RBS and ERD study of epitaxial RuO2 films deposited on different single crystal substrates
Source abstract
Abstract
Abstract A study of ruthenium dioxide films, deposited by an MOCVD method on Si/SiO2, Si/YSZ, LaAlO3, MgO, SrTiO3, and sapphire single crystal substrates, was performed using RBS, ERD and AFM methods with the aim to characterize the elemental composition, microstructural quality, and homogeneity of the films. The element depth distribution and thickness of the ruthenium oxide films were obtained using a simulation procedure. RuO2 films of a thickness of several hundred nanometres, keep a constant 1:2 ruthenium to oxygen atomic concentration ratio inside the layer, but they exhibit rather extensive substrate/film interface with mixed contents of elements. It is caused by an overlay of three factors—the interdiffusion of substrate and film elements, interface roughness, and surface roughness. Hydrogen content up to 18% in the subsurface region was proved by ERD. This fact can explain only partly a decrease in the ruthenium atomic concentration at the subsurface region. The other factor that plays a role is probably surface roughness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. Green · J Electrochem Soc: Solid-State Sci Technol · 1985 · 132 · 267710.1149/1.2113647 ↗
2. Krusin-Elbaum · Appl Phys Lett · 1987 · 50 · 187910.1063/1.97673 ↗
3. Wang · J Mater Res · 1997 · 12 · 98410.1557/JMR.1997.0139 ↗
4. Fröhlich · J Cryst Growth · 2002 · 235 · 37710.1016/S0022-0248(01)01907-8 ↗
5. Shirokov · Nucl Instrum Methods B · 1993 · 84 · 497
6. Mayer M. Technical Report IPP 9/113 Max-Planck-Institut für Plasmaphysik, Garching. Germany, 1997.