journal article·2019-02Open access

Transition region: It is crucial to study the failure of 2.86 wt%Cr Si Mn Cu iron alloy under impact wear

Yi Li, Renbo Song, Zhiyang Zhao, Yu Pei

Vacuum· Volume 160

Abstract

The transition region in worn surface of a 2.86 wt%Cr iron alloy was investigated under dry impact wear test , and apparatus consist of repeated impact of a pin specimen on a rotating grinding wheel with abrasive. Results show a convex surface is formed in transition region, and its altitude reaches maximum after 6000 impacts. That effect causes the thickness loss of entire worn surface declines from 22.34 μm of 0–2000 impacts to 18.87 μm of 4000–6000 impacts. However, the convex surface is replaced by a concave surface after 9000 impacts, and it propagates to region 2 subsequently. When the θ between concave morphology near region 2 and horizontal direction is greater than 90°, impact wear resistance starts to fail, and θ will not increase until worn surface splits away off completely. In addition, the resistance behavior above will restart on new worn surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. ELSawy · Wear · 2017 · 390–391 · 11310.1016/j.wear.2017.07.007 ↗
2. Wei · Journal of Iron and Steel Research, International · 2007 · 4 · 48
3. Moonesan · Journal of Alloys and Compounds · 2012 · 520 · 22610.1016/j.jallcom.2012.01.027 ↗
4. Zhang · Efremenko Wear · 2017 · 390–391 · 13510.1016/j.wear.2017.07.017 ↗
5. Slatter · Wear · 2011 · 271 · 148110.1016/j.wear.2011.01.041 ↗
6. Cassar · A. Leyland Surface and Coatings Technology · 2012 · 206 · 264510.1016/j.surfcoat.2011.10.054 ↗
7. Jiang · Wear · 2017 · 376–377 · 193810.1016/j.wear.2017.02.035 ↗
8. Konyashin · International Journal of Refractory Metals and Hard Materials · 2018 · 71 · 35710.1016/j.ijrmhm.2017.10.021 ↗
9. Nguyen · Wear · 2018 · 396–397 · 7510.1016/j.wear.2017.11.009 ↗
10. Abbas · Eng. Fail. Anal. · 2018 · 90 · 55410.1016/j.engfailanal.2018.03.026 ↗
11. D'Addona · CIRP Journal of Manufacturing Science and Technology · 2011 · 4 · 3310.1016/j.cirpj.2011.07.003 ↗
12. Zia · Surf. Coating. Technol. · 2017 · 320 · 11810.1016/j.surfcoat.2017.01.089 ↗
13. Huang · Engineering Failure Analysis · 2017 · 80 · 27210.1016/j.engfailanal.2017.06.040 ↗
14. Kong · Surface and Coatings Technology · 2018 · 344 · 20410.1016/j.surfcoat.2018.03.027 ↗
15. Sun · Mater. Sci. Eng. · 2018 · 711 · 48410.1016/j.msea.2017.11.072 ↗
16. Kieu · Peuget Procedia Materials Science · 2014 · 7 · 26210.1016/j.mspro.2014.10.034 ↗
17. Ge · Wear · 2017 · 376–377 · 109710.1016/j.wear.2017.01.015 ↗
18. Pereira · Tribology International · 2017 · 110 · 22210.1016/j.triboint.2017.02.024 ↗
19. Zhang · J. Mater. Eng. Perform. · 2017 · 26 · 566910.1007/s11665-017-2941-y ↗
20. Zheng · Measurement · 2018 · 125 · 9910.1016/j.measurement.2018.04.078 ↗
21. Shi-guang Peng, Ren-bo Song, Ting Sun, Fu-qiang Yang, Peng Deng, Chun-jing Wu Wear, 362–363(2016) pp. 129-134.
22. Mannens · Procedia CIRP · 2018 · 71 · 16610.1016/j.procir.2018.05.091 ↗
23. Cai · Tribol. Int. · 2017 · 105 · 21910.1016/j.triboint.2016.10.002 ↗
24. Guan · Journal of alloy and compounds · 2017 · 724 · 91010.1016/j.jallcom.2017.07.091 ↗
25. He · Micron · 2018 · 109 · 5310.1016/j.micron.2018.04.001 ↗
26. Holm · Ultramicroscopy · 2018 · 195 · 1210.1016/j.ultramic.2018.06.007 ↗