journal article·2008-08

A growth rate, structure and surface morphology study of Si1-x-yGexCy films deposited by ArF-LCVD in tilted geometry

E. López, S. Chiussi, U. Kosch, P. González, J. Serra, C. Serra, B. León

Vacuum· Volume 82· Issue 12
Publisher page

Abstract

Abstract Ge, SiGe, SiC and SiGeC films were grown by ArF-Excimer laser induced chemical vapor deposition. The results demonstrate that in ArF-LCVD a fine and effective control of both the deposition rate, film properties and surface morphology is possible without altering the gas composition and pressure, by changing exclusively the distance between laser beam and substrate surface or by the fact of irradiating or not the films. Different distances have been achieved by tilting the sample 30° with respect to the beam, a geometry simultaneously producing both, an irradiated and a no irradiated zone in the same film. The extensive characterisation of these films was carried out through different techniques in order to see the influence of the irradiation geometry on composition, microstructure and roughness. The evaluation of the deposition rate and the XPS results revealed different growth rate behaviour along the film without considerable variations in composition. AFM proved the small roughness of the films and its strong dependence on the laser beam to substrate distance. Raman spectroscopy and XRD were used to determine the main structural properties. Additional information about surface morphology was also obtained through SEM. For pure Ge, some more studies have been performed due to the tendency of these films to show significant changes, especially in growth rate and roughness, both when the laser irradiated the samples and when temperature, pressure and laser power were varied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Surface Roughness and Optical Measurements · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Kanicki · 1991
2. Eberl · Appl Phys Lett · 1992 · 60 · 303310.1063/1.106774 ↗
3. Soref · J Appl Phys · 1991 · 70 · 247010.1063/1.349403 ↗
4. López · Appl Surf Sci · 2003 · 208 · 68210.1016/S0169-4332(02)01426-5 ↗
5. Chiussi · Appl Surf Sci · 1996 · 106 · 7510.1016/S0169-4332(96)00441-2 ↗
6. Dietrich · Appl Phys · 1989 · A 48 · 40510.1007/BF00619710 ↗
7. Lowndes · Appl Phys Lett · 1988 · 52 · 186810.1063/1.99732 ↗
8. Dischler · J Appl Phys · 1990 · 68 · 123710.1063/1.346724 ↗
9. Noda · J Mat Sci · 1993 · 28 · 276310.1007/BF00356215 ↗
10. Suzuki · Jpn J Appl Phys · 1993 · 32 · 356610.1143/JJAP.32.3566 ↗
11. López · Appl Surf Sci · 2005 · 248 · 10810.1016/j.apsusc.2005.03.091 ↗
12. López · Appl Surf Sci · 2005 · 248 · 11310.1016/j.apsusc.2005.03.011 ↗
13. Kitahama · Appl Phys Lett · 1986 · 49 · 63410.1063/1.97063 ↗
14. Kitahama · Mat Res Soc Symp Proc · 1987 · 75 · 30910.1557/PROC-75-309 ↗
15. Szörenyi · Thin Solid Films · 1994 · 241 · 8010.1016/0040-6090(94)90401-4 ↗
16. Chiussi · Appl Surf Sci · 2003 · 208–209 · 35810.1016/S0169-4332(02)01399-5 ↗
17. Frangis · Appl Phys Lett · 1998 · 72 · 287710.1063/1.121487 ↗
18. Hesch · Appl Surf Sci · 1990 · 46 · 23310.1016/0169-4332(90)90149-T ↗
19. Hall · J Electrochem Soc · 1972 · 119 · 159310.1149/1.2404049 ↗
20. Evrard · Thin Solid films · 1992 · 222 · 7310.1016/0040-6090(92)90041-9 ↗
21. Solis · J Appl Phys · 1997 · 82 · 23610.1063/1.365803 ↗