article·2012-01-01

Effects of chromium,titanium and aluminum on the friction and wear properties of nitride hard coatings

Zhao Yu-qing

Abstract

A series of nitride coatings including chromium,titanium and aluminum were deposited on glass and stainless steel substrates by closed-field unbalanced magnetron sputtering.The friction coefficients were measured by tribometer and the coating wear traces were studied by the metallographic microscope.It indicates that the friction coefficients of TiN、CrN、 TiAlN、CrAlN and CrTiAlN coatings decrease sequentially,while the wear resistances are enhanced.According to the X-ray photoelectron spectroscopy analysis aluminum nitride can be indentified in the nitride coatings with Al,which enhance the coating hardness and wear resistance.Chrome oxide can be found in the nitride coatings with Cr,which enhance the self-chip removal ability and decrease the friction coefficients of the coatings;titanium oxide existing in the coatings is not good for the friction and wear properties of the coatings.Chromium titanium aluminum nitride is naturally of higher hardness than the ternary nitride,as well as incorporated with chromium and aluminum,which make it the best coating with low friction coefficient and good wear resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.