Influence of Complex SiF62− Ions on the PEO Coatings Formed on Mg–Al6–Zn1 Alloy for Enhanced Wear and Corrosion Protection
Source abstract
Abstract
The present study was carried out to explore the effect of SiF62− incorporation and concentration on the plasma electrolytic oxidation (PEO) coatings formed on AZ61 Mg alloy. The coatings were prepared using electrolyte solution with various concentration of Na2SiF6 (0.0–0.7 g/L). Highly compact coatings with minimum porosity were obtained for an optimum concentration of Na2SiF6 ~0.3 g/L added into the electrolyte. The highest corrosion resistance, ~2.04 × 105 Ω·cm2, was obtained for 0.3 g/L of Na2SiF6, in addition to its superior anti-wear properties. However, it was found from the scanning electron microscope (SEM) image analysis that increasing concentration above 0.3 g/L, could cause severe breakdown in the inner layers, and thus the said coatings could not withstand effectively against wear and corrosion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Hongik University, Sejong-si 30016, Korea
School of Materials Science and Engineering, Changwon National University, Changwon 642968, Korea
Funding
Hongik University, Sejong campus
References (24)
Show source-provided references
1. Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications10.1016/j.surfcoat.2006.06.050 ↗
2. Zeng, D., Liu, Z., Bai, S., and Wang, J. (2019). Influence of sealing treatment on the corrosion resistance of PEO coated Al–Zn–Mg–Cu alloy in various environments. Coatings, 99.10.3390/coatings9120867 ↗
3. Protective coatings onmagnesium and its alloys―A critical review10.1016/S0925-8388(01)01899-0 ↗
4. Rahmati, M., Raeissi, K., Toroghinejad, M.R., Hakimizad, A., and Santamaria, M. (2019). Effect of pulse current mode on microstructure, composition and corrosion performance of the coatings produced by plasma electrolytic oxidation on AZ31 Mg alloy. Coatings, 99.10.3390/coatings9100688 ↗
5. Bertuccioli, C., Garzoni, A., Martini, C., Morri, A., and Rondelli, G. (2019). Plasma electrolytic oxidation (PEO) layers from silicate/phosphate baths on Ti–6Al–4V for biomedical components: Influence of deposition conditions and surface finishing on dry sliding behaviour. Coatings, 99.10.3390/coatings9100614 ↗
6. Towards a compact coating formed on Al6061 alloy in phosphate based electrolyte via two-step PEO process and K2ZrF6 additives10.1016/j.surfcoat.2017.09.013 ↗
7. Wang, S., Fu, L., Nai, Z., Liang, J., and Cao, B. (2018). Comparison of corrosion resistance and cytocompatibility of MgO and ZrO2 coatings on AZ31 magnesium alloy formed via plasma electrolytic oxidation. Coatings, 8.10.3390/coatings8120441 ↗
8. Two-Step plasma electrolytic oxidation coatings on AZ91D alloy in a K2ZrF6-Na2SiO3·10H2O based electrolyte solution10.1166/sam.2018.2869 ↗
9. Transformation of plasma electrolytic oxidation coatings from crater to cluster–based structure with increase in DC voltage and the role of ZrO2 nanoparticles10.1016/j.surfcoat.2016.12.112 ↗
10. Effect of Na2SiO3·5H2O concentration on the microstructure and corrosion properties of two-step PEO coatings formed on AZ91 alloy10.1016/j.surfcoat.2017.03.046 ↗
11. Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D10.1016/j.electacta.2006.10.066 ↗
12. Effect of potassium fluoride on structure and corrosion resistance of plasma electrolytic oxidation films formed on AZ31 magnesium alloy10.1016/j.jallcom.2009.01.102 ↗
13. A better understanding of PEO on Mg alloys by using a simple galvanostatic electrical regime in a KOH-KF-Na3PO4 electrolyte10.1016/j.surfcoat.2011.03.019 ↗
14. New magnesium oxide fluorides with hydroxyl groups as catalysts for Michael additions10.1039/b510108e ↗
15. Structural and electrochemical properties of the catalytic CeO2 nanoparticles-based PEO ceramic coatings on AZ91 Mg alloy10.1016/j.jallcom.2017.07.301 ↗
16. Characterization and properties of the MgF2/ZrO2 composite coatings on magnesium prepared by micro-arc oxidation10.1016/j.surfcoat.2008.03.022 ↗
17. Comparison of electrochemical corrosion behaviour of MgO and ZrO2 coatings on AM50 magnesium alloy formed by plasma electrolytic oxidation10.1016/j.corsci.2009.06.034 ↗
18. Investigation of ZrO2 nanoparticles concentration and processing time effect on the localized PEO coatings formed on AZ91 alloy10.1016/j.jma.2019.10.001 ↗
19. Combined effect of long processing time and Na2SiF6 on the properties of PEO coatings formed on AZ91D10.1007/s11665-016-2177-2 ↗
20. A highly compact coating responsible for enhancing corrosion properties of Al–Mg–Si alloy10.1016/j.matlet.2017.03.106 ↗
21. Influence of sodium silicate concentration on properties of micro arc oxidation coatings formed onAZ91HP magnesium alloys10.1016/j.surfcoat.2012.06.018 ↗
22. Characterization of AZ31 Mg Alloy coated by plasma electrolytic oxidation10.1016/j.vacuum.2012.01.009 ↗
23. Wear modelling: Analytical, computational and mapping: A continuum mechanics approach10.1016/S0043-1648(99)00060-5 ↗
24. Effect of fluoride on plasma electrolytic oxidation of AZ61 magnesium alloy10.1016/j.surfcoat.2013.06.107 ↗