journal article·2015-11

Laser induced fluorescence monitoring of the etching processes with the inward plasma

Jun Miyawaki, Toshitaka Kubo, Atsushi Ando, Satoshi Takahashi, Shun'ichiro Shimbori, Hiroshi Tokumoto, Tetsuo Shimizu

Vacuum· Volume 121
Publisher page

Abstract

Abstract Laser induced fluorescence (LIF) spectroscopy has been used to monitor the etching processes in a localized plasma etching system. An inward plasma was employed for etching in which etching gas was discharged in the narrow gap between the etched sample and the entrance of an evacuating capillary tube. By observing the LIF spectrum, it was confirmed that the etch product SiF2 exists near the both Si and SiO2 sample surfaces being etched with CF4 inward plasma. The plasma gas temperature was estimated to be ∼400 K from the comparison of the LIF spectrum with the rotational simulation. LIF method was applied to the etching endpoint detection of two kinds of material, thermally-grown SiO2 on Si and spin-coated Polyimide Isoindoro Quinazorindione (PIQ) film on Si. The endpoint was detected from the onset of SiF2 production by the etching of Si substrate in the case of PIQ/Si. The signal intensity of SiF2 from the Si substrate during etching was several times larger than that from the SiO2 layer, and thus, the endpoint of SiO2 etching was detected by the abrupt increase of SiF2 signal. The etch rates of PIQ and SiO2 at the center of the capillary were determined to be 1.09 μm/min and 1.66 μm/min, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Semiconductor materials and devices · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Development of localized plasma etching system for failure analyses in semiconductor devices10.3131/jvsj2.53.234 ↗
2. Capacitively coupled capillary plasma sources10.3131/jvsj2.53.165 ↗
3. Test & test equipment
4. Development of localized plasma etching system for failure analyses in semiconductor devices: (3) etching-monitoring using quadruploe mass spectrometry10.3131/jvsj2.55.171 ↗
5. Absolute total and partial cross sections for the electron impact ionization of tetrafluorosilane (SiF4)10.1063/1.1333018 ↗
6. Plasma etching endpoint detection using multiple wavelengths for small open-area wafers10.1116/1.1331294 ↗
7. SiF2 as a primary desorption product of Si etching by F atoms: interpretation of laser-induced fluorescence spectra; rate constant of the gas phase SiF2 + F reaction10.1063/1.349197 ↗
8. Laser-induced fluorescence study of silicon etching process: detection of SiF2 and CF2 radicals10.1063/1.337489 ↗
9. Laser-induced fluorescence detection of SiF2 as a primary product of Si and SiO2 reactive ion etching with CF4 gas10.1088/0963-0252/6/3/012 ↗
10. Spatially resolved SiF and SiF2 densities in inductively driven discharges containing C2F6 and C4F810.1063/1.1410897 ↗
11. Rotational analysis of absorption bands in the 2266 Å system of SiF210.1016/0022-2852(70)90104-9 ↗
12. Vibrational and electronic energy levels of polyatomic transient molecules10.1063/1.1497629 ↗
13. Development of localized plasma etching system for failure analyses in semiconductor devices: (4) precise temperature measured during plasma etching10.3131/jvsj2.55.176 ↗
14. Polymer materials for electronic applications