article·2013-01-01

Design and analysis of vacuum fixture in optical processing

Sun Zhen

Abstract

A vacuum fixture was designed to clamp the optical lens fastly and reliably in optical processing.And the deformation of the optical lens caused by the vacuum fixture was analyzed.First,the manual-static pressure-fast chuck and the traditional vacuum-cupule structure were used to design the vacuum fixture,based on the requirement of optical processing.Further,the deformation of the lens caused by the vacuum fixture was analyzed based on simulation.And,modification was done to optimize the structure of the vacuum fixture.Finally,new simulation was performed to verify the new structure of the vacuum fixture.The simulation results show that the largest deformation on the surface of the lens,caused by vacuum fixture with protective layer,range from 0.1μm to 0.32μm,which is 1/14 times of the deformation without protective layer.This vacuum fixture can be applied in high-precision optical processing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Measurement and Metrology Techniques · Advanced optical system design · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.