journal article·2014-09

InOx thin films deposited by plasma assisted evaporation: Application in light shutters

E.G. Merino, G. Lavareda, P. Brogueira, A. Amaral, C. Nunes de Carvalho, P.L. Almeida

Vacuum· Volume 107
Publisher page

Abstract

Abstract An integration of undoped InO x and commercial ITO thin films into laboratory assembled light shutter devices is made. Accordingly, undoped transparent conductive InO x thin films, about 100 nm thick, are deposited by radiofrequency plasma enhanced reactive thermal evaporation (rf-PERTE) of indium teardrops with no intentional heating of the glass substrates. The process of deposition occurs at very low deposition rates (0.1–0.3 nm/s) to establish an optimized reaction between the oxygen plasma and the metal vapor. These films show the following main characteristics: transparency of 87% (wavelength, λ = 632.8 nm) and sheet resistance of 52 Ω/sq; while on commercial ITO films the transparency was of 92% and sheet resistance of 83 Ω/sq. The InO x thin film surface characterized by AFM shows a uniform grain texture with a root mean square surface roughness of Rq∼2.276 nm. In contrast, commercial ITO topography is characterized by two regions: one smoother with Rq∼0.973 nm and one with big grains (Rq∼3.617 nm). For the shutters assembled using commercial ITO, the light transmission coefficient (Tr) reaches the highest value (Tr max ) of 89% and the lowest (Tr min ) of 1.3% [13] , while for the InO x shutters these values are 80.1% and 3.2%, respectively. Regarding the electric field required to achieve 90% of the maximum transmission in the ON state ( E on ), the one presented by the devices assembled with commercial ITO coated glasses is 2.41 V/μm while the one presented by the devices assembled with InO x coated glasses is smaller, 1.77 V/μm. These results corroborate the device quality that depends on the base materials and fabrication process used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · GaN-based semiconductor devices and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Kiriakidis · Vacuum · 2012 · 86 · 49510.1016/j.vacuum.2011.10.013 ↗
2. Herrero · Thin Solid Films · 2004 · 451 · 63010.1016/j.tsf.2003.11.050 ↗
3. Minami · Thin Solid Films · 2003 · 445 · 26810.1016/S0040-6090(03)01159-3 ↗
4. Wang · Thin Solid Films · 2007 · 515 · 292110.1016/j.tsf.2006.08.030 ↗
5. Al-Ajili · Thin Solid Films · 1997 · 305 · 11610.1016/S0040-6090(96)09584-3 ↗
6. Nakashima · Vacuum · 2002 · 66 · 22110.1016/S0042-207X(02)00145-8 ↗
7. ElRhaled · Appl Surf Sci · 2002 · 201 · 13810.1016/S0169-4332(02)00656-6 ↗
8. Asenjo · J Phys Chem Solids · 2010 · 71 · 162910.1016/j.jpcs.2010.09.011 ↗
9. Fergason · SID Int Symp Dig Tech Pap · 1985 · 16 · 68
10. Doane · Appl Phys Lett · 1986 · 48 · 26910.1063/1.96577 ↗
11. Wu · Liq Cryst · 1989 · 5 · 145310.1080/02678298908027783 ↗
12. Craighead · Appl Phys Lett · 1982 · 40 · 2210.1063/1.92904 ↗
13. Almeida · Appl Phys Lett · 2009 · 95 · 04350110.1063/1.3186640 ↗
14. Nunes de Carvalho · J Non-Cryst Solids · 2008 · 354 · 164310.1016/j.jnoncrysol.2007.10.004 ↗
15. Amaral · Thin Solid Films · 2012 · 526 · 22110.1016/j.tsf.2012.11.019 ↗
16. Malathy · J Non-Crystalline Solids · 2009 · 355 · 150810.1016/j.jnoncrysol.2009.04.043 ↗
17. Yu · Opt Commun · 2006 · 259 · 18710.1016/j.optcom.2005.08.053 ↗