journal article·2017-12

Effect of TiO2 addition on the densification behavior, microstructure and mechanical properties of Al2O3-Cr cermets prepared via vacuum sintering

Yijie Zhao, Yong Zheng, Weimin Ding, Wei Zhou, Guotao Zhang, Zili Liu, Lixin Yu

Vacuum· Volume 146
Publisher page

Abstract

Abstract Five cermets with composition of Cr-(45-x)Al2O3-xTiO2 (x = 0, 2, 4, 8 and 16 wt%) were prepared by vacuum sintering. The effects of TiO2 addition on the densification behavior, phase composition, microstructure and transverse rupture strength (TRS) of the prepared cermets were studied. The addition of TiO2 decreased effectively the full densification temperature of Al2O3-Cr cermets from 1700 °C to 1500 °C. A new Cr2Ti6O15 phase formed in the Al2O3-Cr cermets with 2–16 wt% TiO2 additions sintered at 1500 °C, and its volume fraction increased gradually with increasing TiO2 additions. The Cr2Ti6O15 phase improved the microstructure and decreased the porosity for cermets with 2 wt% TiO2 additions, accordingly resulting in the highest TRS of 447 MPa. However, when the addition of TiO2 exceeded 8.0 wt%, lots of residual pores exhibited in the Cr2Ti6O15 phase of those cermets, obviously reducing the TRS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Processing, microstructure and mechanical properties of Al2O3-Cr nanocomposites10.1016/j.jeurceramsoc.2006.05.093 ↗
2. Properties of sintered Al2O3-Cr composites depending on the method of preparation of the powder mixture10.2298/SOS0603231C ↗
3. Fundamental study and equipment for sintering and testing of cermet bodies: V, Fabrication, testing and properties of 30 chromium-70 alumina cermets10.1111/j.1151-2916.1951.tb13479.x ↗
4. Effect of rhenium addition on wear behavior of Cr-Al2O3 metal matrix composites10.1007/s11665-015-1462-9 ↗
5. Tinklepaugh · 1960
6. Influence of MnO and TiO2 additives on density, microstructure and mechanical properties of Al2O310.1016/S0272-8842(01)00077-3 ↗
7. Winkler · 1971
8. Anisotropic grain growth in doped-TiO2 alumina10.1016/0921-5093(94)06516-0 ↗
9. Effects of residual porosity on the properties of tungsten carbide-cobalt hard alloys10.1007/BF00798346 ↗