A 3D-printed miniature magnetron gauge for ultra-high vacuum environments
Source abstract
Abstract
Abstract Miniaturized magnetron gauges are necessary for monitoring vacuum level in miniature vacuum chambers. This paper addresses the challenges of designing the magnetron cavity and configuring the electric and magnetic fields within it while meeting the contradictory constraints of small size and high vacuum level that make electron confinement and accumulation difficult. The resulting gauge has an internal volume of 0.3 cm3 and is designed for and fabricated by advanced 3D printing – including direct metal laser sintering of 316 L stainless steel. Additionally, it is capable of directly attaching to a standard vacuum electrical feedthrough. A particle tracing simulation is used to assess the electron confinement for a range of operating conditions. Experimental characterization shows that the operating pressures extend from 10 nTorr (1.33 μPa) to 1 mTorr (133 mPa). The gauge current is repeatable over the characterized pressures at various values of supply source voltage, VS, from −1000 V to −2500 V, and ranges from ≈1 nA to ≈100 μA over these pressures and voltages. The effects of VS and pressure are examined and compared to prior work. This gauge is at least 30× smaller than commercially available magnetron gauges (e.g., a typical inverted magnetron transducer has an internal volume of 15 cm3).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · High voltage insulation and dielectric phenomena · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. A micromachined Pirani gauge with dual heat sinks10.1109/TADVP.2005.858316 ↗
2. Miniaturized vacuum gauges10.1116/1.1642649 ↗
3. Pressure measurement from 1 atm to 0.01 Pa using a quartz oscillator10.1016/0042-207X(93)90109-N ↗
4. Comparison of hot cathode and cold cathode ionization gauges10.1116/1.577439 ↗
5. Compact wide-range cold-cathode gauges10.1116/1.582479 ↗
6. Extension of the low pressure range of the ionization gauge10.1063/1.1745653 ↗
7. Total pressure measurements below 10-10 torr with non-magnetic ionization gauges10.1088/0508-3443/16/10/319 ↗
8. The effects of adsorbed oxygen on measurements with ionization gauges10.1016/0042-207X(63)90859-5 ↗
9. Modulated Bayard-Alpert gauge10.1063/1.1716973 ↗
10. Hot-cathode magnetron ionization gauge for the measurement of ultrahigh Vacua10.1063/1.1736019 ↗
11. The magnetron gauge: a cold-cathode vacuum gauge10.1139/p59-144 ↗
12. Sub-Torr chip-scale sputter-ion pump based on a penning cell array Architecture10.1109/JMEMS.2012.2221159 ↗
13. Penning · Philips Tech. Rev. · 1937 · 201
14. Penning, F. M. & Philips, N. V. Method and device for measuring pressures. U.S. Patent 2197079 (1940).
15. Operation of an inverted-magnetron gauge in the pressure range 10-3 to 10-12 mm. Hg10.1139/p58-031 ↗
16. Cold cathode gauges for ultrahigh vacuum measurements10.1116/1.580813 ↗
17. Performance of a combined magnetron pump-gauge at ultrahigh vacuum10.1016/0039-6028(80)90458-6 ↗
18. Measurement of vacuum: 1950–200310.1116/1.1599871 ↗
19. COPS - a novel pressure gauge using MEMS devices for space
20. Investigation of ionization gauges with carbon nanotube (CNT) field-emitter cathodes10.1088/1742-6596/100/9/092007 ↗
21. MEMS type ionization vacuum sensor10.1016/j.sna.2016.05.021 ↗
22. Miniature Penning ionization gauge for pulsed gas measurements10.1063/1.1137637 ↗
23. InstruTech
24. Lesker.com
25. MKSinst.com
26. Pfeiffer Vacuum
27. VACOM
28. Halliday · 1981
29. Prototype
30. 3Dsystemscom
31. Matweb.com
32. Dielectric breakdown of polyimide films: Area, thickness and temperature dependence10.1109/TDEI.2010.5411997 ↗
33. Magnetic permeability of stainless steel for use in accelerator beam transport systems
34. Magnetics
35. Ulaby · 2015
36. Hayt · 2011
37. Haynes · 2016
38. Investigation of a low pressure Penning discharge10.1016/0031-8914(67)90086-9 ↗
39. The influence of the magnetic field strength upon the characteristic curve of a cold cathode ionization gauge10.1116/1.576629 ↗
40. Cold-cathode magnetron gauge characteristics10.1116/1.1492454 ↗
41. Lassiter · 1968
42. Rotationally resolved photoionization of O2+ near threshold10.1016/0009-2614(89)85005-5 ↗
43. State-selective ionization of nitrogen in the X2 = 0 and v = 1 states by two-color (1+1) photon excitation near threshold10.1063/1.457417 ↗
44. 1992
45. Starting delays in cold-cathode gauges at low pressures10.1116/1.579944 ↗