Synergistic Effect of Addition of Fillers on Properties of Interior Waterborne UV-Curing Wood Coatings
Source abstract
Abstract
A waterborne ultraviolet (UV)-curing coating was prepared on the surface of wood materials with modification of talcum powder and calcium carbonate (CaCO3). When the waterborne UV-curing coatings on the surface of wood materials (WUVCW) was radiated for 1 min by UV (λ = 365 nm) and dried at 40 °C for 10 min, it showed good hardness, adhesion, and impact strength, with controlling the talcum content of 2.0% and CaCO3 content of 1.0%, respectively. When the content of talcum powder was higher than 2%, the mechanical properties and gloss of the WUVCW decreased, and when the talcum powder of WUVCW increase to more than 5%, a matte surface appeared after curing. When CaCO3 and talcum powder were present at the same time, the mechanical properties of WUVCW were better than those of only CaCO3 or talcum powder.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer composites and self-healing · Photopolymerization techniques and applications · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Furnishings and Industrial Design, Nanjing Forestry University, Nanjing 210037, China
Department of Industrial Chemistry, School of Science and Technology, Meiji University, Kawasaki-shi 214-8571, Japan
References (37)
Show source-provided references
1. UV-protection of wood surfaces by controlled morphology fine-tuning of ZnO nanostructures10.1515/hf-2015-0185 ↗
2. Wu, J.B., Zhang, R.F., Ma, G.Z., Hou, C.Y., and Zhang, H. (2017). Preparation and properties of fluorinated oligomer with tertiary amine structure in the UV curable coatings. J. Appl. Polym. Sci., 134.10.1002/app.44387 ↗
3. Synthesis and characterization of waterborne UV-curable polyurethane nanocomposites based on the macromonomer surface modification of colloidal silica10.1016/j.porgcoat.2013.02.019 ↗
4. Influence of silane coupling agent on corrosion-resistant property in low infrared emissivity Cu/polyurethane coating10.1016/j.porgcoat.2011.11.007 ↗
5. Comparative evaluation of different thermally modified wood samples finishing with UV-curable and waterborne coatings10.1016/j.apsusc.2015.09.259 ↗
6. Synthesis and properties of self-healing waterborne polyurethanes containing disulfide bonds in the main chain10.1007/s10853-016-0321-x ↗
7. Polyurethane encapsulated carbon black particles and enhanced properties of water polyurethane composite films10.1016/j.porgcoat.2016.04.006 ↗
8. Synthesis and characterization of waterborne UV-curablepolyurethane modified with side-chain triethoxysilaneand colloidal silica10.1016/j.colsurfa.2014.12.004 ↗
9. Soy-oil-based waterborne polyurethane improved wet strength of soy protein adhesives on wood10.1016/j.ijadhadh.2016.09.006 ↗
10. Study of the crosslinking process of waterborne UV curable polyurethane acrylates10.1016/j.porgcoat.2016.06.020 ↗
11. The effect of aging tests on gloss and adhesion of lacquer coatings on window elements from pine wood10.12841/wood.1644-3985.C33.19 ↗
12. Effect of dehumidification drying environment on surface gloss of one component waterborne wood top coating10.1016/j.applthermaleng.2016.04.026 ↗
13. Curved sandwich composites with layer-wise graded cores under impact loads10.1016/j.compstruct.2016.09.054 ↗
14. Evaluation of aesthetic durability of waterborne polyurethane coatings applied on wood for interior applications10.1016/j.porgcoat.2011.03.013 ↗
15. Preparation and characterization of UV curable waterborne poly(urethane-acrylate)/antimony doped tin oxide thermal insulation coatings by sol-gel process10.1016/j.porgcoat.2017.08.004 ↗
16. The utilization of carbon nitride to reinforce the mechanical and thermal properties of UV-curable waterborne polyurethane acrylate coatings10.1016/j.porgcoat.2015.07.021 ↗
17. Nanoferrite dispersed waterborne epoxy-acrylate: Anticorrosivenanocomposite coatings10.1016/j.porgcoat.2014.11.023 ↗
18. Waterborne UV-curable polyurethane acrylate/silica nanocomposites for thermochromic coatings10.1039/C5RA01687H ↗
19. Novel application method of talcum powder to prevent sticking tendency and modify release of esomeprazole magnesium enteric-coated pellets
20. Effects of talcum powder (talc) and compounding sequence on the morphology and mechanical properties of PA6/PP/MAPP blend
21. Physicomechanical and physicochemical characterizations of biexponential compaction process of paracetamol in the presence of talcum-lubricated-MCC10.1016/j.powtec.2014.12.039 ↗
22. Property optimization of calcium carbonate precipitated in a high shear, circulation reactor10.1016/j.powtec.2016.09.031 ↗
23. (1993). GB/T 1732-93 Determination of Impact Resistance of Film, In Chinese.
24. (1979). GB/T 1720-89 Determination of Adhesion of Film, In Chinese.
25. (1996). GB 6739-1996 Determination of Film Hardness by Pencil Test, In Chinese.
26. (2007). GB/T1730-2007 Paints and Varnishes-Pendulum Damping Test, In Chinese.
27. Influence of substrate material and its plasma pretreatment on adhesion and properties of WC/a-C:H nanocomposite coatings deposited at low temperature10.1016/j.surfcoat.2017.10.081 ↗
28. Manipulation of mechanical properties of short pineapple leaf fiber reinforced natural rubber composites through variations in cross-link density and carbon black loading10.1016/j.polymertesting.2016.07.002 ↗
29. Mechanical interlocking by imprinting of undercut micropatterns for improving adhesive strength of polypropylene10.1016/j.ijadhadh.2016.03.002 ↗
30. Development and preliminary field validation of water-resistant cellulose nanofiber based coatings with high surface adhesion and elasticity for reducing cherry rain-cracking10.1016/j.scienta.2016.01.016 ↗
31. Evolution of the dynamic fatigue failure of the adhesion between rubber and polymer cords10.1016/j.polymertesting.2015.10.014 ↗
32. (2008). GB/T3324-2008 Wooden Furniture-General Technical Requirements, In Chinese.
33. Lightness perception for matte and glossy complex shapes10.1016/j.visres.2016.12.004 ↗
34. UV-curable waterborne polyurethane-acrylate: Preparation, characterization and properties10.1016/j.porgcoat.2011.08.019 ↗
35. Effects of the NCO/OH molar ratio and the silica contained on the properties of waterborne polyurethane resins10.1016/j.colsurfa.2017.03.022 ↗
36. Friction and wear durability study of epoxy-based polymer (SU-8) composite coatings with talc and graphite as fillers10.1016/j.wear.2016.06.011 ↗
37. Mechanical properties of UV-cured cellulose nanocrystal (CNC) nanocomposite coating for wood furniture10.1016/j.porgcoat.2016.11.031 ↗