Element distribution and phase constitution of Al2O3–TiC/W18Cr4V vacuum diffusion bonded joint
Source abstract
Abstract
Abstract Vacuum diffusion bonding between Al 2 O 3 –TiC ceramic composites and W18Cr4V tungsten-based tool alloy has been carried out by using Ti/Cu/Ti multi-interlayer. Element distribution near the Al 2 O 3 –TiC/W18Cr4V interface was discussed and fracture morphology was analyzed using electron probe microanalysis. Additionally, phase constitutions of the Al 2 O 3 –TiC/W18Cr4V joint were determined by X-ray diffraction. The results indicate that Ti-rich layers are formed near both Al 2 O 3 –TiC and W18Cr4V. The Ti-rich layer near Al 2 O 3 –TiC helps to wet the Al 2 O 3 –TiC surface. The Ti-rich layer near W18Cr4V can restrain the formation of Fe–Ti intermetallic compounds in the diffusion transition zone. Residual Cu in the diffusion transition zone can act as a stress releasing zone. The structures of interfacial phases are identified as follows: Al 2 O 3 –TiC/TiO + Ti 3 Al/Cu + CuTi/TiC layer/mixed layer of Fe 3 W 3 C, Cr 23 C 6 and α-Fe/W18Cr4V. The fracture morphology of Al 2 O 3 –TiC/W18Cr4V joint appears brittle features and the failure occurs within the Al 2 O 3 –TiC ceramic.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Self-lubrication of Al2O3/TiC/CaF2 ceramic composites in sliding wear tests and in machining processes10.1016/j.matdes.2005.12.003 ↗
2. Wear characteristic of alumina coated and alumina ceramic tools10.1016/S0924-0136(96)02626-X ↗
3. Interfacial morphologies between alumina and silver -copper-titanium alloy10.1023/A:1018696812523 ↗
4. Interfacial reactions between sapphire and silver-copper-titanium thin film filler metal10.1111/j.1151-2916.1997.tb02849.x ↗
5. Assessment of melting behavior of Cu-coated Ti powders using thermal analysis10.1016/j.msea.2003.10.272 ↗
6. Kinetics of interlayer formation on polycrystalline α-Al2O3/copper-titanium alloy interface10.1007/BF02652309 ↗
7. Finite-element analysis of residual stresses in Al2O3–TiC/W18Cr4V diffusion bonded joints10.1016/j.commatsci.2008.10.019 ↗
8. Interface microstructure and shear strength in the diffusion brazing joint of TiC–Al2O3 ceramic composite with W18Cr4V tool steel10.1007/s11003-009-9165-8 ↗
9. Diffusion bonding of Al2O3–TiC composite ceramic and W18Cr4V high speed steel in vacuum10.1016/j.vacuum.2009.07.012 ↗
10. ASM handbook
11. Microstructural study of the brazed joint between alumina and Ti-6AI-4V alloy10.1111/j.1151-2916.1990.tb09799.x ↗
12. Al2O3/Ti interlayer/AISI 304 diffusion bonded joint microstructural characterization of the two interfaces10.1016/S1044-5803(00)00095-4 ↗
13. Effect of interfacial thickness and residual stress on the mechanical property of the alumina-stainless steel braze joint interface
14. Bonding characteristics and diffusion barrier effect of the TiC phase formed at the bonding interface in an explosively welded titanium/high-carbon steel clad10.1007/BF02645348 ↗
15. Interface reactions between titanium thin films and (11¯2) sapphire substrates10.1007/BF02387808 ↗