journal article·2022-03

The effect of low-temperature auto-ignition of W–Cu2O nanopowders with core-shell structure

M.G. Krinitcyn, N.V. Svarovskaya, M.I. Lerner

Vacuum· Volume 197
Publisher page

Abstract

In this work, the effect of in-vacuum low-temperature auto-ignition of a W–Cu2O nanopowders mixture obtained by natural oxidation of W–Cu composite nanopowders is demonstrated. The powder is obtained via electrical explosion of wire technique and consists of bimetallic particles instead of Cu and W mixture. The evolution of the phase composition has been studied using in situ X-ray diffraction technology during heating. The structural investigation shows that particles have a core-shell structure, increasing a contact surface between reactants. The ongoing reactions are described, and studies of the structure of powders and combustion products are given. Combustion occurs in the solid-phase temperature range, which is confirmed by the thermal imaging data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Vacuum and Plasma Arcs

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Interface and layer periodicity effects on the thermal conductivity of copper-based nanomultilayers with tungsten, tantalum, and tantalum nitride diffusion barriers10.1063/5.0019907 ↗
2. The effect of interface stress on the grain boundary grooving in nanomaterials: application to the thermal degradation of Cu/W nano-multilayers10.1016/j.scriptamat.2021.113866 ↗
3. Synthesis and processing techniques of tungsten copper composite powders for electrical contact materials (A Review)10.13005/ojc/350201 ↗
4. W–Cu composites with submicron-and nanostructures: progress and challenges10.1038/s41427-019-0179-x ↗
5. Interface diffusion and mechanical properties of ODS-W/Cu prepared by spark plasma sintering10.1016/j.vacuum.2021.110278 ↗
6. Microstructural investigation after vacuum electrical breakdown of the W-30wt.% Cu contact material10.1016/j.vacuum.2018.01.004 ↗
7. Achieving both high conductivity and reliable high strength for W–Cu composite alloys using spherical initial powders10.1016/j.vacuum.2020.109620 ↗
8. Microstructure and properties of W-25 wt% Cu composites reinforced with tungsten carbide produced by an in situ reaction10.1016/j.vacuum.2020.109423 ↗
9. Massalski · 1990 · 843
10. Hierarchical nanostructured W-Cu composite with outstanding hardness and wear resistance10.1088/1361-6528/ab548f ↗
11. Sintering behavior of molybdenum-copper and tungsten-copper alloys by using ultrafine molybdenum and tungsten powders as raw materials10.1016/j.ijrmhm.2020.105194 ↗
12. Fabrication of W-Cu functionally graded composites using high energy ball milling and spark plasma sintering for plasma facing components10.1016/j.apt.2020.07.015 ↗
13. Tungsten–copper composite production by activated sintering and infiltration10.1016/j.ijrmhm.2011.03.009 ↗
14. A feasibility study of W-Cu composites production by high pressure compression of tungsten powder10.1016/j.ijrmhm.2010.09.002 ↗
15. Effects of milling time and sintering temperature on structural evolution, densification behavior and properties of a W-20wt.% Cu alloy10.1016/j.jallcom.2017.10.081 ↗
16. Fabrication of fine-grained W-Cu composites with high hardness10.1016/j.jallcom.2018.06.338 ↗
17. The influence of the dispersion technique on the characteristics of the W–Cu powders and on the sintering behavior10.1016/S0032-5910(03)00123-2 ↗
18. Effects of processing parameters of tungsten–copper composites10.1016/j.ijrmhm.2012.02.015 ↗
19. The influence of pre-sintering temperature on the microstructure and properties of infiltrated ultrafine-grained tungsten-copper composites10.1016/j.jallcom.2020.153761 ↗
20. Effect of heating rate on microstructural homogeneity of sintered W–15wt% Cu nanocomposite fabricated from W–CuO powder mixture10.1016/j.scriptamat.2004.06.014 ↗
21. Sinter densification of nanocrystalline composite W-Cu powder
22. A comparative study of thermal kinetics and combustion performance of Al/CuO, Al/Fe2O3 and Al/MnO2 nanothermites10.1016/j.vacuum.2020.109339 ↗
23. Exothermic reactions in Al–CuO nanocomposites10.1016/j.tca.2006.09.002 ↗
24. Interfacial failure mechanism in tungsten fiber reinforced copper-based composites fabricated by combustion synthesis melt infiltration under ultra-high gravity10.1016/j.matdes.2015.08.115 ↗
25. In situ X-ray diffraction investigations during high-energy oxygen ion implantation in transition metals10.1016/j.vacuum.2004.07.056 ↗
26. Laboratory X-ray diffraction complex for in situ investigations of structural phase evolution of materials under gaseous atmosphere10.3390/met10040447 ↗
27. Zirconium phase transformations observed by “in-situ” XRD analysis10.1016/j.vacuum.2011.07.009 ↗
28. Powder and wire melting of titanium alloys by electron beam10.1016/j.promfg.2019.12.092 ↗
29. β-Tungsten'as a tungsten oxide10.1107/S0365110X54000989 ↗
30. Cu/Cu2O/CuO nanoparticles: novel synthesis by exploding wire technique and extensive characterization10.1016/j.apsusc.2016.09.005 ↗
31. Unravelling oxygen driven α to β phase transformation in tungsten10.1038/s41598-020-71650-2 ↗
32. Plasma expansion synthesis of tungsten nanopowder10.1016/j.jallcom.2017.07.207 ↗
33. Surface oxidation and reduction of CuO and Cu2O studied using XPS and XAES10.1002/(SICI)1096-9918(199611)24:12<811::AID-SIA191>3.0.CO;2-Z ↗
34. Interaction of tungsten nanopowders with air under different conditions10.1016/j.scriptamat.2004.10.029 ↗
35. Features of passivation, oxidation and combustion of tungsten nanopowders by air10.1016/j.ijrmhm.2004.06.005 ↗
36. Oxygen-deficient tungsten oxides
37. Preparation of mono-dispersed, high energy release, core-shell structure Al nanopowders and their application in HTPB propellant as combustion enhancers
38. Non-isothermal oxidation of aluminum nanopowder coated by hydrocarbons and fluorohydrocarbons10.1016/j.apsusc.2013.01.197 ↗
39. Energy release prediction and structure characterization of nano aluminum powder in situ coated by polyethylene glycol10.1080/00150193.2020.1760620 ↗
40. Preparation of WCu composite powders by sol-gel method and their reduction behavior
41. Preparation of W–Cu nanocomposite powder by hydrogen-reduction of ball-milled W and CuO powder mixture10.1016/j.matlet.2003.08.035 ↗
42. Processing of tungsten/copper materials from W–CuO powder mixtures10.1016/j.msea.2007.01.089 ↗
43. Thermodynamic consideration and phase evolution during oxidation of tungsten–copper electrical contactor scraps10.3103/S1067821216040039 ↗
44. The OW (oxygen-tungsten) system10.1007/BF02877593 ↗