journal article·2018-08-29Open access

Influence of SiO2 Particles on the Corrosion and Wear Resistance of Plasma Electrolytic Oxidation-Coated AM50 Mg Alloy

Xiaopeng Lu, Yan Chen, Carsten Blawert, Yan Li, Tao Zhang, Fuhui Wang, Karl Ulrich Kainer, Mikhail Zheludkevich

Coatings· Volume 8· Issue 9

Abstract

The influence of SiO2 particles on the microstructure, phase composition, corrosion and wear performance of plasma electrolytic oxidation (PEO) coatings on AM50 Mg was investigated. Different treatment durations were applied to fabricate coatings in an alkaline, phosphate-based electrolyte (1 g/L KOH + 20 g/L Na3PO4 + 5 g/L SiO2), aiming to control the incorporated amount of SiO2 particles in the layer. It was found that the uptake of particles was accompanied by the coating growth at the initial stage, while the particle content remained unchanged at the final stage, which is dissimilar to the evolution of the coating thickness. The incorporation mode of the particles and phase composition of the layer was not affected by the treatment duration under the voltage-control regime. The corrosion performance of the coating mainly depends on the barrier property of the inner layer, while wear resistance primarily relies on the coating thickness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Corrosion and Protection Division, Shenyang National Laboratory for Materials Science, Northeastern University, Shenyang 110819, China

Key Laboratory for Anisotropy and Texture of Materials (Education Ministry of China), Northeastern University, Shenyang 110004, China

Magnesium Innovation Centre (MagIC), Helmholtz-Zentrum Geesthacht, Max-Planck-Str. 1, 21502 Geesthacht, Germany

Faculty of Engineering, University of Kiel, Kaiserstrasse 2, 24143 Kiel, Germany

Funding

National Natural Science Foundation of China · China Association for Science and Technology · Fundamental Research Funds for the Central Universities

References (35)

Show source-provided references
1. Microstructure and corrosion behavior of Ca/P coatings prepared on magnesium by plasma electrolytic oxidation10.1016/j.surfcoat.2017.04.001 ↗
2. Formation mechanism and corrosion performance of phosphate conversion coatings on AZ91 and Mg–Gd–Y–Zr alloy10.1149/2.0221810jes ↗
3. Fabrication and characterization of Mg-M layered double hydroxide films on anodized magnesium alloy AZ3110.1016/j.apsusc.2017.06.244 ↗
4. Effect of iron content on the corrosion of pure magnesium: Critical factor for iron tolerance limit10.1016/j.corsci.2018.04.024 ↗
5. Ceria embedded nanocomposite coating fabricated by plasma electrolytic oxidation on titanium10.1016/j.jallcom.2016.05.315 ↗
6. Plasma electrolytic oxidation coatings with particle additions—A review10.1016/j.surfcoat.2016.08.055 ↗
7. Active protective PEO coatings on AA2024: Role of voltage on in-situ LDH growth10.1016/j.matdes.2017.01.097 ↗
8. Role of PEO coatings in long-term biodegradation of a Mg alloy10.1016/j.apsusc.2016.08.005 ↗
9. Formation of self-lubricating PEO coating via in-situ incorporation of PTFE particles10.1016/j.surfcoat.2018.01.022 ↗
10. 3D reconstruction of plasma electrolytic oxidation coatings on Mg alloy via synchrotron radiation tomography10.1016/j.corsci.2018.05.019 ↗
11. Wandelt, K. (2018). Plasma electrolytic oxidation (PEO) of metals and alloys. Encyclopedia of Interfacial Chemistry, Elsevier. [1st ed.].
12. Investigation of a novel self-sealing pore micro-arc oxidation film on AM60 magnesium alloy10.1016/j.jma.2013.02.009 ↗
13. Corrosion behavior of a self-sealing pore micro-arc oxidation film on AM60 magnesium alloy10.1016/j.corsci.2015.08.004 ↗
14. Characterization of plasma electrolytic oxidation of magnesium alloy AZ31 in alkaline solution containing fluoride10.1016/j.surfcoat.2015.03.032 ↗
15. An improvement of the wear and corrosion resistances of AZ31 magnesium alloy by plasma electrolytic oxidation in a silicate–hexametaphosphate electrolyte with the suspension of SiC nanoparticles10.1016/j.surfcoat.2015.07.014 ↗
16. Plasma electrolytic oxidation of magnesium and its alloys: Mechanism, properties and applications10.1016/j.jma.2017.02.004 ↗
17. Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ3110.1016/j.corsci.2017.01.025 ↗
18. Insights into plasma electrolytic oxidation treatment with particle addition10.1016/j.corsci.2015.09.016 ↗
19. Plasma electrolytic oxidation coatings on Mg alloy with addition of SiO2 particles10.1016/j.electacta.2015.11.033 ↗
20. Synergistic influence of inorganic oxides (ZrO2 and SiO2) with N2H4 to protect composite coatings obtained via plasma electrolyte oxidation on Mg alloy10.1039/C6CP07135J ↗
21. MgO/ZnO coatings formed on magnesium alloy AZ31 by plasma electrolytic oxidation: Structural, photoluminescence and photocatalytic investigation10.1016/j.surfcoat.2016.12.073 ↗
22. Role of particle type and concentration on characteristics of PEO coatings on AM50 magnesium alloy10.1016/j.surfcoat.2017.11.058 ↗
23. Tribological performance of PEO-WC nanocomposite coating on Mg alloys deposited by plasma electrolytic oxidation10.1016/j.triboint.2016.02.029 ↗
24. Tribological and corrosion behavior of PEO coatings with graphite nanoparticles on AZ91 and AZ80 magnesium alloys10.1016/S1003-6326(18)64659-X ↗
25. Effects of graphite nano-particle additions on dry sliding behaviour of plasma-electrolytic-oxidation-treated EV31A magnesium alloy against steel in air10.1016/j.wear.2018.03.012 ↗
26. Investigation of the formation mechanisms of plasma electrolytic oxidation coatings on Mg alloy AM50 using particles10.1016/j.electacta.2016.03.042 ↗
27. Formation mechanism and surface characterization of ceramic composite coatings on pure titanium prepared by micro-arc oxidation in electrolytes containing nanoparticles10.1016/j.surfcoat.2016.03.013 ↗
28. Characteristics and in vitro response of thin hydroxyapatite-titania films produced by plasma electrolytic oxidation of Ti alloys in electrolytes with particle additions10.1039/C5RA22178A ↗
29. Particle size influences on the coating microstructure through green chromia inclusion in plasma electrolytic oxidation10.1021/acsami.7b03113 ↗
30. Plasma electrolytic oxidation coatings on AZ31 magnesium alloys with Si3N4 nanoparticle additives10.1016/j.surfcoat.2017.05.094 ↗
31. Effect of preparation parameters on the properties of hydroxyapatite containing micro-arc oxidation coating on biodegradable ZK60 magnesium alloy10.1016/j.ceramint.2014.02.104 ↗
32. Influence of electrical parameters on particle uptake during plasma electrolytic oxidation processing of AM50 Mg alloy10.1016/j.surfcoat.2016.02.006 ↗
33. Degradation behavior of PEO coating on AM50 magnesium alloy produced from electrolytes with clay particle addition10.1016/j.surfcoat.2014.11.027 ↗
34. An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing10.1016/j.electacta.2013.08.137 ↗
35. New findings on properties of plasma electrolytic oxidation coatings from study of an Al–Cu–Li alloy10.1016/j.electacta.2013.06.022 ↗