Cleaning of thin passivation layers on Ag contact material by vacuum outgassing
Source abstract
Abstract
Metallic silver is a relatively soft material and a good electric conductor. Therefore, it is a very suitable material for electrical contacts. However, because silver is not resistant to an atmosphere containing H 2 S, SO 2 and Cl 2 , the surface of the silver contact material must be protected. The well-known surface protection method using a thin gold layer is too expensive to be economical. In our study we considered some cheaper passivation thin layers which could prevent the corrosive effects of the environment and, at the same time, assure good electric contact. We chose three different types of passivation thin layers. The first one was deposited by waxing in Silverbrite solution, for the second layer chromizing was used while the titanium nitride layer was deposited by sputtering. The contact material used was AgNi 0.15 . Besides the electrical properties of the material, its clean surface is very important to achieve good electric contact and low level of contact resistance. In the high-vacuum outgassing equipment designed and developed in our laboratory samples of silver contact material were outgassed for 48 h in high vacuum (1 x 10 -7 mbar) at 200°C. Analysis of the outgassed substances with a quadrupole mass spectrometer showed that the outgassing rates of all the three passivation layers were low while the composition depended on the type of the layer. The resulting thin layers were analyzed with the Auger electron spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical Contact Performance and Analysis · Electronic Packaging and Soldering Technologies · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Wutz · 1989
2. Koller · Vacuum · 1995 · 46 · 82710.1016/0042-207X(95)00049-6 ↗
3. Koller · Kovine, zlitine, tehnologije · 1995 · 29 · 515
4. Holm · 1967
5. Bizjak M, Koller L, Požun K, Leskovšek J. ICEC'98 Offenbach, Dusseldorf: VDE-Verlag, 1998. p. 47.
6. Chawla · J Electrochem Soc · 1990 · 137
7. Schirnikat · F & M · 1996 · 104 · 515
8. Doduco Datenbuch 2. Aufl. Pforzheim, 7, 1997.
9. Navodilo za uporabo Chromating AG-797100. Kemična tovarna Podnart.
10. Navinšek · Surface and Coating Technology · 1998 · 98 · 80910.1016/S0257-8972(97)00316-2 ↗
11. Koller · Kovine, zlitine, tehnologije · 1999 · 32 · 155
12. Praček · Kovine, zlitine, tehnologije · 1996 · 30 · 53