journal article·2021-12

Characterization of the average pore diameter of nanoporous media by gas permeability measurement technique in transitional flow regime

Xudi Wang, Renchao Chang, Yunsheng Ding, Bin Zhou, Qing Cao, Hailin Bi

Vacuum· Volume 194
Publisher page

Abstract

Abstract In this paper, a gas permeability measurement technique in transitional flow regime was proposed, which could characterize the average pore diameter of nanoporous media non-destructively. With high purity argon and carbon dioxide, the conductance of three groups of porous anodic alumina was tested respectively in the transitional flow regime by the dynamic differential pressure attenuation test system, and the average pore diameter of porous anodic alumina was derived. The average pore diameters obtained through the gas permeability measurement technique are consistent with the SEM image analysis results, and the relative error is less than 8%. This method based on the improved transitional flow conductance theory extends the pore-size range of gas permeability measurement technique from micrometer to the nanometer scale, and does not require high pressure or high vacuum. It has the advantages of non-destruction, high-accuracy and large-area-measurement, which brings significant practical application value.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Dynamics and Kinetic Theory · Anodic Oxide Films and Nanostructures · Nanopore and Nanochannel Transport Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Advances in micro/nanoporous membranes for biomedical engineering10.1002/adhm.202001545 ↗
2. New leak element using anodic aluminum oxide10.1016/j.vacuum.2016.06.007 ↗
3. Fabrication of conductance-controllable standard leak elements on anodic aluminum oxide using a selective coating method10.1116/1.4985621 ↗
4. Gas permeability in rarefied flow conditions for characterization of mineral membrane support10.1016/j.euromechflu.2019.07.005 ↗
5. The fluid mechanics of microdevices—the freeman scholar lecture10.1115/1.2822013 ↗
6. Characterization of track etched membranes by gas permeation10.1016/S0360-3199(03)00107-1 ↗
7. Characterization of polycarbonate nuclear track-etched membranes by means of the gas permeation method10.1016/S0168-9002(98)00760-8 ↗
8. New and modified anodic alumina membranes: Part III. Preparation and characterisation by gas diffusion of 5 nm pore size anodic alumina membranes
9. Determination of an effective pore dimension for microporous media10.1016/j.ijheatmasstransfer.2019.07.062 ↗
10. Data on internal rarefied gas flows10.1063/1.556019 ↗
11. Mass flow rate measurements in a MicroChannel: from hydrodynamic to free molecular regime10.1017/S0022112007006374 ↗
12. Gas permeation through nanoporous membranes in the transitional flow region10.1088/0957-4484/27/8/085707 ↗
13. Rarefied gas flow through a long tube at any pressure ratio10.1116/1.578969 ↗
14. Rarefied gas flow through a long tube at arbitrary pressure and temperature drops10.1116/1.580904 ↗
15. Time-dependent methodology for non-stationary mass flow rate measurements in a long micro-tube: experimental and numerical analysis at arbitrary rarefaction conditions10.1007/s10404-017-1920-9 ↗
16. Investigation of rarefied gas flow in microchannels of non-uniform cross section10.1063/1.4942183 ↗
17. Rarefied gas flow through a zigzag channel10.1016/j.vacuum.2012.02.028 ↗
18. Predicting the Knudsen paradox in long capillaries by decomposing the flow into ballistic and collision parts
19. Pressure-driven diffusive gas flows in micro-channels: from the Knudsen to the continuum regimes10.1007/s10404-008-0344-y ↗