journal article·2023-07

Proposal of new stable Ru-based intermetallics, XRu3 (X = V, Nb and Ta): Prediction of their bulk properties and their surfaces adsorption behavior and sensing properties to small gases

Amer Saoudi, Khelifa Haddadi, Youcef Medkour, Amar Mosbah, Mounir Reffas, Gökay Uğur, Mebarek Boukelkoul, Sarra Bouriachi

Vacuum· Volume 213
Publisher page

Abstract

The fundamental physical properties of VRu3, NbRu3 and TaRu3 were studied using CASTEP package. Their stabilities were confirmed by calculating the enthalpy of formation and the phonon dispersion spectra. These Ru-based intermetallics are conductors with a strong covalent bond and have demonstrated interesting thermomechanical properties: high Vickers hardness, low thermal conductivity, high fracture toughness and high melting point, making them good candidates for high-temperature application. Adsorption behavior and sensing properties of XRu3(100), XRu3(110) and XRu3(111) surfaces at H2, N2, O2, CO, NO, CO2, N2O, NO2, H2S, SO2, H2O, NH3 and CH4 have also been studied. In all cases, a physisorption interaction was found with an adsorption energy between −19 and −75 meV. The gas adsorption capacity follows the order SO2 > H2S > CH4 > CO2 > NH3 > N2O > CO > H2O > N2 > O2 > OH > H2. VRu3(111), NbR3(111) and TaRu3(110) are the most suitable adsorption surfaces. Gas recovery times have proven to be very short, on the order of a few picoseconds. Among the tested gases, CO2, H2S, SO2, NH3 and CH4 show high recovery times with VRu3(111), NbRu3(111) and TaRu3(110).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Boron and Carbon Nanomaterials Research · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Effect of hafnium ternary addition on ductility of aerospace material Rh3Ta – a theoretical study
2. Creep strength of a tungsten–rhenium–hafnium carbide alloy from 2200 to 2400 K10.1016/S0921-5093(98)01134-4 ↗
3. First examples of nickel–Aluminum mixed chalcogenides based on the AuCu3-type fragments: breaking a robust intermetallic bond system in Ni3Al10.1016/j.jssc.2021.122815 ↗
4. First-principle calculations of the electronic, elastic and thermoelectric properties of Ag doped CuGaTe210.1016/j.intermet.2014.08.005 ↗
5. Intermetallic Co2FeIn heusler alloy nanowires for spintronics applications10.1021/acsanm.8b01836 ↗
6. Intermetallic compounds in catalysis – a versatile class of materials meets interesting challenges10.1080/14686996.2020.1758544 ↗
7. AES and TDS study of CO interaction with Rh layers on Al substrate10.1016/S0042-207X(01)00164-6 ↗
8. Deformation and fracture of intermetallics10.1016/0956-7151(93)90148-L ↗
9. Fracture toughness of NiAl and NiAl-based composites10.1016/0956-7151(92)90419-F ↗
10. In-situ synthesis of Ti–Al intermetallic compounds coating on Ti alloy by magnetron sputtering deposition followed by vacuum annealing10.1016/j.vacuum.2019.109060 ↗
11. Magnetron technology for preparation of tape superconductors with Nb3Ge coating10.1016/j.vacuum.2022.111711 ↗
12. Microstructure and mechanical properties of Al-Ti-Zr intermetallic compounds prepared by vacuum hot pressing10.1016/j.vacuum.2018.01.033 ↗
13. Study on CoAl intermetallic compound films for advanced interconnect applications: experimental and DFT investigations10.1016/j.vacuum.2022.111528 ↗
14. Microstructure, phase composition and hardness of Ti–Au cladding deposited on Ti–6Al–4V substrate by electron beam powder bed fusion method10.1016/j.vacuum.2022.111289 ↗
15. Rietveld refinement of the A3B (D019) and A2B (B82) phases in Ti-Sn and Ti-Ga alloys10.1016/j.intermet.2011.06.004 ↗
16. Growth kinetics analysis of Nb–Al intermetallic compounds interfacial layers based on Nb–Al phase diagram10.1016/j.vacuum.2021.110589 ↗
17. Dislocation structure in precipitation-hardened Ir-based binary alloys10.4028/www.scientific.net/DDF.188-190.171 ↗
18. Rh-base refractory superalloys for ultra-high temperature use10.1016/S1359-6462(96)00408-3 ↗
19. Ir-base refractory superalloys for ultra-high temperatures10.1007/s11661-998-0135-9 ↗
20. Structural, elastic, electronic, phonon and thermal properties of Ir3Ta and Rh3Ta alloys10.1080/09500839.2015.1076175 ↗
21. Characterization of thermally stable Ir–Ta alloy thin films deposited by sputtering10.1016/j.vacuum.2004.01.058 ↗
22. Mechanical properties of Rh-based L12 intermetallic compounds Rh3Ti, Rh3Nb and Rh3Ta10.1016/j.msea.2005.08.219 ↗
23. Characterization of thermally stable Ir–Ta alloy thin films deposited by sputtering10.1016/j.vacuum.2004.01.058 ↗
24. Elastic properties of platinum Rh and Rh3X compounds10.1016/j.physleta.2004.09.034 ↗
25. Thermal conductivity and thermal expansion of Ir3X (X= Ti, Zr, Hf, V, Nb, Ta) compounds for high-temperature applications10.1016/S0254-0584(02)00109-8 ↗
26. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
27. Restoring the density-gradient expansion for exchange in solids and surfaces10.1103/PhysRevLett.100.136406 ↗
28. Relaxation of crystals with the quasi-Newton method10.1006/jcph.1996.5612 ↗
29. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
30. Self-interaction correction to density-functional ap-proximations formany-electron systems10.1103/PhysRevB.23.5048 ↗
31. Elasticity of hexagonal BeO10.1088/0953-8984/13/2/302 ↗
32. Blanco · Comput. Phys. Commun. · 2004 · 158 · 5710.1016/j.comphy.2003.12.001 ↗
33. The compressibility of media under extreme pressures10.1073/pnas.30.9.244 ↗
34. Elasticity and constitution of the Earth's interior10.1029/JZ057i002p00227 ↗
35. Universal features of the equation of state of solids10.1088/0953-8984/1/11/002 ↗
36. The crystal structures of new superconducting materials obtained by high pressure treatment
37. On the stability of crystal lattices. I10.1017/S0305004100017138 ↗
38. Zener · 1948
39. Structure and elasticity of MgO at high pressure10.2138/am-1997-1-207 ↗
40. Lehrbuch der Kristallphysik teubner
41. Calculation of the flow limits of mixed crystals on the basis of the plasticity of monocrystals10.1002/zamm.19290090104 ↗
42. The elastic behavior of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
43. Relations between the elastic moduli and the plastic properties of polycrystalline pure metals10.1080/14786440808520496 ↗
44. Universal elastic anisotropy index10.1103/PhysRevLett.101.055504 ↗
45. Nye · 1985
46. A simplified method for calculating the Debye temperature from elastic constants10.1016/0022-3697(63)90067-2 ↗
47. Modeling hardness of polycrystalline materials and bulk metallic glasses10.1016/j.intermet.2011.03.026 ↗
48. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
49. Elastic constants versus melting temperature in metals10.1016/0036-9748(84)90267-9 ↗
50. Simple and accurate model of fracture toughness of solids10.1063/1.5066311 ↗
51. Ab initio study of CNT NO2 gas sensor10.1016/j.cplett.2004.02.026 ↗