journal article·2020-11

Improvement of vacuum maintenance capability and output pulse limit in a hard-tube MILO with a carbon fiber array cathode

An-Kun Li, Yu-Wei Fan, Bao-Liang Qian, Song Li, Han-Wu Yang

Vacuum· Volume 181
Publisher page

Abstract

Abstract This paper reports a great improvement of vacuum maintenance capability in a hard-tube magnetically insulated transmission line oscillator (MILO) by replacing traditional polymer velvet cathode with a low-outgassing carbon fiber array cathode. Based on this improvement, we tested and compared the output pulse limits of this hard-tube MILO with the two cathodes under the same conditions, without an external pumping system after base vacuum pressure was reached. Experimental results reveal that the acceptable pressure for MILO operation is about 1.7 Pa, which is about 100 times higher than the conventional vacuum level (~10−2 Pa). Moreover, the output pulse limit of this hard-tube MILO has been increased from 7 pluses with polymer velvet cathode to about 127 pulses with carbon fiber array cathode. This promotion in the output pulse limit will speed up the application process of MILO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gyrotron and Vacuum Electronics Research · Pulsed Power Technology Applications · Lightning and Electromagnetic Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Experimental demonstration of a tunable load-limited magnetically insulated transmission line oscillator10.1109/TED.2016.2518744 ↗
2. A high-efficiency repetitively pulsed magnetically insulated transmission line oscillator10.1016/j.vacuum.2016.03.006 ↗
3. A dielectric-filled magnetically insulated transmission line oscillator10.1063/1.4913932 ↗
4. Vacuum requirements in high power microwave tubes10.1016/0042-207X(95)00039-9 ↗
5. Benford · 2007
6. Evolution of pulse shortening research in narrow band, high power microwave sources10.1109/27.700749 ↗
7. Outgassing rate analysis of a velvet cathode and a carbon fiber cathode10.1063/1.4996649 ↗
8. Gas evolution during operation of a CsI-coated carbon fiber cathode in a closed vacuum system10.1109/TPS.2005.844593 ↗
9. Effects of vacuum pressures on the performance of a velvet cathode under repetitive high-current pulse discharges10.1016/j.vacuum.2010.07.004 ↗
10. Effects of anode materials on the performance of explosive field emission diodes10.1109/TPS.2002.802146 ↗
11. Review of cold cathode research at the air force research laboratory10.1109/TPS.2008.926227 ↗
12. Investigation of a 1.2-GHz magnetically insulated transmission line oscillator10.1109/TPS.2010.2086492 ↗
13. The tapered MILO10.1109/27.700810 ↗
14. Plasma sources for high-current electron beam generation10.1063/1.1345503 ↗
15. Pulsed plasma electron sources10.1063/1.3085797 ↗
16. Characterization of the plasma on dielectric fiber (velvet) cathodes10.1063/1.2126788 ↗
17. Emission properties of different cathodes at e≤105 V/cm10.1063/1.1337924 ↗
18. Experimental results of a high power rep-rate velvet cathode
19. A long-pulse repetitive operation magnetically insulated transmission line oscillator10.1063/1.4876599 ↗
20. Compact coaxial diode electron beam system: carbon cathodes and anode fabrication techniques10.1063/1.1136311 ↗
21. Field emission cathodes using commercial carbon fibers10.1063/1.1137097 ↗
22. A series of tufted carbon fiber cathodes designed for different high power microwave sources10.1063/1.2936870 ↗
23. Plasma characterization in a diode with a carbon-fiber cathode10.1063/1.2976136 ↗
24. Improved long-term electrical stability of pulsed high-power diodes using dense carbon fiber velvet cathodes10.1063/1.4739238 ↗
25. High-current carbon-epoxy capillary cathode10.1109/TPS.2014.2313293 ↗
26. Long pulse CsI impregnated field emission cathodes10.1063/1.1141112 ↗
27. Novel cathode for field-emission applications10.1063/1.1146504 ↗
28. Long pulse electron beams produced from carbon fiber cathodes
29. Cathode testing at the air force research laboratory
30. Comparison of velvet- and cesium iodide-coated carbon fiber cathodes10.1109/27.928942 ↗
31. Intense electron emission from carbon fiber cathodes10.1007/s100530170150 ↗
32. Carbon velvet field-emission cathode10.1063/1.1516853 ↗
33. Fabrication of carbon-fiber cathode for high-power microwave applications10.1109/TPS.2004.832518 ↗
34. Performance testing of a carbon fiber array cathode in a hard-tube MILO10.1063/1.4996416 ↗
35. A low-outgassing-rate carbon fiber array cathode
36. Performance improvement of a magnetically insulated transmission line oscillator with a carbon fiber array cathode
37. Recent results in the hard-tube MILO experiment
38. Maintenance of high vacuum level in a compact and lightweight sealed hard-tube magnetically insulated line oscillator system10.1016/j.vacuum.2014.09.019 ↗
39. Conditioning of carbon fiber cathodes in UHV-sealed tubes at 200 A/cm210.1109/TPS.2014.2329878 ↗
40. Emission behavior of three conditioned carbon fiber cathode types in UHV-sealed tubes at 200 A/cm210.1109/TPS.2014.2363462 ↗
41. Evaluating the performance of a carbon-epoxy capillary cathode and carbon fiber cathode in a sealed-tube vircator under UHV conditions10.1109/TPS.2015.2439680 ↗
42. Investigation on adjustable magnetic pulse compressor in power supply system10.1109/TPEL.2018.2830106 ↗
43. Investigation on a fast rise time high voltage pulse transformer10.1063/1.5124981 ↗
44. Preliminary experimental study of a carbon fiber array cathode10.1063/1.4960699 ↗
45. Theory of ion acceleration by drifting intense relativistic electron beams. I. Theory10.1063/1.861174 ↗
46. Theory of ion acceleration by drifting intense relativistic electron beams. II. Comparison with experiments10.1063/1.861175 ↗