Modelling of the alkali vapour-pressure dynamics during the epitaxial growth of semi-transparent photo-emissive layers
Source abstract
Abstract
Abstract The improvement of the red response and the increase in the stability of semi-transparent multi-alkali Na2KSb(Cs,Sb) photocathodes depend on the thickness and crystallinity of the processed bi-alkali Na2KSb base layers. The epitaxially grown quasi-monocrystal base layers are processed at elevated temperatures by repeating evaporations of antimony in the presence of sodium and potassium vapours, respectively. The alkali vapour-pressure variations in the forming well are controlled using a Langmuir gauge. Mathematical modelling of the alkali vapour-pressure dynamics by solving a standard second-order differential equation enables the study of the construction (volume, geometric inner surface area and conductance of the forming well), the preparation (true inner surface area, sticking coefficient and activation energy for desorption of the alkali atoms on the inner surface of the forming well) and the process parameters (the alkali vapour temperature and the temperature of the inner surface of the forming well) influencing the time constant of establishing an operating alkali vapour pressure when the rate of addition chemical reactions depends on the rate of antimony evaporation. In this paper, a comparison between the measured and the calculated potassium vapour-pressure changes within a 1×10−4 mbar pressure range during the course of K+Sb steps is presented. Each step takes place at 200°C by evaporating small quantities of antimony in the presence of potassium vapour, until a maximum in the photo response against white light is achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photocathodes and Microchannel Plates · Radiation Detection and Scintillator Technologies · Dark Matter and Cosmic Phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (7)
Show source-provided references
1. Erjavec · Mater Technol · 2000 · 34 · 437
2. Erjavec · Vacuum · 2001 · 64 · 1510.1016/S0042-207X(01)00366-9 ↗
3. Hobson · J Vac Sci Technol · 1967 · 4 · 25710.1116/1.1492554 ↗
4. Hellier · Vuoto · 1972 · 5 · 138
5. Jeric̆ · Vacuum · 1960 · 10 · 23410.1016/0042-207X(60)90144-5 ↗
6. Dolizy · Philips Tech Rev · 1982 · 40 · 19
7. Erjavec · Thin Solid Films · 1997 · 303 · 410.1016/S0040-6090(97)00082-5 ↗