Correction analysis for the deviation between vacuum furnace and material growth temperatures
Source abstract
Abstract
Abstract To resolve a general problem that exist differences between the vacuum furnace instrument display temperature (TD, detected by thermocouple generally) and that on the substrate surface (TS) for growing thin films, we present here an effective method for measuring the real TS values as well as correcting the temperature difference between TD and TS. Concurrently, a set of heat conduction models, which is used to derive a theoretical equation for describing the relationship between TD and TS, has been well constructed. It indicates that the temperate difference ΔT (ΔT = TD - TS) increase with the decrease of chamber vacuum, while decrease with the reduction of distance between the tungsten heater and sample holder. Our calculated results based on the theoretical equation can be well agreed with the experimental data in the temperature range of 600–1000 K, but exhibit a deviation with experimental ones below 600 K. In this article, the reason for inducing the temperature deviations between experiment and theoretical calculation has been well elucidated. Our work provides a useful technique to understand the basis of temperature deviation in general heating and thermal conduction systems, at the same time, presents a simple and practicable method to correct this deviation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal properties of materials · Calibration and Measurement Techniques · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Enhanced photoelectrochemical properties of Ta-TiO2 nanotube arrays prepared by magnetron sputtering10.1016/j.vacuum.2016.12.049 ↗
2. Enhanced performance of quantum dots light-emitting diodes: the case of Al2O3 electron blocking layer10.1016/j.vacuum.2016.12.017 ↗
3. Preparation and thermoelectric properties of MoTe2 thin films by magnetron co-sputtering10.1016/j.vacuum.2017.01.030 ↗
4. Structural characterization of InAs quantum dot chains grown by molecular beam epitaxy on nanoimprint lithography patterned GaAs(100)10.1088/0957-4484/22/29/295604 ↗
5. Tunable photoluminescence from nc-Si/a-SiNx:H quantum dot thin films prepared by ICP-CVD10.1039/c3cp43875a ↗
6. Optimizing the PVD TiN thin film coating's parameters on aerospace AL7075-T6 alloy for higher coating hardness and adhesion with better tribological properties of the coating surface10.1007/s00170-012-4022-6 ↗
7. Convection heat transfer model and verification for the vacuum chamber during charge and discharge processes10.1016/j.vacuum.2017.02.016 ↗
8. Infrared temperature measurement of the laminar wake of a hypersonic sphere10.2514/3.2936 ↗
9. Temperature recovery from degenerated infrared image based on the principle for temperature measurement using infrared sensor10.1063/1.4863783 ↗
10. An inverse method for flue gas shielded metal surface temperature measurement based on infrared radiation10.1088/0957-0233/27/7/074002 ↗
11. Yang · 2014
12. Analysis of multi-band pyrometry for emissivity and temperature measurements of gray surfaces at ambient temperature10.1016/j.infrared.2016.03.014 ↗
13. Melting of gold, silver, and copper—proposal for a new high-pressure calibration scale
14. Pressure dependence of the melting temperature of metals10.1103/PhysRevB.40.5929 ↗
15. Pressure effect on the melting point of noble metals10.1002/pssb.2221430111 ↗
16. Theoretical calculations of high-pressure melting curves of five metals
17. High melting points of tantalum in a laser-heated diamond anvil cell10.1103/PhysRevLett.104.255701 ↗
18. Melting of lead under high pressure studied using second-scale time-resolved x-ray diffraction
19. Melting curve of aluminum in a diamond cell to 0.8 Mbar: implications for iron10.1016/S0012-821X(97)00188-X ↗
20. Free energy method and the melting point of aluminum under the zero pressure10.7498/aps.57.61 ↗
21. Radiative heat transfer10.1115/1.4023596 ↗
22. Zhan · 2009
23. Bianchi · 2008
24. Spectral emissivity, total emissivity, and thermal conductivity of molybdenum, tantalum, and tungsten above 2300°K10.1063/1.1735847 ↗
25. Measurement of thermophysical properties by a pulse-heating method : tungsten, 1200 to 3600 K
26. Evolution of the emissivity of tungsten at high temperature with and without proton bombardment10.1016/j.actamat.2014.10.050 ↗
27. Influence of roughness and composition on the total emissivity of tungsten, rhenium and tungsten–25% rhenium alloy at high temperature10.1016/j.jallcom.2013.09.184 ↗