Studies on the use of the coaxial plasma bulb for enhanced wettability of aluminum and polymethylmethacrylate surfaces
Source abstract
Abstract
Abstract The use of a short coaxial plasma line termed the “plasma bulb” has been investigated for enhancement of the wettability of aluminum (Al) and polymethylmethacrylate (PMMA) surfaces. In comparison with other plasma lines, the plasma bulb uses a single magnetron for microwave generation that could produce plasma for surface treatment. For the treatments of Al and PMMA surfaces, various plasma parameters including gas filling pressure, microwave power and treatment time were investigated for different working gases: argon, oxygen and air. Based from contact angle measurements, the largest increase in the wettability of Al (93.8%) and PMMA (76.2%) samples were obtained using air plasma for 5 min and 10 min treatment time, respectively. AFM and EDX results reveal that increased root-mean-square roughness and possible generation of oxygen-containing groups on the surface are the dominant factors contributing to the enhanced wettability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Plasma Diagnostics and Applications · Plasma Applications and Diagnostics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Enhanced adhesion of epoxy-bonded steel surfaces using O2/Ar microwave plasma treatment10.1016/j.ijadhadh.2012.07.009 ↗
2. Structural and optical characterization of PMMA surface treated in low power nitrogen and oxygen RF plasmas
3. Feasibility study of material surface treatment using an atmospheric large-area glow plasma10.1016/j.tsf.2005.08.081 ↗
4. Enhancement of paint adhesion to cold rolled steel in salt bath by low temperature Ar–H2 plasmas10.1016/j.vacuum.2006.03.004 ↗
5. Plasma surface engineering - innovative processes and coating systems for high-quality products10.1016/S0257-8972(98)00833-0 ↗
6. Influence of process parameters of oxygen cold plasma treatment on wettability ageing time of 2024 aluminium alloy10.1016/j.ijadhadh.2008.01.009 ↗
7. Plasma-assisted removal of organic contaminants inside cavities10.1016/j.vacuum.2008.05.013 ↗
8. Remote and direct cleaning by use of microwave plasma source SLAN II: comparative study10.1016/S0257-8972(97)80006-0 ↗
9. Correlation of wettability and superficial cleaning of 2024 aluminium alloy with air cold plasma treatment time10.1007/s00170-004-2061-3 ↗
10. A numerical model of the Plasmaline® microwave plasma source
11. Microwave PECVD for large coating10.1016/j.surfcoat.2005.02.061 ↗
12. Duo-Plasmaline—a linearly extended homogeneous low pressure plasma source10.1016/S0257-8972(97)00015-7 ↗
13. Plasma treatment of polypropylene containing different additives
14. Investigating a coaxial linear microwave discharge10.1088/0022-3727/44/38/385202 ↗
15. Enhancement of adhesion strength between two AISI 316 L stainless steel plates through atmospheric pressure plasma treatment10.1016/j.surfcoat.2005.06.020 ↗
16. Ward P. Plasma cleaning techniques and future applications in environmentally conscious manufacturing, Sandia National Laboratories Report, New Mexico.
17. Evaluation of surface and bonding properties of cold rolled steel sheet pretreated by Ar/O2 atmospheric pressure plasma at room temperature10.1016/j.jmatprotec.2008.11.043 ↗
18. Surface characteristics of AISI 304 L stainless steel after an atmospheric pressure plasma treatment10.1016/j.surfcoat.2004.07.071 ↗
19. Surface modification of PMMA by DC glow discharge and microwave plasma treatment for the improvement of coating adhesion10.1016/S0257-8972(01)01202-6 ↗
20. Wettability improving of 2024 aluminium alloy by oxygen cold plasma treatment10.1007/s00170-005-0214-7 ↗
21. Tsai · 1994
22. 2024 aluminium alloy wettability and superficial cleaning improvement by air cold plasma treatment10.1016/j.jmatprotec.2008.03.061 ↗
23. Surface characterization and morphology in Ar-plasma-treated polypropylene blend10.1007/BF03218631 ↗