Effects of process parameters on the properties of W-doped In_2O_3 transparent conductive thin films prepared by dc magnetron sputtering
Source abstract
Abstract
W-doped In2O3(IWO) thin films were prepared by dc magnetron sputtering from a tungsten-embedded metallic target.The dependence of the structure,surface morphology and electrical/optical properties of the films on the various process parameters during preparation was investigated.The XRD patterns revealed that the crystallinity of the films is improved with the increasing substrate temperature,and AFM results showed that the film surface is smooth with uniformly distributed grains.The electrical properties are highly sensitive to the process parameters.The average transmission in the visible range from 400 to 700nm for all samples deposited at the substrate temperature 380℃ is over 80%.It was found from a typical sample that the resistivity is 2.8 × 10-4ohm.cm,carrier mobility 49cm2V-1s-1,carrier concentration 4.4 × 1020cm-3 and average transmission 83%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.