Influence of Water Concentration on Its Mobility in Matrimid®
Source abstract
Abstract
Mobility of water in polyheteroarylene (Matrimid®) was simulated at 300 K and different concentrations of water (0.5 wt.%–3 wt.%). Parameters of anomalous diffusion were calculated from molecular dynamics simulations on the base of mean square displacements of water molecules. It was found that mobility of water has nonmonotonic dependence on its concentration. Lower diffusion rates at concentrations below than 1 wt.% can be attributed to the sorption of water onto the polar groups of polymer (sorption sites). Decreasing of diffusion rate with increasing of water concentration is due to the formation of clusters of water molecules, which hampers the penetration of water between polymer chains.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Membrane Separation and Gas Transport · Polymer crystallization and properties · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Saint Petersburg State University, Universitetskaya nab. 7/9, Saint Petersburg 199034, Russia
Institute of Macromolecular Compounds, Russian Academy of Sciences, Bolshoy pr. 31, Saint Petersburg 199004, Russia
Funding
Russian Science Foundation
References (29)
Show source-provided references
1. Polyimides membranes for pervaporation and biofuels separation10.1016/j.progpolymsci.2009.06.001 ↗
2. Aromatic polyimide and crosslinked thermally rearranged poly (benzoxazole-co-imide) membranes for isopropanol dehydration via pervaporation10.1016/j.memsci.2015.10.059 ↗
3. Novel thermally cross-linked polyimide membranes for ethanol dehydration via pervaporation10.1016/j.memsci.2015.08.055 ↗
4. Membrane materials based on polyheteroarylenes and their application for pervaporation10.1070/RCR4546 ↗
5. Composites of multiblock (segmented) aliphatic poly(ester imide) with zirconia nanoparticles: Synthesis, mechanical properties, and pervaporation behavior10.1134/S1560090414060165 ↗
6. Sokolova, M.P., Smirnov, M.A., Bugrov, A.N., Geydt, P., Popova, E.N., Lahderanta, E., Svetlichnyi, V.M., and Toikka, A.M. (2017). Structure of composite based on polyheteroarylene matrix and ZrO2 nanostars investigated by quantitative nanomechanical mapping. Polymers, 9.10.3390/polym9070268 ↗
7. Network cross-linking of polyimide membranes for pervaporation dehydration10.1016/j.seppur.2017.05.037 ↗
8. Sokolova, M.P., Smirnov, M.A., Geydt, P., Bugrov, A.N., Ovaska, S.-S., Lahderanta, E., and Toikka, A.M. (2016). Structure and transport properties of mixed-matrix membranes based on polyimides with ZrO2 nanostars. Polymers, 8.10.3390/polym8110403 ↗
9. Thermally treated ammonia functionalized graphene oxide/polyimide membranes for pervaporation dehydration of isopropanol10.1016/j.memsci.2017.01.038 ↗
10. DSC investigation of the sates of water in poly(vinyl alcohol) membranes10.1016/0032-3861(85)90254-X ↗
11. Phase transition on the water-sodium poly (styrenesulfonate) system10.1016/0040-6031(85)85433-2 ↗
12. Microsecond atomic-scale molecular dynamics simulations of polyimides10.1021/ma4011632 ↗
13. Computer simulation of the heat-resistant polyimides ULTEMTM and EXTEMTM with the use of GROMOS53a6 and AMBER99 force fields10.1134/S0965545X14040063 ↗
14. Molecular-dynamics simulation of polyimide matrix pre-crystallization near the surface of a single-walled carbon nanotube10.1039/C3RA45010D ↗
15. Clustering of solvents in membranes and its influence on membrane transport properties10.1016/0376-7388(95)00219-7 ↗
16. Transport of water and methanol vapors in alkyl substituted poly (norbornene)10.1016/j.polymer.2004.02.017 ↗
17. Sorption/desorption properties of ethanol, toluene, and xylene in poly (dimethylsiloxane) membranes10.1002/app.1994.070511014 ↗
18. Sorption of vapors by high polymers10.1021/j150538a010 ↗
19. Plasticizing of chitosan films with deep eutectic mixture of malonic acid and choline chloride10.1016/j.carbpol.2018.06.037 ↗
20. Sod-ZMOF/Matrimid® mixed matrix membranes for CO2 separation10.1016/j.memsci.2015.04.003 ↗
21. Fabrication of defect-free Matrimid® asymmetric membranes and the elevated temperature application for N2/SF6 separation10.1016/j.memsci.2019.01.050 ↗
22. Matrimid®5218 dense membrane for the separation of azeotropic MeOH-MTBE mixtures by pervaporation10.1016/j.seppur.2018.01.045 ↗
23. Relaxation dynamics of thin Matrimid 5218 films in organic solvents10.1021/acs.jpcb.9b00688 ↗
24. Kinetic and equilibrium sorption of organic liquids and vapors in Matrimid10.1016/j.memsci.2016.03.054 ↗
25. An all-electron numerical method for solving the local density functional for polyatomic molecules10.1063/1.458452 ↗
26. From molecules to solids with the DMol3 approach10.1063/1.1316015 ↗
27. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
28. UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations10.1021/ja00051a040 ↗
29. Non-fickian diffusion of water in polylactide10.1021/ie302342m ↗