Electrical simulation of a p–i–n image sensor
Source abstract
Abstract
Abstract We have modelled a p–i–n image sensor under local illumination through a two-dimensional non-linear circuit. The sensor is described as an array of photodiodes interconnected through lateral resistors, which model the sheet resistance of the doped layers. Under small-signal analysis, each photodiode is modelled by a current-controlled resistor proportional to the inverse of the photocurrent. A SPICE based simulator is used to analyse the sensor output characteristics. Several configurations and contact geometries are analysed for the image transducer. The image responsivity, the spatial resolution and the image distortion are modelled by changing the ratio between the transversal and the lateral resistors or the acquisition points. Results show that the geometry and location of the contacts affect the distortion of the restored image. The conductivity of the doped layers and the light flux illumination influences the image resolution and accuracy. The simulated and experimental results were found in a good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: CCD and CMOS Imaging Sensors · Analytical Chemistry and Sensors · Infrared Target Detection Methodologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Antognetti P, Massobrio G, editors. Semiconductor device modeling with SPICE. New York: McGraw-Hill, 1993.
2. Vieira M, Fernandes M, Martins J, Louro P, Maçarico A, Schwarz R, Schubert M. Materials Research Society Symposium Proceedings, San Francisco: MRS, April 2001, to be published.
3. Koch C, Ito M, Schubert M, Werner JH. Materials Research Society Symposium Proceedings 557. San Francisco: MRS, 1999. p. 749.10.1557/PROC-557-749 ↗
4. Fernandes M, Vieira M, Martins J, Louro P, Maçarico A, Schwarz R, Schubert M. Influence of the transducer configuration on the p–i–n image sensor resolution. Thin Solid Films 2001, to be published.10.1016/S0040-6090(00)01785-5 ↗
5. Wallmark
6. Wilson · 1998
7. Microcrystalline silicon thin films for optical applications10.1016/S0042-207X(98)00216-4 ↗
8. Martins · 1999
9. Sousa · J Non-Cryst Solids · 1228 · 2000 · 266