Patterning of a micromechanical coplanar waveguide using a dry etching technique
Source abstract
Abstract
Abstract GaAs micromachining technology was used for fabricating coplanar transmission lines on membrane-like AlGaAs/GaAs and InGaP/GaAs bridges. A front-side surface micromachining is combined with a back-side bulk GaAs micromachining. A double-side aligned selective reactive ion etching of GaAs and GaAs heterostructures through the openings in masks, using AlGaAs or InGaP as an etch-stop layers is then used for three-dimensional patterning of the bridge based micromechanical coplanar wavequide (MCPW). MCPW test structures of various lengths (150–900 μm) were defined by Ti/Au metallization. A lift-off technique was used to pattern the transmission lines in accordance with the MCPW simulation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Engineering and Waveguides · Advanced Antenna and Metasurface Technologies · Advanced MEMS and NEMS Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Weller · IEEE Trans Microwave Theory Tech · 1995 · 43 · 53410.1109/22.372098 ↗
2. Frankel · IEEE Trans Microwave Theory Tech · 1994 · 42 · 39610.1109/22.277432 ↗
3. Georgakilas A, Lalinský T. Six-monthly progress report of the NATO project SfP-974172, May, 2000.
4. Tomáška M, Lalinský T, Krnáč M, Klasovitý M, Mozolová Ž, Haščı́k Š, Kostič I. In: International Symposium on Electron Devices for Microwave and Optoelectronic Applications, EDMO 2001. Vienna: Technical University of Vienna, 2001. p. 211.
5. Haščı́k · Vacuum · 1994 · 45 · 91510.1016/0042-207X(94)90133-3 ↗
6. Haščı́k · Kuzmik J Vac · 1998 · 51 · 30710.1016/S0042-207X(98)00181-X ↗
7. Haščı́k · Vacuum · 1996 · 47 · 121510.1016/0042-207X(96)00129-7 ↗
8. Tomáška M, Klasovity M, Krnac M, Kovacik T. In: Proceedings of the 11th Conference on Microwave Technique, COMITE 2001, September 18–19, 2001, ISBN 80-902417-9-4.
9. Lalinský T, Držı́k M, Tomáška M, Kostič I, Matay L, Mozolová Ž, Haščı́k Š. In: Proceedings of the 12th Micromechanics Europe Workshop—MME 2001, September 16–18, Cork, 2001. p. 273.
10. Lalinský · J Micromech Microeng · 2002 · 12 · 46510.1088/0960-1317/12/4/320 ↗