The study of influence of working pressure on mode conversion of argon radio-frequency inductively coupled plasma
Source abstract
Abstract
Abstract Electron temperature and plasma density was measured with change of working air pressure by Langmuir probe at a given power. Radio-frequency (rf) inductively coupled plasma (ICP) discharge mode conversion is determined by optical emission spectrum (OES) with the increase of gas pressure at different power. The results indicate that plasma discharge mode can change from E mode to H mode and spectral intensity appears inverse hysteresis phenomenon with the change of air pressure. The hysteresis width decreases with the increase of power and the hysteresis is no longer present when the power is 420 W and 435 W. Moreover, the jump pressure of E-H transition is gradually reduced with the corresponding increase of discharge power. ICP discharge mode appears E-H-E phenomenon with the increase of air pressure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Plasma Diagnostics and Applications · Metal and Thin Film Mechanics · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Characterization of the E to H transition in a pulsed inductively coupled plasma discharge with internal coil geometry: bi-stability and hysteresis10.1088/0963-0252/8/4/309 ↗
2. Temporal behavior of the E to H mode transition in an inductively coupled argon discharge
3. On the heating mode transition in high-frequency inductively coupled argon discharge10.1063/1.873206 ↗
4. On the hysteresis in E to H and H to E transitions and the multistep ionization in inductively coupled plasma10.1063/1.2734501 ↗
5. A simple analysis on the abnormal behavior of the argon metastable density in an inductively coupled Ar plasma10.1016/j.tsf.2010.03.135 ↗
6. Characterization of the E to H transition in a pulsed inductively coupled plasma discharge with internal coil geometry: bi-stability and hysteresis10.1088/0963-0252/8/4/309 ↗
7. Observation of inverse hysteresis in the E to H mode transitions in inductively coupled plasma10.1088/0963-0252/19/1/015011 ↗
8. Effects of impedance matching network on the discharge mode transitions in a radio-frequency inductively coupled plasma10.1063/1.2931038 ↗
9. Spatial distribution study of argon radio-frequency inductively coupled plasma in inverse hysteresis transition area10.1016/j.vacuum.2015.05.031 ↗
10. Lieberman · 2005
11. Huaqiao · 1993 · 29
12. Mode transitions in low pressure rare gas cylindrical ICP discharge studied by optical emission spectroscopy10.1088/0022-3727/37/20/009 ↗
13. Electrical optical characterisation of capacitively and inductively coupled GEC reference cells10.1016/S0042-207X(99)00159-1 ↗
14. Ion energy distribution in an ECR plasma chamber10.1016/S0042-207X(98)00323-6 ↗
15. Investigation on the deposition proce of silicon nitride thin film prepared by ECR-PECVD10.7498/aps.48.1309 ↗
16. Diagnosis of hydrogen plasmas at low temperature and low pressure by spectroscopy and Langmuir probe
17. Langmuir probe diagnosis of bydrogen plasma induced by helicon-wave under low pressure10.3788/HPLPB20102206.1234 ↗
18. Hysteresis and mode transition interms of electron energy distribution function for an inductively coupled argon discharge10.1063/1.2905213 ↗