High vacuum measurements and calibrations, molecular flow fluid transient effects
Source abstract
Abstract
Abstract High vacuum pressure measurements and calibrations below ≈1 × 10−6 Torr are problematic. Specifically, measurement accuracies change drastically for vacuum gauges when pressures are suddenly lowered in vacuum systems. How can gauges perform like this? To answer this question, a brief system description is first required. Calibrations were performed using a vacuum calibration chamber with attached vacuum gauges. To control chamber pressures, vacuum pumps decreased the chamber pressure while nitrogen tanks increased the chamber pressure. By balancing these opposing pressures, equilibrium in the chamber was maintained at selected set point pressures to perform calibrations. When pressures were suddenly decreased during set point adjustments, a sudden rush of gas from the chamber also caused a surge of gas from the gauges to decrease the pressures in those gauges. Gauge pressures did not return to equilibrium as fast as chamber pressures due to the sparse distribution of gas molecules in the system. This disparity in the rate of pressure changes caused the pressures in different gauges to be different than expected. This discovery of a new theory was experimentally proven to show that different gauge designs return to equilibrium at different rates, and that gauge accuracies vary for different gauge designs due to fluid transients in molecular flow.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Scientific Measurement and Uncertainty Evaluation · Advanced Sensor Technologies Research · Radioactive Decay and Measurement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. ISO/IEC 17025 · 2005
2. JCGM 100 · 2008
3. Taylor · 1994
4. ASME B89.7.3.1 · 1989
5. Colemen · 1989
6. ISO/TS 3567-2005 · 2005
7. ISO 27893-2011 · 2011
8. 1989
9. Boltzman · 1964
10. Umrath · 2007
11. Pfeiffer Vacuum. The vacuum technology book, part 2: know-how book. http://www.pfeiffer-vacuum.com [accessed December 2014].
12. John · 1984
13. Stamford. Connecticut: Omega Engineering, Inc. http://www.omega.com/literature/transactions/volume3/high3.html [accessed March 2015].
14. Ringoes. New Jersey: Scientific Instrument Services. http://www.sisweb.com/vacuum/sis/inlinga.htm [accessed March 2015].
15. Kurt J. Pressure measurement technical notes. Pittsburg, Pennsylvania: Lesker Company. http://www.lesker.com/newweb/gauges/gauges_technicalnotes_1.cfm [accessed December 2014].
16. Leishear · 2013
17. Vincetti · 1965
18. Leishear · 2013