Ar beam induced desorption from different materials at TSL
Source abstract
Abstract
This paper describes new experiments on the heavy ion desorption yield measurements with 5 MeV/u Ar8+ and summarizes all results of experiments with 5 MeV/u Ar8+ performed at The Svedberg Laboratory in Uppsala (Sweden). These results are important for the update and design of the FAIR facility at the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt (Germany) where the required increase in beam intensity is limited by ion induced pressure instability. It was shown that lowest desorption yields can be achieved with gold coatings, whereas grazing incident loss increases the desorption yield by roughly an order of magnitude compared to perpendicular loss. The desorption yield of saturated NEG samples was measured to be higher compared to any non pumping samples. The desorption yield of copper can be lower and higher compared to stainless steel depending on cleaning procedure and sample history. Additionally the secondary electron and ion yield was measured to be a few tens of electrons and ions emitted per projectile impact in backward direction. Their influence on the desorption yield due to secondary effects was less than 5% compared to the primary desorption by the high energetic projectile.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · X-ray Spectroscopy and Fluorescence Analysis · Nuclear Physics and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. FAIR Baseline Technical Report
2. Simulation of dynamic vacuum induced beam loss
3. High intensity uranium operation in SIS18
4. Hansen J, Laurent JM, Madsen N, Mahner E. LHC/VAC Note 2001-007, PS/AE Note 2001-009; 2001.
5. Gold beam losses at the AGS booster injection
6. Zhang SY. BNL C-A/AP/67; 2002.
7. Measurement and calculation of U28+ beam lifetime in SIS
8. Ion-stimulated gas desorption yields and their dependence on the surface preparation of stainless steel
9. Molecular desorption of stainless steel vacuum chambers irradiated with 4.2 MeV/u lead ions10.1103/PhysRevSTAB.6.013201 ↗
10. Mahner · Phys Rev ST Accel Beams · 2004 · 7 · 10320210.1103/PhysRevSTAB.7.103202 ↗
11. Gas desorption and electron emission from 1 MeV potassium ion bombardment of stainless steel10.1103/PhysRevSTAB.7.093202 ↗
12. Zhang · 2005 · 216
13. Kollmus · 2005 · 207
14. Heavy-ion-induced electronic desorption of gas from metals10.1103/PhysRevLett.98.064801 ↗
15. Review of heavy-ion induced desorption studies for particle accelerators10.1103/PhysRevSTAB.11.104801 ↗
16. Energy scaling of the ion-induced desorption yield for perpendicular collisions of Ar and U with stainless steel in the energy range of 5 and 100 MeV/u10.1116/1.3065979 ↗
17. Ar ion induced desorption yields at the energies 5–17.7 MeV/u10.1016/j.nima.2008.09.052 ↗
18. A new test stand for heavy ion induced gas desorption measurements at TSL10.1016/j.nima.2007.12.020 ↗
19. Secondary-electron yields from thin foils: a possible probe for the electronic stopping power of heavy ions10.1103/PhysRevA.41.2521 ↗
20. Omet C. Kollimatorsystem zur Stabilisierung des dynamisches Restgasdruckes im Schwerionen-synchrotron SIS18. Dissertation Technische Hochschule Darmstadt, GSI Reprint; 2009-01 January.
21. Activation and measurement of non-evaporable getter films10.1116/1.3081969 ↗
22. Benvenuti · Vacuum · 2003 · 71 · 30710.1016/S0042-207X(02)00755-8 ↗
23. Influence of deposition pressure and pulsed DC sputtering on pumping properties of Ti–Zr–V non–evaporable getter films10.1116/1.3112623 ↗
24. Matsunami · Nucl Instrum Methods Phys Res B · 2002 · 193 · 83010.1016/S0168-583X(02)00912-6 ↗
25. Matsunami · Nucl Instrum Methods Phys Res B · 2002 · 209 · 28810.1016/S0168-583X(02)02050-5 ↗
26. Desorption yields of differently treated copper samples characterized with ERDA10.1016/j.nimb.2006.12.101 ↗
27. An inelastic thermal spike model to calculate ion induced desorption yields10.1016/j.nimb.2009.02.039 ↗
28. Temperature dependence of the electron induced gas desorption yields on stainless steel, copper, and aluminum10.1116/1.580852 ↗
29. The effect of bakeout temperature on the electron and ion induced gas desorption coefficients of some technological materials10.1016/S0042-207X(79)80335-8 ↗