journal article·2020-07

Test method for residual stress analysis of the inner surface of small caliber Ti-3Al-2.5V tubing by X-ray diffraction

Wenrui Wang, Lihong Yuan, Yun Li, Mengyao Yang, Hui Zhang, Wangfeng Zhang

Vacuum· Volume 177
Publisher page

Abstract

Abstract The residual stresses of Ti-3Al-2.5V tubing have effects on both fatigue performance and stress corrosion resistance. The inner surface, which directly contacts the hydraulic fluid of the aircraft, is the working surface of Ti-3Al-2.5V aerospace hydraulic tubing and fatigue cracks probably initiate on the inner surface. However, measuring residual stresses on the inner surface of small caliber tubing is difficult using X-ray diffraction at diffraction angles (2θ) of higher than 120° because the X-rays would be shaded by the outer surface. In this work, the as-received Ti-3Al-2.5V tubing was transversely cut using an electric discharge machine to obtain a sample having a length that was suitable for subsequent measurements and as long as possible to avoid stress relief. Then a diffractometer with Cu Kα radiations was used to scan the lattice planes {103} at the 2θ of 70.631° for the inner surface stresses of the sample. In particular, to avoid shading effects, we let the incident X-rays enter from one end of the sample and let the diffracted radiations exit from the other end. This work is of theoretical significance and application value for optimizing stress relief annealing process and for X-ray stress analysis of titanium and other metallic tubing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Metal and Thin Film Mechanics · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Leyens · 2003 · 333
2. Creep mechanisms in Ti–3Al–2.5V alloy tubing deformed under closed-end internal gas pressurization10.1016/j.actamat.2008.01.052 ↗
3. Performance evaluation and control methods of high strength TA18 alloy tube
4. Effect of crystallographic texture on flexure fatigue properties of Ti-3Al-2.5V hydraulic tubing10.1520/JTE12459J ↗
5. McMeeking · 1982 · 315
6. Stresses in bent copper tubing: application to fatigue and stress-corrosion cracking failure mechanisms10.1361/154770205X76367 ↗
7. Effect of heat treatment on the mechanical properties of copper clad steel plates10.1016/j.vacuum.2018.05.022 ↗
8. The effect of sample position on the determination of triaxial stress by X-ray diffraction10.1107/S0021889887008860 ↗
9. Characterisation of ZrO2 films prepared by rf reactive sputtering at different O2 concentrations in the sputtering gases10.1016/S0042-207X(99)00199-2 ↗
10. Determination of creep-induced residual stress in fiber-reinforced glass–ceramic matrix composites by X-ray diffraction10.1016/S1044-5803(01)00151-6 ↗
11. X-ray diffraction measurement of residual stress in PZT thin films prepared by pulsed laser deposition10.1016/j.actamat.2004.02.047 ↗
12. Test and analysis of the residual stress in Ti-3Al-2.5V tubes with different processes
13. 2008
14. Measurements of residual stress and microstructural evolution in electron beam welded Ti-6Al-4V using multiple techniques10.1016/j.matchar.2017.07.042 ↗
15. The effect of pipe thickness on residual stresses due to girth welds10.1115/1.3264205 ↗
16. Calculation of residual stress induced by machining in internal surface of TC4 tubular parts and its FEA
17. Phase identification and internal stress analysis of steamside oxides on plant exposed superheater tubes10.1007/s11661-011-0874-x ↗
18. Timoshenko · 1951 · 55
19. Failure assessments of corroded pipelines with axial defects using stress-based criteria: numerical studies and verification analyses10.1016/j.ijpvp.2008.11.011 ↗
20. Measurement and evaluation of crystallographic texture in Ti-3Al-2.5V tubing10.1007/s11665-015-1507-0 ↗
21. Tribological properties of WS2 composite film prepared by a two-step method10.1016/j.vacuum.2010.03.003 ↗
22. The slope standard error and correlation coefficient of zero-crossing linear fitting
23. The influence of cylindrical geometry on X-ray stress tensor analysis. I. General formulation10.1107/S0021889895006868 ↗
24. The influence of cylindrical geometry on X-ray stress tensor analysis. II. applications10.1107/S0021889899003829 ↗
25. Residual stress, stress relief, and inhomogeneity in aluminum plate10.1016/S1359-6462(01)01201-5 ↗
26. Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld10.1016/j.actamat.2006.04.034 ↗
27. Timoshenko · 1951 · 29
28. Simulation and analysis of effect of cutting machining on residual stress distribution in thick aluminum alloy plate
29. The approximation of symmetric X-ray peaks by Pearson type VII distributions10.1107/S0021889877012849 ↗