Development of fast response freezing valve for liquid lithium application in tokamak
Source abstract
Abstract
Abstract Liquid lithium has bright prospect for plasma facing material and coolant application in fusion experimental devices. To improve the safety performance of liquid lithium system, valve is necessary to be applied in the circuit and will be installed in the vacuum vessel. A compact structure of freezing valve, which can be operated under high vacuum, high magnetic field and high temperature (180 °C–320 °C) was designed and manufactured. The cooling performances of the freezing valve under different cooling water velocities were simulated and according to the simulation results, its response time under 2 m/s cooling water was about 3 s. The performances of the freezing valve like freezing time, thermal affected area and heating capability were tested on the test bench. Based on the experiment results, the response time was about 5 s. The thermal affected area was very limited and the heating capability of the heater was enough for the freezing valve normal operation. Through preliminary thermal shock test, the thermal fatigue resistance of the brazing joints was tested and the joints were characterized by metallographic experiment, which indicated that the structure of the valve was stable under 25 times of thermal shock tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Superconducting Materials and Applications · Magnetic confinement fusion research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Effects of large area liquid lithium limiters on spherical torus plasmas10.1016/j.jnucmat.2004.10.019 ↗
2. Plasma-wall interaction and plasma behavior in fusion devices with liquid lithium plasma facing components10.1016/j.jnucmat.2009.01.228 ↗
3. Evaporated lithium surface coatings in NSTX10.1016/j.jnucmat.2009.01.262 ↗
4. The effect of lithium surface coatings on plasma performance in the National Spherical Torus Experiment10.1063/1.2906260 ↗
5. Monte Carlo calculation for various enrichment lithium coolant using different data libraries in a hybrid reactor10.1016/j.enconman.2007.09.028 ↗
6. Li-CPS limiter in tokamak T-11M10.1016/S0920-3796(03)00018-8 ↗
7. Liquid lithium divertor system for fusion reactor10.1016/j.fusengdes.2009.02.002 ↗
8. Liquid metal magnetohydrodynamic flows in manifolds of dual coolant lead lithium blankets10.1016/j.fusengdes.2014.03.004 ↗
9. Analytical study of the effect of natural convection on cryogenic pipe freezing, Int10.1016/S0017-9310(97)00269-X ↗
10. Design and Analysis of Fast Response Freezing Valve for EAST Liquid Lithium Limiter Loop10.1007/s10894-014-9671-z ↗
11. Recent liquid lithium limiter experiments in CDX-U10.1088/0029-5515/45/6/014 ↗
12. First results of flowing liquid lithium limiter in HT-710.1088/0031-8949/2014/T159/014033 ↗
13. Development of fabrication technology and investigation of properties of steel-to-bronze joints suggested for ITER HHF components10.1016/j.jnucmat.2008.12.240 ↗
14. Transient freezing of liquids in forced flow inside convectively cooled tubes10.1016/j.icheatmasstransfer.2008.01.012 ↗
15. Accelerated pipe freezing in non-circular sections10.1205/026387603765173727 ↗
16. Mathematical simulation of the freezing time of water in small diameter pipes10.1016/j.applthermaleng.2014.07.046 ↗
17. ITER standard document, ITER Practice for Replaceable Non-metallic Windows Existing Practices Document, ITER_D_ 2WBW2V
18. Thermal cyclic test of alumina/kovar joint brazed by Ni–Ti active filler10.1016/S0272-8842(02)00081-0 ↗
19. Bonding of zirconia to super alloy with the active brazing technique10.1016/S0955-2219(00)00162-X ↗
20. Influence of high flux hydrogen-plasma exposure on the thermal shock induced crack formation in tungsten10.1016/j.jnucmat.2011.09.035 ↗