Material-related effects during ion beam treatment by an end-Hall ion source
Source abstract
Abstract
Abstract Reproducibility and accuracy of dry etching processes are a challenge for the operators of end-Hall ion sources with hot filament (HF) neutralizer. The variation of the neutralization current IN, e.g. due to filament aging as well as the properties of the substrate material lead to changes in the resulting etch rate of the substrate. Therefore a special controller setup was developed to automatically neutralize the ion beam of an end-Hall ion source with HF by measurement of the substrate current and control of an introduced difference current (ID). In this study, the influence of conductive (amorphous CuTi-film), semi-conductive (B-doped Si(100)) and non-conductive material (128°YX LiNbO3) on ID is demonstrated. Additionally, the etch rate for a wide process regime (VA and IA) for Si(100), the surface roughness for defined under- and overneutralization and the properties of the etched sidewalls were investigated. The effect of the gas distributor ring material on the etch rate is also shown.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Semiconductor materials and devices · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Kaufman HR, Robinson RS. End-Hall ion source. patent no.: F03H 5/00 ed: Kaufman et al.; 1989.
2. Polymer pre-treatment by linear anode layer source plasma for adhesion improvement of sputtered TiN coatings10.1016/j.vacuum.2008.06.006 ↗
3. Surface engineering with ion beams: from self-organized nanostructures to ultra-smooth surfaces10.1007/s00339-008-4516-0 ↗
4. Large area smoothing of surfaces by ion bombardment: fundamentals and applications10.1088/0953-8984/21/22/224026 ↗
5. The morphology of amorphous SiO2 surfaces during low energy ion sputtering10.1088/0953-8984/21/49/495305 ↗
6. Zhurin · 2011
7. Kaufman · 2003
8. Kaufman · 2003
9. Kaufman HR, Kahn JR, Zhurin VV. Ion-source neutralization with a hot-filament cathode-neutralizer. patent no.: H01J 23/00; H01J 7/24 ed: Kaufman & Robinson, Inc., Ft. Collins, CO (US); 2004.
10. Inc VI · 2006
11. Zhurin · 2009
12. Zhurin · 2012
13. Zhurin · 2012
14. Self-compensation of the focused ion beam space charge
15. Low-energy ion-beam space-charge neutralization10.1063/1.1144941 ↗
16. Filamentless neutralization of broad ion-beams10.1116/1.585316 ↗
17. End-Hall ion source10.1116/1.574924 ↗
18. Zhurin · 2010
19. Ion milling-induced ESD damage during MR head fabrication10.1016/S0304-3886(99)00036-4 ↗
20. Neutralization of an ion beam from the end-Hall ion source by a plasma electron source based on a discharge in crossed E × H fields10.1134/S1063784209100090 ↗
21. Physics and modeling of an end-Hall (gridless) ion source10.1063/1.3572053 ↗
22. Evaluation of a mobile vacuum transfer system for in vacuo XPS analysis using as-deposited Ti thin-films10.1016/j.vacuum.2015.04.001 ↗
23. Cuomo · 1989
24. Geissler SJ, Kahn JR, Kaufman HR, Shaw DM. Power supply for a hot-filament cathode. Google Patents; 2005.
25. Richardson · 1921
26. Lutz · 2014
27. Damascene technique applied to surface acoustic wave devices10.1116/1.2404684 ↗
28. Novel technology for SAW based microfluidic devices with buried interdigital transducer electrodes
29. Low-energy ion-bombardment induced roughening and smoothing of SiO2 surfaces10.1063/1.108957 ↗
30. Review of profile and roughening simulation in microelectronics plasma etching10.1088/0022-3727/42/19/194014 ↗
31. Wasa · 2012
32. Lubos · 2005
33. Metal-free and gasless space charge compensation of low energy ion beam by using surface-carbonized silicon field emitter array