Fast, uniform, and large-scale heat treatment by plasma-based electrons
Source abstract
Abstract
Abstract Heat treatment of steels by electron beams with an energy density ranging from 1 to 10 kW/cm 2 results in a considerable hardness improvement and wear reduction. However, electron beam treatment is a typical line-of-sight process and demands a complicated target manipulation and beam-rastering system. A new method, circumventing the limitations inherent in the scanning electron beam treatment is presented. The workpiece to be treated is immersed into the plasma and surrounded by a negatively biased grid, preventing the penetration of plasma electrons. Further, the workpiece is connected to a positive DC high voltage source of about 20 kV and a capacitor, acting as an energy storage. Changing the grid bias, electrons are extracted from the plasma and accelerated by the positive potential towards the workpiece. During the pulsed electron bombardment, power densities of about 10 kW/cm 2 can be achieved, resulting in a rapid thermal heating and self-quenching, occurring after the electron pulse. Detailed investigations are presented on the response of plasma if electrons are extracted by a large electrode with special emphasis on the processes near the wall and near the control grid.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Welding Techniques and Residual Stresses · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.