journal article·2008-06

Mass production of thick copper vacuum metalization on plastic parts

Martin Andritschky, Kaj Pischow

Vacuum· Volume 82· Issue 11
Publisher page

Abstract

Abstract ESD/EMI shielding coatings based on Cu layers on plastic can be produced very effectively by sputtering. Certain principles have to be followed to obtain an adequate result in mass production. Coating speed (productivity), outgassing and plastic thickness are factors, which are interrelated. The correlation between these three factors will influence the final product, a metal coating with a defined resistance between two measuring points. Typical values for these factors were sputtering at an Ar partial pressure of 1.1 × 10 −3 mbar to produce a Cu layer with a specific resistivity of about 1.5 × 10 −7 Ωm at a production speed of one plastic part/s. The plastic temperature due to the heating intrinsic to sputter deposition of metals, reached about 84 °C at the thinnest areas of the plastic substrate. Coating adhesion does not take part of the correlation of production conditions and achieved coating quality and production speed. Sputter deposition will produce a well adherent Cu coating on almost any clean plastic material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrostatic Discharge in Electronics · Electronic Packaging and Soldering Technologies · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Pargellis · J Vac Sci Technol · 1989 · A7 · 2710.1116/1.575762 ↗
2. Andritschky · Vacuum · 1993 · 44 · 80910.1016/0042-207X(93)90312-X ↗
3. Grünwald · Surf Coat Technol · 1999 · 111 · 28710.1016/S0257-8972(98)00718-X ↗
4. Kuchling · 1988
5. Elsley · Vacuum · 1975 · 299–306 · 34710.1016/0042-207X(75)91653-X ↗
6. EMI/RFI: Materials and Technologies Pub Time: 2007/06, Published by: BCC Research, Distributed by: Global Information, Inc.
7. Holland · Vacuum · 1965 · 15 · 30110.1016/0042-207X(65)90897-3 ↗