Reprint of: Effect of pulse parameter change on a-SiCN diaphragms for environmental cells fabricated by magnetic-field- and pulsed-plasma-enhanced chemical vapor deposition
Source abstract
Abstract
An amorphous silicon carbonitride (a-SiCN) diaphragm for environmental cells was developed by magnetic-field- and pulsed-plasma-enhanced chemical vapor deposition using a unique power source of variable pulse parameters. A positive square wave pulse voltage of 500 V in a pulse width range from 10 μs to 500 μs was alternately supplied to the upper and lower of two parallel electrodes for plasma generation with the precursor gases hexamethyldisilazane, Ar, and N2. By supplying pulse voltages alternately to both electrodes, rather than only the upper electrode, the influence of charging could be suppressed. To investigate the effect of the pulse parameter on film nitridation, a-SiCN diaphragms were prepared by three methods of plasma generation: (1) different pulse frequencies with the same pulse width to both electrodes, (2) the same pulse frequency with a different pulse width to both electrodes, and (3) the same pulse width including a no-voltage-supply time to both electrodes. The diaphragm, which was fabricated by supplying a 50-μs pulse width at 10 kHz to both electrodes, had the highest nitrogen component ratio of 28.9%. Enhancement of film nitridation was thought to be due to the increase in the number of collisions of ions in the plasma.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research · Laser-induced spectroscopy and plasma
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Mechanical and optical properties of hard SiCN coatings prepared by PECVD10.1016/S0040-6090(03)01057-5 ↗
2. Effect of the deposition conditions on the morphology and bonding structure of SiCN films10.1016/j.matchemphys.2004.01.015 ↗
3. Structural and optical properties of amorphous hydrogenated silicon carbonitride films produced by PECVD10.1016/j.apsusc.2005.10.017 ↗
4. Mechanical and optical properties of hard SiCN coatings prepared by PECVD
5. Development of magnetic-field and pulsed-plasma-enhanced chemical vapor deposition method to fabricate amorphous silicon carbonitride diaphragm for environmental-cell transmission electron microscope10.1016/j.vacuum.2015.03.029 ↗
6. Improvement of windowed type environmental-cell transmission electron microscope for in situ observation of gas-solid10.1063/1.3250862 ↗
7. Hard x-ray photoelectron spectroscopy using an environmental cell with silicon nitride membrane windows10.1063/1.4922335 ↗
8. Mass-spectrometric studies of catalytic chemical vapor deposition processes of organic silicon compounds containing nitrogen10.1143/JJAP.45.961 ↗
9. Synthesis of carbon nitride thin films as A new super hard material-is the material harder than diamond possible?10.4139/sfj.47.407 ↗
10. Characteristics of thin plasmachemical silicon carbon nitride films deposited using hexamethyldisilane10.1007/s11106-009-9096-9 ↗
11. Binding energy of amorphous CN and SiCN films on X-ray photoelectron spectroscopy10.1143/JJAP.40.L123 ↗
12. Ultralow-k dielectrics prepared by plasma-enhanced chemical vapor deposition10.1063/1.1392976 ↗