journal article·2019-05

Fabrication of nanoporous thin films via radio-frequency magnetron sputtering and O2 plasma ashing

Seong Woo Jang, Sehoon Hwang, Sang Ho Lim, Seunghee Han

Vacuum· Volume 163
Publisher page

Abstract

Abstract In this study, we report a new method for fabricating nanoporous thin films. In the first step, metal–carbon thin films were prepared by radio-frequency reactive magnetron sputtering, using Cu, Ni, and Ti targets as the metal sources and CH4 gas as the carbon source during the co-deposition process. In the second step, the metal–carbon films were then oxidized by an oxygen plasma generated with a flowing a gas mixture of Ar and O2, and nanoporous metal–oxide films were obtained by removing carbon atoms from the metal–carbon thin films. The pores in the films varied with the amount of carbon in the film surface, and mesopores grew to lager macropores as the flow rate of CH4 was increased. Depending on the film composition, the calculated porosity varied from 50% to 90%. With advantages such as a wide range of suitable raw materials and good reproducibility, this fabrication method is expected to offer a new approach to the commercial production of nanoporous materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Anodic Oxide Films and Nanostructures · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Fabrication of novel nanoporous copper powder catalyst by dealloying of ZrCuNiAl amorphous powders for the application of wastewater treatments10.1016/j.jhazmat.2017.07.022 ↗
2. Low temperature CO oxidation over unsupported nanoporous gold10.1021/ja0675503 ↗
3. Realization and characterization of porous gold for increased protein coverage on acoustic sensors10.1021/ac049893u ↗
4. Fabrication of nanoporous copper film for electrochemical detection of glucose10.1002/elan.200904697 ↗
5. Nanoporous copper oxide ribbon assembly of free-standing nanoneedles as biosensors for glucose10.1039/C5AN00609K ↗
6. Surface enhanced Raman scattering of nanoporous gold: smaller pore sizes stronger enhancements10.1063/1.2722199 ↗
7. Patterned nanoporous gold as an effective SERS template10.1088/0957-4484/22/29/295302 ↗
8. Nanoporous copper with tunable nanoporosity for SERS applications10.1002/adfm.200801239 ↗
9. Fabrication of large-scale nanoporous nickel with a tunable pore size for energy storage10.1016/j.jpowsour.2013.08.070 ↗
10. Fabrication and textural characterization of nanoporous carbon electrodes embedded with CuO nanoparticles for supercapacitors10.1088/1468-6996/12/4/044602 ↗
11. Evolution of nanoporosity in dealloying10.1038/35068529 ↗
12. Pattern formation during dealloying10.1016/S1359-6462(03)00471-8 ↗
13. Electrochemical fabrication of nanoporous copper films in choline chloride-urea deep eutectic solvent10.1039/C5CP01276G ↗
14. Fabrication and characterization of monolithic nanoporous copper through chemical dealloying of Mg-Cu alloys10.1016/j.corsci.2009.05.043 ↗
15. Templated nanoporous copper and nickel: novel substrates for surface-enhanced Raman scattering10.1016/j.scriptamat.2008.07.033 ↗
16. Morphological control in colloidal crystal templating of inverse opals, hierarchical structures, and shaped particles10.1021/cm702107n ↗
17. Electrochemical and scanning tunneling microscopic study of dealloying of Cu3Au10.1149/1.2085396 ↗
18. Unusual dealloying effect in Gold/Copper alloy thin films: the role of defects and column boundaries in the formation of nanoporous gold10.1021/am5065816 ↗
19. Coercivity of nanoporous Ni produced by dealloying10.1063/1.3119663 ↗
20. Dealloying by metallic melt10.1016/j.matlet.2011.01.054 ↗
21. Nanoporous thin films obtained by oblique angle deposition of aluminum on porous surfaces10.1016/j.surfcoat.2018.05.022 ↗
22. Non-enzymatic hydrogen peroxide detection at NiO nanoporous thin film- electrodes prepared by physical vapor deposition at oblique angles10.1016/j.electacta.2017.03.087 ↗
23. Combinatorial fabrication of composite nanorods using oblique angle co-deposition10.1088/0957-4484/27/36/365304 ↗
24. Fabrication of shrub-like CuO porous films by a top-down method for high-performance ethanol gas sensor10.1016/j.vacuum.2018.09.004 ↗
25. Nanoporous Ca3Co4O9 thin films for transferable thermoelectrics10.1021/acsaem.8b00333 ↗
26. Fabrication of nanoporous noble metal thin films by O2 plasma dealloying10.1016/j.tsf.2017.04.025 ↗
27. Estimating surface diffusion coefficients10.1016/0079-6816(95)00039-2 ↗
28. Nanoscale Kirkendall effect and oxidation kinetics in copper nanocrystals characterized by real-time, in situ optical spectroscopy10.1002/ppsc.201400155 ↗
29. Synthesis and characterisation of nickel oxide nanofibre webs with alcohol sensing characteristics10.1039/C4RA11083H ↗
30. A comprehensive review of techniques for biofunctionalization of titanium10.5051/jpis.2011.41.6.263 ↗