journal article·2020-07

Wetting of monocrystalline silicon (100) surface by Sn-xAl (x = 0, 2.4 and 50 at.%) alloys and Al at 900 °C

Qiaoli Lin, Jianbin Wang, Ran Sui, Lu Liu, Hui Li

Vacuum· Volume 177
Publisher page

Abstract

Abstract The wetting of monocrystalline Si by molten Sn-xAl (x = 0, 2.4 and 50 at.%) and pure Al was studied by using the modified sessile drop method at 900 °C under a high vacuum. The results showed that the segregation of Al at the solid/liquid interface intensified the dissolution of Si substrate in the Sn-xAl/Si system. In the Al/Si system, the formation of crater has certain hindrance to the spreading, and it is related to the Marangoni convection, which was caused by solute concentration gradient in the inner of drop. The effect of dissolution on wetting should consider the dissolution induced the evolution of interfacial morphology, and the dissolution only in the specific range of degrees that can act as a driving force for spreading. Generally, the spreading in this study were limited by the viscous dissipation. In Sn-xAl/Si system, the spreading was first controlled by the diffusion of Al from inner drop to the triple line, and then limited by the viscous dissipation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Aluminum Alloy Microstructure Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Si-film growth using liquid phase epitaxy method and its application to thin-film crystalline Si solar cell10.1016/S0927-0248(00)00136-7 ↗
2. High-quality multi-crystalline silicon (mc-Si) grown by directional solidification using notched crucibles10.1016/j.jcrysgro.2010.10.090 ↗
3. The application of temperature gradient zone melting to silicon wafer processing10.1149/1.2127216 ↗
4. Thermodynamics and kinetics of dissolutive wetting of Si by liquid Cu10.1016/j.actamat.2010.06.038 ↗
5. Non-reactive versus dissolutive wetting of Ag–Cu alloys on Cu substrates10.1007/s10853-009-3924-7 ↗
6. Evolution of the interfacial shape in dissolutive wetting: coupling of wetting and dissolution10.1016/j.ijheatmasstransfer.2017.10.109 ↗
7. Modeling reactive wetting10.1016/S1359-6454(97)00487-4 ↗
8. Wetting phenomena for liquid Cu and Cu alloys on Fe-base substrate10.1016/j.apt.2016.05.004 ↗
9. Reactive wetting of metallic plated steels by liquid sodium10.1080/18811248.2011.9711725 ↗
10. Wettability of molten Sn-Bi-Cu solder on Cu substrate10.1016/j.matlet.2009.06.052 ↗
11. Dynamics of dissolutive wetting: a molecular dynamics study10.1021/acs.langmuir.7b01154 ↗
12. Dewetting kinetics of metallic liquid films: competition between unbalanced Young's force and dissolutive reaction10.1016/j.cplett.2017.09.009 ↗
13. Modeling dissolution and spreading of Bi–Sn alloy drops on a Bi substrate10.1016/j.actamat.2009.03.015 ↗
14. Dissolutive wetting and spreading phenomena between Al2O3 substrate and CaO-Al2O3 liquid slags10.1007/s11663-016-0587-z ↗
15. Eustathopoulos · 1999
16. Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation10.1016/j.matdes.2019.107945 ↗
17. Design of TiCx nanoparticles and their morphology manipulating mechanisms by stoichiometric ratios: experiment and first-principle calculation10.1016/j.matdes.2019.107951 ↗
18. Nanoparticulate dispersion, microstructure refinement and strengthening mechanisms in Ni-coated SiCp/Al-Cu nanocomposites10.1016/j.msea.2019.138092 ↗
19. Processing, multiscale microstructure refinement and mechanical property enhancement of hypoeutectic Al–Si alloys via in situ bimodal-sized TiB2 particles10.1016/j.msea.2020.139081 ↗
20. A new approach for improving the elevated-temperature strength and ductility of Al–Cu–Mg–Si alloys with minor amounts of dual-phased submicron/nanosized TiB2–TiC particles10.1016/j.msea.2019.138266 ↗
21. The effect and mechanism of alloying elements on Al/SiC interfacial reaction in Al melt
22. Wetting of TiC by molten Al at 1123-1323 K10.1016/j.actamat.2010.11.055 ↗
23. Hole trapping in SiO2 films annealed in low-pressure oxygen atmosphere10.1063/1.339702 ↗
24. High-temperature SiO2 decomposition at the SiO2/Si interface10.1103/PhysRevLett.55.2332 ↗
25. Wetting of monocrystalline silicon (100) surface by Sn0.3Ag0.7Cu-xTi(x=1 and 3wt%) alloys at 800–900°C10.1016/j.microrel.2019.113551 ↗
26. Barin · 1995
27. Wetting and interfacial phenomena in Ni–HfB2 systems10.1016/j.actamat.2008.09.016 ↗
28. Massalski · 1996
29. Mondolfo · 2013
30. Segregation behavior of iron in metallurgical grade silicon during SiCu solvent refining10.1016/j.vacuum.2016.04.013 ↗
31. Effect of Zr addition on B-removal behaviour during solidification purification of Si with Si–Sn solvent10.1016/j.vacuum.2019.06.029 ↗
32. Gale · 1998
33. Surface tension of binary Al–Si liquid alloys10.1007/s10853-015-8883-6 ↗
34. Dissolutive wetting in the Bi–Sn system10.1016/j.actamat.2006.03.032 ↗
35. The physics of moving wetting lines10.1016/j.jcis.2006.03.051 ↗
36. Kinetics of diffusion-limited spreading of sessile drops in reactive wetting10.1016/S1359-6462(96)00431-9 ↗
37. Dynamics of dissolutive wetting: physical mechanics investigation (in Chinese)10.1360/N972018-00588 ↗