysis of electrochemical noise data10.5006/0626 ↗
18. (2007). ISO 2808-2007 Paints and Varnishes-determination of Film Thickness, ISO.
19. Drift removal procedures in the analysis of electrochemical noise10.5006/1.3287684 ↗
20. The failure behaviour of an epoxy glass flake coating/steel system under marine alternating hydrostatic pressure10.1016/j.corsci.2014.04.038 ↗
21. Interpretation of EIS data from accelerated exposure of coated metals based on modeling of coating physical properties10.1016/j.electacta.2005.12.047 ↗
22. Application of electrochemical impedance spectroscopy (EIS) for characterizing the corrosion-protective performance of organic coatings on metals10.1016/0033-0655(92)87005-U ↗
23. Characterization of active pigments in damage of organic coatings on steel by means of electrochemical impedance spectroscopy10.1016/0033-0655(94)85022-4 ↗
24. Noise resistance applied to corrosion measurements. 1. Theoretical analysis10.1149/1.1837361 ↗
25. Wavelet transform-based analysis for electrochemical noise10.1016/S1388-2481(99)00053-3 ↗
26. Pitting mechanism on an austenite stainless steel nanocrystalline coating investigated by electrochemical noise and in-situ afm analysis10.1016/j.electacta.2008.06.076 ↗
27. Interpretation of electrochemical noise data10.5006/1.3290350 ↗
28. Noise resistance and shot noise parameters on the study of IGC of aluminium alloys with different heat treatments10.1016/j.electacta.2007.04.094 ↗
29. Electrochemical polarization10.1149/1.2428496 ↗
30. A novel design of electrochemical noise configuration based on embedded-electrodes for in-situ evaluation of epoxy coating under marine alternating hydrostatic pressure10.1016/j.porgcoat.2019.03.005 ↗